MT 6 - TC 59/SC 59K/MT 6
TC 59/SC 59K/MT 6
General Information
Frequently Asked Questions
MT 6 is a Technical Committee within the International Electrotechnical Commission (IEC). It is named "TC 59/SC 59K/MT 6". This committee has published 52 standards.
MT 6 develops IEC standards in the area of Information technology. Currently, there are 52 published standards from this technical committee.
The International Electrotechnical Commission (IEC) is the world's leading organization for the preparation and publication of international standards for electrical, electronic, and related technologies. Founded in 1906, the IEC provides a global platform for companies, industries, and governments to meet, discuss, and develop the international standards they require.
A Technical Committee (TC) in IEC is a group of experts responsible for developing international standards in a specific technical area. TCs are composed of national member body delegates and work through consensus to create standards that meet global industry needs. Each TC may have subcommittees (SCs) and working groups (WGs) for specialized topics.
IEC 60350-2:2025 defines methods for measuring the performance of electric hobs for household use. Appliances covered by this document can be built-in or designed to be placed on a work surface. The hob can be part of a cooking range and it can have an integrated cooking fume extractor, i.e. a hob with down-draft system . This document defines the main performance characteristics of hobs which are of interest to the user and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. Some of the tests which are specified in this document are not considered to be reproducible since the results can vary between laboratories. They are therefore intended for comparative testing purposes only. This document does not deal with safety requirements (IEC 60335-2-6 and IEC 60335-2-9). This document is also applicable for portable appliances with similar functionality. This third edition cancels and replaces the second edition published in 2017 and Amendment 1:2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new definitions for portable hob, hob with down-draft system and low power modes are amended in Clause 3;
b) revision of Clause 5: Tolerance for water amount added, requirements for dimension measurement added;
c) removal of 6.4 Level of solid hotplates;
d) revision of Clause 7 in order to improve the application of the smoothing average;
e) revision of Table 1 and Table 3 in order to amend missing tolerances:
f) Ry replaced by L* in Clause 9 and reference to IEC TS 63350;
g) requirements for digital assessment in 9.1.6 removed as they are covered in IEC TS 63350;
h) revision of Clause 12 Power measurement of low power modes;
i) removal of Clause 13 Spillage capacity of hobs;
j) Annex G Low-power mode measurements added;
k) removal of Annex D 'Shade chart' as the shade charts are specified in IEC TS 63350;
l) removal of Annex E 'Data and calculation sheet' as the calculation sheet is substituted by a
supporting document located on the IEC web site;
m) update of former Annex F 'Addresses of suppliers' by removal of former Clause F.6, F.7 and F.8 and by adding a further possible supplier in new D.4
- Standard160 pagesEnglish and French languagesale 15% off