CEN/TC 383/WG 3 - Biodiversity and environmental aspects

This document specifies a set of rules and procedures as a framework for conformity assessment describing biofuels and bioliquids as the objects of conformity assessment, identifying the applicable specified requirements and providing the methodology for performing conformity assessment. It (this set of rules and procedures) defines requirements for provision by economic operators of the required evidence that biofuels and bioliquids fulfil the sustainability criteria as defined in the Renewable Energy Directive [1] and in Directive 2015/1513 [3]. This document is applicable to the initial biomass production or to the point of collection for waste and residue and to each stage within the chain of custody. It also defines requirements on conformity assessment bodies when checking compliance with the present standard.
NOTE 1   This edition of the standard does not cover the requirements in Directive 2018/EU/2001, the recast of the Renewable Energy Directive (referred to as RED II).
NOTE 2   An example of supply chain of biofuels and bioliquids to be covered by the chain of custody is given in Figure 1. This supply chain is a simple representation, actual supply chains are typically more complex.
Figure 1 - Example of a supply chain of biofuels and bioliquids

This European Standard defines the terminology to be used in the field of sustainability criteria for the production of biofuels and bioliquids for energy applications. This European Standard specifically considers some relevant terms and definitions used in the European Commission Directive 2009/28/EC [1], referred to as Renewable Energy Directive (RED), and in the European Commission Directive 2009/30/EC [2] referred to as Fuel Quality Directive (FQD), or in other European regulations.

This European Standard specifies a detailed methodology that will allow any economic operator in a biofuel or bioliquid chain to calculate the actual GHG emissions associated with its operations in a standardised and transparent manner, taking all materially relevant aspects into account. It includes all steps of the chain from biomass production to the end transport and distribution operations.
The methodology strictly follows the principles and rules stipulated in the RED and particularly its Annex V, the EC decision dated 10 June 2010 "Guideline for calculation of land carbon stocks" for the purpose of Annex V to Directive 2009/28/EC (2010/335/EU) [5] as well as any additional interpretation of the legislative text published by the EU Commission. Where appropriate these rules are clarified, explained and further elaborated. In the context of accounting for heat and electricity consumption and surpluses reference is also made to Directive 2004/8/EC [6] on "the promotion of cogeneration based on a useful heat demand in the internal energy market" and the associated EU Commission decision of 21/12/2006 "establishing harmonised efficiency reference values for separate production of electricity and heat" [7].
The main purpose of this standard is to specify a methodology to estimate GHG emissions at each step of the biofuel/bioliquid production and transport chain. The specific way in which these emissions have to be combined to establish the overall GHG balance of a biofuel or bioliquid depends on the chain of custody system in use and is not per se within the scope of this part 4 of the EN 16214 standard. Part 2 of the standard, addresses these issues in detail also in accordance with the stipulations of the RED. Nevertheless, Clause 6 of this part of the standard includes general indications and guidelines on how to integrate the different parts of the chain.

This document specifies procedures, criteria and indicators meeting the sustainability criteria of European Commission Directive 2018/EU/2001 (RED II), the recast of the Renewable Energy Directive, for agricultural biomass and forest biomass for energy applications, i.e. biofuels, bioliquids and biomass fuels. This document is applicable to production, cultivation and harvesting of biomass from agricultural land and forest land for biofuels, bioliquids and biomass fuel production.

This document defines the terminology to be used in the field of sustainability and greenhouse gas emission saving criteria for biomass for energy applications. This document specifically considers some relevant terms and definitions used in European Commission Directive 2018/EU/2001, the recast of the Renewable Energy Directive (RED II), and the European Commission Directive 2009/30/EC referred to as Fuel Quality Directive (FQD), or in other related European regulations.

This European Standard defines the terminology to be used in the field of sustainability criteria for the production of biofuels and bioliquids for energy applications. This European Standard specifically considers some relevant terms and definitions used in the European Commission Directive 2009/28/EC [1], referred to as Renewable Energy Directive (RED), and in the European Commission Directive 2009/30/EC [2] referred to as Fuel Quality Directive (FQD), or in other European regulations.
This revision is basically a small amendment to align the text with the new requirements following the iLUC Directive and include the changes listed in in document N 224 as agreed upon during the plenary meeting.

This European Standard specifies a detailed methodology that will allow any economic operator in a biofuel or bioliquid chain to calculate the actual GHG emissions associated with its operations in a standardised and transparent manner, taking all materially relevant aspects into account. It includes all steps of the chain from biomass production to the end transport and distribution operations.
The methodology strictly follows the principles and rules stipulated in the RED and particularly its Annex V, the EC decision dated 10 June 2010 "Guideline for calculation of land carbon stocks" for the purpose of Annex V to Directive 2009/28/EC (2010/335/EU) [5] as well as any additional interpretation of the legislative text published by the EU Commission. Where appropriate these rules are clarified, explained and further elaborated. In the context of accounting for heat and electricity consumption and surpluses reference is also made to Directive 2004/8/EC [6] on "the promotion of cogeneration based on a useful heat demand in the internal energy market" and the associated EU Commission decision of 21/12/2006 "establishing harmonised efficiency reference values for separate production of electricity and heat" [7].
The main purpose of this standard is to specify a methodology to estimate GHG emissions at each step of the biofuel/bioliquid production and transport chain. The specific way in which these emissions have to be combined to establish the overall GHG balance of a biofuel or bioliquid depends on the chain of custody system in use and is not per se within the scope of this part 4 of the EN 16214 standard. Part 2 of the standard, addresses these issues in detail also in accordance with the stipulations of the RED. Nevertheless, Clause 6 of this part of the standard includes general indications and guidelines on how to integrate the different parts of the chain.
Small amendment following plenary meeting decision.

This European Standard only defines procedures, criteria and indicators to provide the required evidence for:
-   production of raw material in areas for nature protection purposes;
-   harvesting of raw material from highly biodiverse non-natural grassland; and
-   cultivation and harvesting on peatland.
This European Standard specifies requirements relevant for the provision of evidence by economic operators that the production, cultivation and harvesting of raw materials is in accordance with legal or other requirements concerning the areas mentioned above.
This European Standard is applicable to production, cultivation and harvesting of biomass for biofuels and bioliquids production.