CEN/TC 207/WG 2 - Kitchen and bathroom furniture

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

This document specifies safety requirements and test methods for seating specifically intended for children who are able to walk and sit by themselves.
It applies to seating intended to be placed on the floor for domestic and non-domestic use including in day care centres and for indoor and outdoor use.
NOTE 1   Seating includes but is not limited to chairs, benches, stools, bean bags, deckchairs, rocking chairs, reclining chairs, armchairs, foldable chairs and swivel chairs.
It applies to the seating function only. If the seating has additional functions or can be converted into other products, the relevant European Standards could, in addition, apply. (See B.2).
It does not apply to children's highchairs, childcare articles such as reclined cradles and seating in educational institutions for which other European Standards exist.
NOTE 2   Seating in educational institutions are covered by the European Standards EN 1729-1 and EN 1729-2.
It does not apply to swing chairs, wheelchairs, electrical safety or seating for children with special needs.
The document contains 4 annexes as follows:
-   Annex A (informative) - Dimensional guidance for designing seating for children;
-   Annex B (informative) - Rationale for the inclusion of the safety requirements;
-   Annex C (informative) - Guidance for applicable tests according to seating size;
-   Annex ZA (informative) - Relationship between this European Standard and the safety requirements of Directive 2001/95/EC aimed to be covered.

This European Standard specifies safety requirements and test methods for mattresses including mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby beds, for domestic and non-domestic use.
This European Standard does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.

20201123 - TC - Corrects the element designation from "Mg" to "Mn" in the 12th dash of 6.1

This document specifies safety requirements and test methods for cribs (including cradles, suspended cribs and bedside sleepers) for domestic and non-domestic use.
The requirements apply to cribs with a maximum internal length of crib base of 900 mm which are intended to provide sleeping accommodation for infants, until they are able to sit unaided or pull or push themselves up on their hands and knees.
This document does not apply to electrical safety.
It does not apply to cribs used for medical purposes or used in hospitals.
Products that can be converted into other items may be covered by other relevant European Standards.
Annex A (informative) includes a rationale.
Annex B (informative) includes an A-deviation.

This European Standard specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
For cots that can be converted into other items e.g. changing units, playpens additional requirements can apply.
This European Standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This European Standard specifies test methods for assessing the safety of children's cots and folding cots for domestic use.
It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.

This European Standard specifies the safety requirements and test methods for playpens and folding playpens for domestic use, for a child with a body weight up to 15 kg.
If a playpen has several functions or can be converted into another function, it shall comply with the relevant standards.

This draft European Standard specifies safety requirements and test methods for mattresses including mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby beds, for domestic and non-domestic use.
This draft European Standard does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.

This part of EN 716 specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
Cots that can be converted into other items e.g. changing units, playpens should, when converted, comply with the relevant European standard for that item.
This standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This part of EN 716 specifies test methods for assessing the safety of children's cots and folding cots for domestic use.
It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.

This draft European Standard specifies safety requirements and test methods for mattresses including mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby beds, for domestic and non-domestic use.
This draft European Standard does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.

This part of prEN 1130 describes test methods that assess the safety of cribs and cradles for domestic use. The tests are designed to be applied to cribs/cradles that are fullly assembled and ready for use. NOTE: The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.

This part of European Standard prEN 1130 specifies safety requirements for cribs/cradles for domestic use. NOTE: If other items are added to the cribs/cradles, these should comply with the relevant product standards.

This European Standard specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
For cots that can be converted into other items e.g. changing units, playpens additional requirements can apply.
This European Standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This part of EN 716 specifies test methods for assessing the safety of children's cots and folding cots for domestic use.
It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.

This part of EN 716 specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
Cots that can be converted into other items e.g. changing units, playpens should, when converted, comply with the relevant European standard for that item.
This standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This part of EN 716 specifies test methods for assessing the safety of children's cots and folding cots for domestic use.
It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.

This part of EN 716 specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
Cots that can be converted into other items e.g. changing units, playpens should, when converted, comply with the relevant European standard for that item.
This standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This European Standard specifies requirements related to the safety of playpens and folding playpens for domestic use, for children of not more than 15 kg body weight. If a playpen has several functions or can be converted into another function, it must comply with those relevant standards, e.g. changing units, cots, etc.

This part of EN 12227 describes a number of tests consisting of the application, to various parts of the item, of loads of forces simulating normal functional use, as well as misuse that can reasonably be expected to occur. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.

This European standard specifies safety requirements on the structure of built-in and free-standing kitchen units, work tops and breakfast bars including those with glass in their construction. It applies to units after installation. This standard does not apply to catering equipments. However, safety, depending on the structure of the building, is not included e.g. the strength of wall hangings cabinets includes only the cabinet and its parts. The wall and the fixing in the wall is not included.

This European Standard specifies co-ordinating sizes for kitchen furniture (including worktops), kitchen appliances, sinks and decorative panels for kitchen appliances. For convenience in this document the terms "furniture" and "appliance" are used for "kitchen furniture" and "kitchen appliance". This standard defines sizes for the height, the width, the depth and the space to enable furniture, appliances, sinks and decorative panels to fit together as elements of kitchen equipment. This standard does not apply to catering equipment.