ISO/TC 67 - ISO/TC 67
Standardization of the materials, equipment and offshore structures used in the drilling, production, refining and transport by pipelines of petroleum and natural gas. Excluded : - aspects of offshore structures subject to IMO requirements ( ISO/ TC 8).
ISO/TC 67
Standardization of the materials, equipment and offshore structures used in the drilling, production, refining and transport by pipelines of petroleum and natural gas. Excluded : - aspects of offshore structures subject to IMO requirements ( ISO/ TC 8).
General Information
ISO 28300:2008 covers the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed as atmospheric storage tanks or low-pressure storage tanks. Discussed in ISO 28300:2008 are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices.
ISO 28300:2008 is intended for tanks containing petroleum and petroleum products but it can also be applied to tanks containing other liquids; however, it is necessary to use sound engineering analysis and judgment whenever ISO 28300:2008 is applied to other liquids.
ISO 28300:2008 does not apply to external floating-roof tanks.
- Standard84 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 13503-4:2006 provides for consistent methodology to measure fluid loss of stimulation and gravelpack fluid under static conditions. However, the procedure in ISO 13503-4:2006 excludes fluids that react with porous media.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or gravel packing proppants. The "proppants" mentioned henceforth in this part of ISO 13503-5:2006 refer to sand, ceramic media, resin-coated proppants, gravel packing media, and other materials used for hydraulic fracturing and gravel-packing operations.
ISO 13503-5:2006 is not applicable for use in obtaining absolute values of proppant pack conductivities under downhole reservoir conditions.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 23251:2006 is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations. ISO 23251:2006 is intended to supplement the practices set forth in ISO 4126 or API RP 520-1 for establishing a basis of design.
ISO 23251:2006 specifies requirements and gives guidelines for examining the principal causes of overpressure; and determining individual relieving rates; and selecting and designing disposal systems, including such component parts as piping, vessels, flares, and vent stacks.
ISO 23251:2006 does not apply to direct-fired steam boilers.
- Standard200 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
It applies to pipeline systems on land and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered by this International Standard is illustrated in Figure 1.
This International Standard applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics.
This International Standard is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it apply retroactively to existing pipeline systems.
It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment.
On-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances are excluded from the scope of this standard.
- Standard92 pagesEnglish languagesale 10% offe-Library read for1 day