CEN/TC 166/SC 2 - Chimneys and their components with inner linings of metal

This European Standard describes test methods for metal chimney products.

This document specifies the performance requirements for rigid or flexible metal flue liners, rigid metal
connecting flue pipes and their fittings used to convey the products of combustion from appliances to the
outside atmosphere (including their supports).
Vitreous enamelled connecting flue pipes are also covered by this document.
Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners
of custom built chimneys.
Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing
chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or
extended along their length are excluded from the scope of this document.
This document also specifies the requirements for marking, manufacturer's instructions, product information
and evaluation of conformity.
Single wall and multi-wall system chimney products are covered by EN 1856-1.

This European Standard specifies the performance requirements for single- and multi-wall system chimney products with rigid metallic liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here are included in EN 1856-2:2009. This European Standard does not apply to structurally independent (free standing or self-supporting) chimneys.

This European Standard specifies requirements and test methods for metal flue ducts material independent air supply ducts for room sealed appliances.
It also specifies the requirements for marking, manufacturer's instruction, product information and evaluation of conformity.
NOTE 1   Recommendations for preferred dimensions of products are given in the informative Annex A.
NOTE 2   In this European Standard, only general requirements are specified for elastomeric and plastic components. Elastomeric and plastic products used in flue systems are covered by separate standards, i.e. EN 14241-1 and EN 14471.
nformity.

This standard specifies the requirements and test methods for positive pressure air/flue terminals with metal flue ducts for C62- and C63-type gas appliances, which convey air for combustion, and the products of combustion from appliances to the outside atmosphere.
It also specifies the requirements for marking, manufacturer’s instructions, product information and evaluation of conformity.
NOTE   The classification of gas appliances is according to CEN/TR 1749.

This European Standard specifies the performance requirements for single and multi-wall system chimney products with rigid metallic
liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used
to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking,
manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered
here are included in EN 1856-2:2009. This European Standard does not apply to structurally independent (free standing or self-supporting) chimneys.

This document specifies the characteristics of performance for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports).
This document specifies sootfire resistant flue liners, connecting flue pipes and fittings for combustion appliances burning solid, liquid and gaseous fuels and non-sootfire resistant flue liners, connecting flue pipes and fittings for combustion appliances burning liquid and gaseous fuels only.
NOTE      This means that flue liners, connecting flue pipes and fittings designated "O" are not suitable for combustion appliances burning solid fuel.
Vitreous enamelled connecting flue pipes are also covered by this document.
Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys.
Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this document.
This document also specifies the characteristics for marking, manufacturer's instructions, product information and evaluation of conformity.
Single wall and multi-wall system chimney products (chimney sections, chimney fittings and terminals, including supports) are covered by prEN 1856-1:2019, even if used as liners for existing chimneys or connecting flue pipes.

This European Standard describes test methods for metal chimney products.

This European Standard specifies the performance requirements for single and multi-wall system chimney products with rigid metallic
liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used
to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking,
manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered
here are included in EN 1856-2:2009. This European Standard does not apply to structurally independent (free standing or self-supporting) chimneys.

This document specifies the characteristics of performance for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports).
This document specifies sootfire resistant flue liners, connecting flue pipes and fittings for combustion appliances burning solid, liquid and gaseous fuels and non-sootfire resistant flue liners, connecting flue pipes and fittings for combustion appliances burning liquid and gaseous fuels only.
NOTE      This means that flue liners, connecting flue pipes and fittings designated "O" are not suitable for combustion appliances burning solid fuel.
Vitreous enamelled connecting flue pipes are also covered by this document.
Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys.
Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this document.
This document also specifies the characteristics for marking, manufacturer's instructions, product information and evaluation of conformity.
Single wall and multi-wall system chimney products (chimney sections, chimney fittings and terminals, including supports) are covered by prEN 1856-1:2019, even if used as liners for existing chimneys or connecting flue pipes.

To establish corrosion resistance requirements for metallic chimney liners to be verified by a corrosion test defined by this standard and to monitor experimental verifications of such test and to calibrate the requirements values on the basis of actual test results achieved by samples of product known to have demonstated adequate corrosion resistance in practice.

This European Standard describes test methods for metal chimney products.

Amendment to test procedure in A.3.4.2

This European Standard specifies the performance requirements for rigid or flexible metal liners, rigid connecting flue pipes and rigid fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports).
Vitreous enamelled connecting flue pipes are also covered by this standard.
Rigid liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys.
Flexible metal liners described in this European Standard are exclusively for renovation or adaptation of existing chimneys.
This European Standard also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity.
Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this standard.
Single wall and multi-wall system chimney products are covered by EN 1856-1.

This standard specifies the performance requirements for single and multi-wall metal chimney products with metallic liners used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here, are included in prEN 1856-2:1996. This standard does not apply to structurally independent (free standing or self-supporting) chimneys.

This European Standard specifies test methods for metal chimney products.

This European Standard describes the method of specifying the design criteria and the installation method for building custom built chimneys with rigid metal liners, for relining a chimney with rigid or flexible metal liners and for system chimneys with rigid metallic liners used to convey the products of combustion from heating appliances to the outside atmosphere. It also gives information on commissioning, cleaning and maintenance of an installed chimney.