CEN/TC 168/WG 4 - Hooks and other accessories

2014-04-02 GVN: Draft for // ENQ received at ISO/CS (see ISO notification in dataservice on 2014-04-01).

ISO 3266:2010 specifies the general characteristics, performance and critical dimensions necessary for interchangeability and compatibility with other components, of forged steel eyebolts grade 4 for general lifting purposes. These eyebolts can be used for axial and inclined loading.
ISO 3266:2010 specifies the dimensions of the eyes of eyebolts permitting direct connection with shackles of the same working load limit as those defined in ISO 2415. These dimensions also allow designs with a larger eye which can permit direct connection with sling hooks of similar working load limit.
ISO 3266:2010 covers all significant hazards, hazardous situations and events relevant to eyebolts grade 4.
ISO 3266:2010 is applicable to eyebolts grade 4 for use in the temperature range of -20 ºC to 200 ºC.
ISO 3266:2010 is not applicable to eyebolts which are not forged in one piece.
ISO 3266:2010 is not applicable to forged steel eyebolts grade 4 manufactured before the date of its publication as an International Standard.

This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general lifting purposes in a range of working load limits 0,5 t to 25 t maximum.
This standard applies only to those shackles with threaded pins.
Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex C gives an example of a designation system for forged steel shackles.
The hazards covered are identified in clause 4.

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2 t working load limit (WLL), mainly for use in:
-   chain slings according to EN 818-4
-   steel wire rope slings according to prEN 13414-1
-   textile slings according to EN 1492-1, EN 1492-2
intended for lifting objects, materials or goods.
The hazards covered by this part of EN 1677 are identified in clause 4.
Annex A gives the bases for calculation of hook dimensions.
Annex B gives an example of a designation systems for hooks of Grade 8.

Dieser Teil von EN 1677 legt Anforderungen für geschweißte Aufhänge-, Zwischen- und Endglieder und Aufhänge¬garnituren aus Stahl in Güteklasse 4 im Bereich bis 67 t Tragfähigkeit fest, die hauptsächlich Verwendung finden in:
   Anschlagketten nach EN 818 5,
   Anschlagseilen aus Stahldrahtseilen nach EN 13414 1 und
   textilen Anschlagmitteln nach EN 1492 1 und EN 1492 2,
die zum Heben von Gegenständen, Materialien und Gütern vorgesehen sind.
Die Gefährdungen, die durch diesen Teil von EN 1677 abgedeckt werden, sind in Abschnitt 4 aufgeführt.

This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in:
-   chain slings according to EN 818-5
-   steel wire rope slings according to prEN 13414-1:1998
-   textile slings according to EN 1492-1, EN 1492-2.
intended for lifting objects, materials or goods.
This Part of EN 1677 does not apply to hand forged hooks.
The hazards covered by this Part of EN 1677 are identified in clause 4.
Annex A gives the bases for calculation of hook dimensions.
Annex B gives an example of a designation system for hooks of grade 4.

This Part of EN 1677 specifies general requirements for forged steel components of grade 8 up to 63 t WLL, mainly for use in:
-   chain slings according to EN 818-4;
-   steel wire rope slings according to prEN 13414-1:1999;
-   textile slings according to EN 1492-1:2000, EN 1492-2:2000
intended for lifting objects, materials or goods.
This standard does not apply to hand forged components and welded links, nor to other welded components.
The hazards covered by this Part of EN 1677 are identified in clause 4.
Annex A is informative, and gives the bases for calculation of tabulated values of mechanical properties.
Annex B is informative, and gives an example of a designation system for forged steel lifting components of grade 8.
Annex ZA gives the relationship with EU-Directives.

This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in:
-   chain slings according to EN 818-4
-   steel wire rope slings
-   textile slings according to EN 1492-1:2000, EN 1492-2:2000.
intended for lifting objects, materials or goods.
This Part of EN 1677 does not apply to hand forged links.
The hazards covered by this Part of EN 1677 are identified in clause 4.
Annex ZA gives the relationship with EU-Directives.

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in:
-   chain slings according to EN 818-4
-   steel wire rope slings according to prEN 13414-1:1999
-   textile slings according to prEN 1492-1:2000, prEN 1492-2:2000
intended for lifting objects, materials or goods.
This Part of EN 1677 does not apply to hand forged hooks.
The hazards covered by this Part of EN 1677 are identified in clause 4.
Annex A is informative, and gives the bases for calculation of hook dimensions.
Annex B is informative, and gives an example of a designation system for hooks of grade 8.
Annexes ZA and ZB give the relationship with EU-Directives.

This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general lifting purposes in a range of working load limits 0,5 t to 25 t maximum.
This standard applies only to those shackles with threaded pins.
Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex C gives an example of a designation system for forged steel shackles.
The hazards covered are identified in clause 4.

This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in: chain slings according to EN 818-5; steel wire rope slings; textile slings according to prEN 1492-1, prEN 1492-2; intended for lifting objects, materials or goods. This part of EN 1677 does not apply to hand forged hooks. The hazards covered by this part of EN 1677 are identified in clause 4.

This part of EN 1677 specifies requirements for welded steel master-links, intermediate master-links, master-links assemblies and lower terminal links of grade 4 up to 67 t WLL, mainly for use in: chain slings according to EN 818-5; steel wire rope slings; textile slings according to prEN 1492-1, prEN 1492-2; intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged links. The hazards covered by this Part of EN 1677 are identified in clause 4.

This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in:- chain slings according to EN 818-4 - steel wire rope slings - textile slings according to prEN 1492-1:1994, prEN 1492-2:1994 . intended for lifting objects, materials or goods.This Part of EN 1677 does not apply to hand forged links.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex ZA gives the relationship with EU-Directives

This Part of EN 1677 specifies general requirements for forged steel components of grade 8 up to 63 t WLL, mainly for use in: - chain slings according to EN 818-4; - steel wire rope slings according to prEN 13414-1:1999; - textile slings according to EN 1492-1:2000, EN 1492-2:2000 intended for lifting objects, materials or goods. This standard does not apply to hand forged components and welded links, nor to other welded components. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A is informative, and gives the bases for calculation of tabulated values of mechanical properties. Annex B is informative, and gives an example of a designation system for forged steel lifting components of grade 8. Annex ZA gives the relationship with EU-Directives

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2 t working load limit (WLL), mainly for use in:
- chain slings according to EN 818-4
- steel wire rope slings according to prEN 13414-1
- textile slings according to EN 1492-1, EN 1492-2 .
intended for lifting objects, materials or goods.
The hazards covered by this part of EN 1677 are identified in clause 4.
Annex A gives the bases for calculation of hook dimensions.
Annex B gives an example of a designation systems for hooks of Grade 8.

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in: - chain slings according to EN 818-4 - steel wire rope slings according to prEN 13414-1:1999 - textile slings according to prEN 1492-1:2000, prEN 1492-2:2000 intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A is informative, and gives the bases for calculation of hook dimensions. Annex B is informative, and gives an example of a designation system for hooks of grade 8. Annex ZA gives the relationship with EU-Directives