SIST ISO/R 1051:1996
(Main)Rivet shank diameters (diameter range 1 to 36 mm)
Rivet shank diameters (diameter range 1 to 36 mm)
Diamètres de tiges de rivets (diamètres de 1 à 36 mm inclus)
Premeri stebel kovic (območje premerov OD 1 do 36 mm)
General Information
Buy Standard
Standards Content (Sample)
UDC 621.884 Ref. No. : ISO/R 10514969 (E)
IS0
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
IS0 RECOMMENDATION
R 1051
RIVET SHANK DIAMETERS
(DIAMETER RANGE 1 TO 36 mm)
1st EDITION
April 1969
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Also issued in French and Russian. Copies to be obtained through the national standards organizations.
---------------------- Page: 1 ----------------------
BRIEF HISTORY
The IS0 Recommendation R 105 1, Rivet shank diameters (Diameter range 1 to 36 mm), was drawn up by
Technical Committee ISO/TC 7, Rivets, the Secretariat of which is held by the Nederlands Normalisatie-Instituut (NNI).
Work on this question led to the adoption of a Draft IS0 Recommendation.
In June 1968, this Draft IS0 Recommendation (No. 1589) was circulated to all the IS
...
CDU 621.884 Rif. No : ISO/R 1051-1969 (F)
IS0
U
RECOMMANDATION IS0
R 1051
DIAMÈTRES DE TIGES DE RIVETS
(DIAMÈTRES DE 1 À 36 mm INCLUS)
ibre EDITION
Avril 1969
REPRODUCTION INTERDITE
Le droit de reproduction des Recomrpandations IS0 et des Normes
IS0 est la propriété des Comités Membres de I’ISO. En consé-
quence, dans chaque pays, la reproduction de ces documents ne
peut être autorisée que par l’organisation nationale de normali-
sation de ce pays, membre de I’ISO.
Seules les normes nationales sont valables dans leurs pays respectifs.
Imprimé en Suisse
Ce document est également édité en anglais et en russe. I1 peut ètre obtenu auprès des organisations
nationales de normalisation.
---------------------- Page: 1 ----------------------
HISTORIQUE
La Recommandation ISO/R 1 O5 1, Diamètres de tiges de rivets (Diamètres de 1 a 36 mm inclus), a été élaborée
par le Comité Technique lSO/TC 7, Rivets, dont le Secrétariat est assuré par le Nederlands Normalisatie-Institut (”1).
Les travaux relatifs à cette question aboutirent à l’adoption d‘un Projet de Recommandation ISO.
En juin 1968, ce Projet de Recommandation IS0 (NO 1589) fut soumis à l’enquête de tous les Comités Membres
de I’ISO. I1 fut approuvé,
...
SLOVENSKI STANDARD
SIST ISO/R 1051:1996
01-april-1996
3UHPHULVWHEHONRYLF REPRþMHSUHPHURY2'GRPP
Rivet shank diameters (diameter range 1 to 36 mm)
Diamètres de tiges de rivets (diamètres de 1 à 36 mm inclus)
Ta slovenski standard je istoveten z: ISO/R 1051:1969
ICS:
21.060.40 Kovice Rivets
SIST ISO/R 1051:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO/R 1051:1996
---------------------- Page: 2 ----------------------
SIST ISO/R 1051:1996
UDC 621.884 Ref. No. : ISO/R 10514969 (E)
IS0
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
IS0 RECOMMENDATION
R 1051
RIVET SHANK DIAMETERS
(DIAMETER RANGE 1 TO 36 mm)
1st EDITION
April 1969
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Also issued in French and Russian. Copies to be obtained through the national standards organizations.
---------------------- Page: 3 ----------------------
SIST ISO/R 1051:1996
BRIEF HISTORY
The IS0 Recommendation R 105 1, Ri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.