SIST EN 302 500-2 V2.1.1:2010
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or part of the frequency range from 6 GHz to 9 GHz. The present document applies for indoor as well as portable or mobile outdoor applications. It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is fitted with an integral or dedicated antenna. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
- Status
- Published
- Public Enquiry End Date
- 30-Apr-2010
- Publication Date
- 08-Nov-2010
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 18-Oct-2010
- Due Date
- 23-Dec-2010
- Completion Date
- 09-Nov-2010
- Mandate
- M/407
Buy Documents
ETSI EN 302 500-2 V2.1.1 (2010-01) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V2.1.1 (2010-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V2.1.1 (2010-10) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 500-2 V2.1.1:2010 is the Slovenian adoption of ETSI EN 302 500-2 V2.1.1, a Harmonized European Standard for Short Range Devices (SRD) using Ultra WideBand (UWB) technology. It specifies the radio spectrum and electromagnetic compatibility requirements for UWB Location Tracking equipment operating from 6 GHz to 9 GHz, so manufacturers, test labs, and compliance teams know what to verify for indoor and portable or mobile outdoor tags. The standard supports article 3.2 of the R&TTE Directive, which focuses on effective use of spectrum and avoidance of harmful interference.
What does SIST EN 302 500-2 V2.1.1:2010 specify?
SIST EN 302 500-2 V2.1.1:2010 specifies requirements for UWB Location Tracking equipment operating in all or part of the 6 GHz to 9 GHz range. It applies to tags attached to people or objects and tracked by a fixed receiver infrastructure that only receives the tag emission, and to equipment with an integral or dedicated antenna.
The document is organized into five clauses and three annexes:
- Clause 1 - Scope
- Clause 2 - References
- Clause 3 - Definitions, symbols and abbreviations
- Clause 4 - Technical requirements specifications
- Clause 5 - Testing for compliance with technical requirements
| Annex | What it covers |
|---|---|
| Annex A | Normative HS Requirements and conformance Test specifications Table (HS-RTT) |
| Annex B | Informative title in the official languages |
| Annex C | Informative bibliography |
What are the key requirements of SIST EN 302 500-2 V2.1.1:2010?
SIST EN 302 500-2 V2.1.1:2010 ties each radio requirement to a matching test, and for some items it points back to ETSI EN 302 500-1. In practice, that means you measure the transmitter and receiver performance against the named limits and test suites, then use the same reference document for the detailed methods and result interpretation.
Environmental profile and test conditions
Clause 4.1 requires the provider to declare the operational environmental profile, and the equipment shall meet the technical requirements within that profile. Clause 5.1 then requires testing at representative points within the declared limits, and with enough environmental variation when performance changes with conditions. This matters because compliance must hold for the actual operating environment, not just a single lab setup.
Transmitter requirements
Clause 4.2.1.1 limits the maximum mean equivalent isotropically radiated power (e.i.r.p.) spectral density, and clause 4.2.1.2 limits the frequency where the highest maximum mean e.i.r.p. spectral density occurs. Clause 4.2.1.3 limits maximum peak e.i.r.p. All transmitters have to meet these rules, so the lab checks both average and peak radiated levels and where the strongest emission occurs.
Indirect Detect-And-Avoid (DAA)
Clause 4.2.1.4 adds Indirect Detect-And-Avoid (DAA) requirements for transmitters operating from 8.5 GHz to 9 GHz. The equipment has to meet the design requirements for DAA, and its mean and peak e.i.r.p. in Non-Interference Mode and non-NIM operation mode must stay within the stated limits. This is the part that matters for spectrum sharing and interference control in the upper part of the band.
Receiver requirements
Clause 4.2.2.1 limits receiver spurious radiations using the receiver spurious radiation definitions and limits from EN 302 500-1. In practice, this keeps unwanted receiver emissions under control and avoids creating interference from the receive side of the product.
Compliance testing and result interpretation
Clause 5 lists the matching test suites: mean e.i.r.p. spectral density, frequency of highest mean e.i.r.p. spectral density, peak e.i.r.p., Indirect DAA, and receiver spurious radiations. Clause 5.3 says measurement results are interpreted according to EN 302 500-1 clause 7. Annex A then maps each requirement to its test specification and marks whether it is unconditional or conditional, and whether the test is part of the Essential Radio Test Suite.
What terms does SIST EN 302 500-2 V2.1.1:2010 define?
- Ultra WideBand (UWB) - The radio technology used by the location tracking equipment covered by this standard.
- Short Range Devices (SRD) - The equipment category for short-range radio devices addressed by the document.
- equivalent isotropically radiated power (e.i.r.p.) - A way to express radiated power as if the antenna radiated equally in all directions.
- Detect-And-Avoid (DAA) - A design approach used to reduce interference by detecting spectrum use and avoiding conflicts.
- HS-RTT - The HS Requirements and conformance Test specifications Table in Annex A that links requirements to tests.
- R&TTE Directive - The EU radio equipment directive that provides the essential requirements this standard supports.
Who uses SIST EN 302 500-2 V2.1.1:2010?
Manufacturers of UWB location tracking tags use this standard to design products with compliant transmitter and receiver behavior. Test laboratories use it to set up conformance measurements for e.i.r.p., DAA, and spurious radiations. Regulatory and compliance teams use it to prepare the technical file and support a presumption of conformity under article 3.2 of the R&TTE Directive. It is also relevant to buyers and system integrators who need equipment for indoor, portable, or mobile outdoor tracking applications.
Which standards are used with SIST EN 302 500-2 V2.1.1:2010?
The main companion standard is ETSI EN 302 500-1 (V2.1.1), titled Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 1: Technical characteristics and methods of measurement. Part 2 relies on Part 1 for the detailed limits, definitions, symbols, abbreviations, and test clauses it references.
The document also cites Directive 98/34/EC and Directive 1999/5/EC (R&TTE Directive) as informative references that frame the standard’s regulatory context.
What does the SIST EN 302 500-2 V2.1.1:2010 document contain?
The document contains the technical requirements in Clause 4 and the compliance testing rules in Clause 5. It also includes the HS-RTT table in Annex A, which links each requirement to the matching test specification and notes whether the item is unconditional or conditional. Annex B provides the EN title in the official languages, and Annex C lists the bibliography. For implementation work, the standard mostly points to EN 302 500-1 for the detailed methods and limit values rather than repeating them here.
Buy Documents
ETSI EN 302 500-2 V2.1.1 (2010-01) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V2.1.1 (2010-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V2.1.1 (2010-10) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 302 500-2 V2.1.1:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or part of the frequency range from 6 GHz to 9 GHz. The present document applies for indoor as well as portable or mobile outdoor applications. It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is fitted with an integral or dedicated antenna. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or part of the frequency range from 6 GHz to 9 GHz. The present document applies for indoor as well as portable or mobile outdoor applications. It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is fitted with an integral or dedicated antenna. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
SIST EN 302 500-2 V2.1.1:2010 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 500-2 V2.1.1:2010 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/407. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 500-2 V2.1.1:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Draft ETSI EN 302 500-2 V2.1.1 (2010-01)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 9 GHz;
Part 2: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
2 Draft ETSI EN 302 500-2 V2.1.1 (2010-01)
Reference
REN/ERM-TGUWB-009-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 302 500-2 V2.1.1 (2010-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 6
4.1 Environmental profile . 6
4.2 Conformance requirements . 6
4.2.1 Transmitter requirements . 6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density. 6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 6
4.2.1.3 Maximum peak equivalent isotropically radiated power . 7
4.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
4.2.2 Receiver requirements . 7
4.2.2.1 Maximum receiver spurious radiations . 7
5 Testing for compliance with technical requirements . 7
5.1 Environmental conditions for testing . 7
5.2 Essential radio test suites . 7
5.2.1 Transmitter test suites . 7
5.2.1.1 Maximum mean e.i.r.p. spectral density . 7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 7
5.2.1.3 Maximum peak e.i.r.p. . 8
5.2.1.4 Indirect Detect-And-Avoid (DAA) . 8
5.2.2 Receiver test suites. 8
5.2.2.1 Receiver spurious radiations . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 Draft ETSI EN 302 500-2 V2.1.1 (2010-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Public Enquiry phase
of the ETSI standards Two-step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 9 GHz, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
5 Draft ETSI EN 302 500-2 V2.1.1 (2010-01)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 9 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive,
which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-sp
...
Final draft ETSI EN 302 500-2 V2.1.1 (2010-08)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 9 GHz;
Part 2: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 500-2 V2.1.1 (2010-08)
Reference
REN/ERM-TGUWB-009-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 500-2 V2.1.1 (2010-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 6
4.1 Environmental profile . 6
4.2 Conformance requirements . 6
4.2.1 Transmitter requirements . 6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density. 6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 6
4.2.1.3 Maximum peak equivalent isotropically radiated power . 6
4.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
4.2.2 Receiver requirements . 7
4.2.2.1 Maximum receiver spurious radiations . 7
5 Testing for compliance with technical requirements . 7
5.1 Environmental conditions for testing . 7
5.2 Essential radio test suites . 7
5.2.1 Transmitter test suites . 7
5.2.1.1 Maximum mean e.i.r.p. spectral density . 7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 7
5.2.1.3 Maximum peak e.i.r.p. . 7
5.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
5.2.2 Receiver test suites. 8
5.2.2.1 Receiver spurious radiations . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 Final draft ETSI EN 302 500-2 V2.1.1 (2010-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 9 GHz, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
5 Final draft ETSI EN 302 500-2 V2.1.1 (2010-08)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 9 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive,
which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of su
...
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 9 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 500-2 V2.1.1 (2010-10)
Reference
REN/ERM-TGUWB-009-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 500-2 V2.1.1 (2010-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 6
4.1 Environmental profile . 6
4.2 Conformance requirements . 6
4.2.1 Transmitter requirements . 6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density. 6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 6
4.2.1.3 Maximum peak equivalent isotropically radiated power . 6
4.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
4.2.2 Receiver requirements . 7
4.2.2.1 Maximum receiver spurious radiations . 7
5 Testing for compliance with technical requirements . 7
5.1 Environmental conditions for testing . 7
5.2 Essential radio test suites . 7
5.2.1 Transmitter test suites . 7
5.2.1.1 Maximum mean e.i.r.p. spectral density . 7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 7
5.2.1.3 Maximum peak e.i.r.p. . 7
5.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
5.2.2 Receiver test suites. 8
5.2.2.1 Receiver spurious radiations . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 ETSI EN 302 500-2 V2.1.1 (2010-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 9 GHz, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
National transposition dates
Date of adoption of this EN: 5 October 2010
Date of latest announcement of this EN (doa): 31 January 2011
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 July 2011
Date of withdrawal of any conflicting National Standard (dow): 31 July 2012
ETSI
5 ETSI EN 302 500-2 V2.1.1 (2010-10)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 9 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] R&TTE Directive,
which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http:
...
SLOVENSKI STANDARD
01-december-2010
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
1DSUDYHNUDWNHJDGRVHJD 65' NLXSRUDEOMDMRXOWUDãLURNRSDVRYQR 8:%
WHKQRORJLMR2SUHPD]DVOHGHQMHNLGHOXMHYIUHNYHQþQHPREPRþMXRG*+]GR
*+]GHO +DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH
5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices
(SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating
in the frequency range from 6 GHz to 9 GHz - Part 2: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 500-2 Version 2.1.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 9 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 500-2 V2.1.1 (2010-10)
Reference
REN/ERM-TGUWB-009-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 500-2 V2.1.1 (2010-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 6
4.1 Environmental profile . 6
4.2 Conformance requirements . 6
4.2.1 Transmitter requirements . 6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density. 6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 6
4.2.1.3 Maximum peak equivalent isotropically radiated power . 6
4.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
4.2.2 Receiver requirements . 7
4.2.2.1 Maximum receiver spurious radiations . 7
5 Testing for compliance with technical requirements . 7
5.1 Environmental conditions for testing . 7
5.2 Essential radio test suites . 7
5.2.1 Transmitter test suites . 7
5.2.1.1 Maximum mean e.i.r.p. spectral density . 7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density . 7
5.2.1.3 Maximum peak e.i.r.p. . 7
5.2.1.4 Indirect Detect-And-Avoid (DAA) . 7
5.2.2 Receiver test suites. 8
5.2.2.1 Receiver spurious radiations . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 ETSI EN 302 500-2 V2.1.1 (2010-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 9 GHz, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
National transposition dates
Date of adoption of this EN: 5 October 2010
Date of latest announcement of this EN (doa): 31 January 2011
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 July 2011
Date of withdrawal of any conflicting National Standard (dow): 31 July 2012
ETSI
5 ETSI EN 302 500-2 V2.1.1 (2010-10)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 9 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of article 3.2 of Di
...