SIST EN ISO 2812-5:2018

SLOVENSKI STANDARD
01-december-2018
1DGRPHãþD
SIST EN ISO 2812-5:2007
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGDVSHþMRV
WHPSHUDWXUQLPJUDGLHQWRP,62
Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-
gradient oven method (ISO 2812-5:2018)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 5:
Verfahren mit dem Gradientenofen (ISO 2812-5:2018)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 5: Méthode au
four à gradient de température (ISO 2812-5:2018)
Ta slovenski standard je istoveten z: EN ISO 2812-5:2018
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 2812-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2812-5:2007
English Version
Paints and varnishes - Determination of resistance to
liquids - Part 5: Temperature-gradient oven method (ISO
2812-5:2018)
Peintures et vernis - Détermination de la résistance Beschichtungsstoffe - Bestimmung der Beständigkeit
aux liquides - Partie 5: Méthode au four à gradient de gegen Flüssigkeiten - Teil 5: Verfahren mit dem
température (ISO 2812-5:2018) Gradientenofen (ISO 2812-5:2018)
This European Standard was approved by CEN on 12 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-5:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 2812-5:2018) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2812-5:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 2812-5:2018 has been approved by CEN as EN ISO 2812-5:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 2812-5
Second edition
2018-08
Paints and varnishes — Determination
of resistance to liquids —
Part 5:
Temperature-gradient oven method
Peintures et vernis — Détermination de la résistance aux liquides —
Partie 5: Méthode au four à gradient de température
Reference number
ISO 2812-5:2018(E)
©
ISO 2018
ISO 2812-5:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 2812-5:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Limitations . 2
6 Apparatus . 2
7 Test substances . 2
8 Sampling . 2
9 Test panels . 2
9.1 Substrate . 2
9.2 Preparation and coating . . 3
9.3 Coating thickness . 3
10 Procedure. 3
10.1 Conditioning of the test panels . 3
10.2 Test conditions . 3
10.3 Determination . 3
11 Evaluation . 3
12 Precision . 4
12.1 Repeatability limit (r) . 4
12.2 Reproducibility limit (R) . 4
13 Test report . 4
Annex A (informative) Examples of test substances . 5
Bibliography . 7
ISO 2812-5:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO sh
...