SIST EN ISO 1307:2000

SLOVENSKI STANDARD
SIST EN ISO 1307:2000
01-december-2000
Gumene in polimerne cevi za splošne industrijske namene - Premeri in tolerance
ter tolerance dolžin (ISO 1307:1992)
Rubber and plastics hoses for general-purpose industrial applications - Bore diameters
and tolerances, and tolerances on length (ISO 1307:1992)
Gummi- und Kunststoffschläuche für gewerbliche Zwecke - Innendurchmesser und
Längentoleranzen (ISO 1307:1992)
Tuyaux en caoutchouc et en plastique a usage général dans les applications industrielles
- Diametres intérieurs et leurs tolérances, et tolérances sur la longueur (ISO 1307:1992)
Ta slovenski standard je istoveten z: EN ISO 1307:1995
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 1307:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1307:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1307:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1307:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1307:2000
INTERNATIONAL
STANDARD :
Third edition
1992-O?- 15
-P-P-
_-__-__ - __--.- ---
.-.--e-b__ --- _______________ -- ---. -.- ---. ._. _,__________- ._ _. __-“_ _- _- ---__
Rubber and plastics hoses for general-purpose
industrial applications - Bore diameters and
tolerances, and tolerances on length
Tuyaux en caoukhouc et en plasfique 5 usage gh6ral dam les
Diatn~tres int@rieurs et leurs tolhances, et
applications industrielles -
to/&-antes sur la longueru-
.
Reference number
IS0 1307: 1992(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 1307:2000
IS0 1307:1992(E)
Foreword -
IS0 (the Internationdl brganization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is _normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, gc#vern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 oi ’o of the
...