iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60601-2-35:1998

(Main)

Medical electrical equipment -- Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use

Medical electrical equipment -- Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use

Establishes requirements, which minimize hazards to patient and operator, for heating devices such as blankets, pads, mattresses and fluid-filled mattresses. Specifies tests by which compliance can be verified.

Medizinische elektrische Geräte -- Teil 2: Besondere Festlegungen für die Sicherheit von Matten, Unterlagen und Matratzen zur Erwärmung von Patienten in der medizinische Anwendung

Appareils électromédicaux -- Partie 2: Règles particulières de sécurité des couvertures, coussins et matelas chauffants destinés au réchauffage des patients en usage médical

Etablit des prescriptions, qui rendent minimaux les dangers pour les patients et les utilisateurs, pour des dispositifs de réchauffage tels que des couvertures, coussins, matelas et matelas remplis d'un fluide. Spécifie les essais permettant de vérifier la conformité.

Medical electrical equipment - Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use (IEC 60601-2-35:1996)

General Information

Status
Withdrawn
Publication Date
31-Aug-1998
Withdrawal Date
21-Dec-2009
ICS
11.140 - Hospital equipment
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Dec-2009
Due Date
14-Jan-2010
Completion Date
22-Dec-2009
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
EN 60601-2-35:1996 - Medical electrical equipment - Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use

Relations

Revised
SIST EN 80601-2-35:2010 - Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
Effective Date
06-Nov-2012
Replaced By
SIST EN 80601-2-35:2010 - Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
Effective Date
01-Feb-2010
Replaced By
SIST EN 80601-2-35:2010 - Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
Effective Date
29-Jan-2023

Buy Standard

EN 60601-2-35:1998EN 60601-2-35:1998
PreviousNext
Standard
EN 60601-2-35:1998
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60601-2-35:1998
prva izdaja
STANDARD
september 1998
Medical electrical equipment - Part 2: Particular requirements for the safety of
blankets, pads and mattresses, intended for heating in medical use (IEC 60601-2-
35:1996)
ICS 11.140
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60601-2-35:2021(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020)
EN IEC 60601-2-35:2021

EN-IEC 60601-2-35 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to pre warm a bed are included in the scope of this document. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to be applicable to a specifically defined typeof ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document,except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-46:2020(Main)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (IEC 60601-2-46:2016)
EN IEC 60601-2-46:2019

IEC 60601-2-46:2010 specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This second edition cancels and replaces the first edition published in 1998 and constitutes a technical revision. This edition of IEC 60601-2-46 was revised to align structurally with the 2005 edition of IEC 60601-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50637:2018(Main)
Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
EN 50637:2017

This Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL BEDS, hereafter referred to as MEDICAL BEDS as defined in 201.3.218, intended for CHILDREN as defined in 201.3.207, and ADULTS with atypical anatomy (ADULTS ranging outside the definition for ADULTS in 201.3.201).
This standard applies to medical beds with nonadjustable and electrical / mechanical adjustable functions.
This Standard applies to MEDICAL BEDS with an internal length of up to 180 cm suitable to a body length of 155 cm.
NOTE 1   The limitation of 180 cm is in order to minimize the foreseeable misuse, of a parent sharing the bed with the child or that the bed will be used by an ADULT.
If a manufacturer wishes to make a bed that can be used by both a child and an ADULT, e.g. length of 180 cm or more, then it will fulfil both EN 60601-2-52 and this particular standard.
This Standard does not apply to MEDICAL BEDS intended for ADULTS as defined in 201.3.201 (covered by EN 60601-2-52).
This Standard does not apply to :
-   incubators covered by EN 60601-2-19 ;
-   beds for children, covered by EN 716-1 and EN 716-2 ;
-   cribs and cradles covered by EN 1130 (all parts) ;
-   bunk beds and high beds, covered by EN 747-1 and 747-2.
If a clause or subclause is specifically intended to be applicable to a MEDICAL BED only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MEDICAL BEDS and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of MEDICAL BED or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of EN 60601-1:2006.
NOTE 2   See also 4.2 of EN 60601-1:2006.
NOTE 3   Body length is measured from crown to sole.
1.2 Object
The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements and test methods for MEDICAL BEDS as defined in 201.3.218 intended for CHILDREN as defined in 201.3.207.
(...)

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A1:2017(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 80601-2-35:2009/A1:2016)
EN 80601-2-35:2009/A1:2016
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010/A1:2015(Amendment)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds
EN 60601-2-52:2010/A1:2015

IEC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/AC:2015(Corrigendum)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/AC:2015
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A11:2012(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/A11:2011

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010/AC:2011(Main)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds
EN 60601-2-52:2010/AC:2011

EC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010(Main)
Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
EN 80601-2-35:2009

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 60601-2-46:2022(Main)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
prEN IEC 60601-2-46:2022

IEC 60601-2-46:2023 specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the operating table top to or from the base or pedestal of an operating table with detachable operating table top. This particular standard does not apply to
- dental patient chairs (see ISO 7494-1),
- examination chairs and couches,
- patient-supporting systems of diagnostic, interventional and therapeutic equipment (see IEC 60601-2-54 or IEC 60601-2-43),
- operating table heating blankets (see IEC 60601-2-35),
- patient transfer equipment,
- delivery tables and delivery beds,
- medical beds (see IEC 60601-2-52 and EN 50637), and
- field tables.
IEC 60601-2-46:2023 cancels and replaces the third edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: structural alignment with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day