SIST EN ISO 11833-2:2006

SLOVENSKI STANDARD
01-julij-2006
3ROLPHUQLPDWHULDOL1HPHKþDQHSROLYLQLONORULGHSORãþH9UVWHPHUHLQ]QDþLOQRVWL
GHO3ORãþH]GHEHOLQRPDQMNRWPP,62
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and
characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
Kunststoffe - Weichmacherfreie Polyvinylchloridtafeln - Typen, Maße und Eigenschaften
- Teil 2: Tafeln mit einer geringeren Dicke als 1 mm (ISO 11833-2:1998)
Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et
caractéristiques - Partie 2: Feuilles et films d'épaisseur inférieure a 1 mm (ISO 11833-
2:1998)
Ta slovenski standard je istoveten z: EN ISO 11833-2:2006
ICS:
83.140.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11833-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 83.140.10
English Version
Plastics - Unplasticized poly(vinyl chloride) sheets - Types,
dimensions and characteristics - Part 2: Sheets of thickness less
than 1 mm (ISO 11833-2:1998)
Plastiques - Feuilles en poly(chlorure de vinyle) non Kunststoffe - Weichmacherfreie Polyvinylchloridtafeln -
plastifié - Types, dimensions et caractéristiques - Partie 2: Typen, Maße und Eigenschaften - Teil 2: Tafeln mit einer
Feuilles et films d'épaisseur inférieure à 1 mm (ISO 11833- geringeren Dicke als 1 mm (ISO 11833-2:1998)
2:1998)
This European Standard was approved by CEN on 16 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11833-2:2006: E
worldwide for CEN national Members.

Foreword
The text of ISO 11833-2:1998 has been prepared by Technical Committee ISO/TC 61 "Plastics”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11833-2:2006 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held
by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 11833-2:1998 has been approved by CEN as EN ISO 11833-2:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 11833-2
First edition
1998-07-15
Plastics — Unplasticized poly(vinyl
chloride) sheets — Types, dimensions and
characteristics —
Part 2:
Sheets of thickness less than 1 mm
Plastiques — Feuilles en poly(chlorure de vinyle) non plastifié — Types,
dimensions et caractéristiques —
Partie 2: Feuilles et films d'épaisseur inférieure à 1 mm
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND USER
PURPOSES, DRAFT INTERNATIONAL STAND-
ARDS MAY ON OCCASION HAVE TO BE
CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
A
Reference number
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
ISO 11833-2:1998(E)
ISO 11833-2:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11833-2 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 11, Products.
ISO 11833 consists of the following parts, under the general title
Unplasticized poly(vinyl chloride) sheets — Types, dimensions and
characteristics:
— Part 1: Sheets of thickness not less than 1 mm
— Part 2: Sheets of thickness less than 1 mm
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
©
INTERNATIONAL STANDARD  ISO ISO 11833-2:1998(E)
Plastics — Unplasticized poly(vinyl chloride) sheets — Types,
dimensions and characteristics —
Part 2:
Sheets of thickness less than 1 mm
1  Scope
1.1  This part of ISO 11833 specifies requirements for sheets and films of unplasticized poly(vinyl chloride)
(PVC-U) and the test methods to be used to measure the required values.
1.2  It applies only to sheets of thickness less than 1,0 mm.
1.3  It does not cover thermoshrinkable or biaxially stretched PVC-U sheets and films.
2  Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 11833. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this p
...