SIST EN ISO 22774:2005

SLOVENSKI STANDARD
SIST EN ISO 22774:2005
01-april-2005
Obutev - Preskusne metode za dodatke: vezalke - Odpornost proti odrgnjenju (ISO
22774:2004)
Footwear - Test methods for accessories: shoe laces - Abrasion resistance (ISO
22774:2004)
Schuhe - Prüfverfahren für Zubehör: Schnürsenkel - Scheuerbeständigkeit (ISO
22774:2004)
Chaussures - Méthodes d'essai pour accessoires: lacets - Résistance a l'abrasion (ISO
22774:2004)
Ta slovenski standard je istoveten z: EN ISO 22774:2004
ICS:
61.060 Obuvala Footwear
SIST EN ISO 22774:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 22774:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 22774:2005
EUROPEAN STANDARD
EN ISO 22774
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 61.060
English version
Footwear - Test methods for accessories: shoe laces - Abrasion
resistance (ISO 22774:2004)
Chaussures - Méthodes d'essai pour accessoires: lacets et Schuhe - Prüfverfahren für Zubehör: Schnürsenkel -
oeillets - Résistance à l'abrasion (ISO 22774:2004) Scheuerbeständigkeit (ISO 22774:2004)
This European Standard was approved by CEN on 23 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22774:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 22774:2005
EN ISO 22774:2004 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.4
5 Apparatus and materials.5
5.1 General.5
6 Test specimens.7
6.1 Method 1 .7
6.2 Methods 2 and 3.7
7 Conditioning.7
8 Procedure .7
8.1 Method 1 .7
8.2 Method 2 .8
8.3 Method 3 .8
9 Calculation and expression of results.8
10 Test report .9
Annex ZA (normative) Normative references to International publications with their
corresponding European publications.10

2

---------------------- Page: 4 ----------------------

SIST EN ISO 22774:2005
EN ISO 22774:2004 (E)
Foreword
This document (EN ISO 22774:2004) has been prepared by CEN/TC 309, "Footwear", the secretariat of which
is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at
the latest by June 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 22774:2005
EN ISO 22774:2004 (E)
1 Scope
This document specifies three test methods for determining the abrasion resistance of a shoe lace to repeated
rubbing:
 Method 1: lace to lace abrasion;
 Method 2: lace to standard eyelet abrasion;
 Method 3: lace to eyelet (from footwear) abrasion.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 12222, Footwear — Standard atmospheres for conditioning and testing of footwear and components for
footwear
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
abrasion resistance of shoe laces
ability of the shoe lace to resist to repeated rubbing against either a similar shoe lace or a lace carrier
3.2
number of cycles to failure
arithmetic mean of the number of cycles to failure for the test specimens submitted to test
3.3
type of failure
expressed as failure of the shorter lace or failure of the longer lace, together with a description of the
respective amount of wear in the covering and core of each lace
4 Principle
A shoe lace is threaded through a loop formed by:
- a piece of similar lace held open by a spacer (Method 1);
- a lace carrier (Methods 2 and 3).
The shoe lace is bent through a fixed acute angle at the point of contact with the loop. It is then held under a
standard tension while it is repeatedly drawn back and forth through the loop until it fails.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 22774:2005
EN ISO 22774:2004 (E)
5 Apparatus and materials
5.1 General
5.1.1 A test machine with one or more test stations, see Figure 1, each having:
NOTE Test machines with less than six stations are also acceptable to conduct this test. In which case the test
should be repeated until six test specimens have been tested (see 8.1.6).
5.1.2 A moveable clamp which has a means of firmly holding:
- both ends of a piece of shoe lace (Method 1);
- one end of the metal strip (see 5.1.8) (Methods 2 and 3).
5.1.3 A stationary clamp which is mounted in the horizon
...