SIST EN 13034:2005+A1:2009
(Main)Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
This document specifies the minimum requirements for limited use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at the molecular level) is not required.
This document covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]).
Chemical protective suits (Type 6) cover and protect at least the trunk and the limbs, e.g. one-piece coveralls or two piece suits, with or without hood, boot-socks or boot-covers. This document specifies minimum requirements for the connections between different parts of Type 6 suits by the use of a reduced whole suit spray test using a variant of EN 468, as described in 5.2.
Partial body protection of similar limited performance (Type PB [6]) covers and protects only specific parts of the body, e.g. coats, aprons, sleeves etc. They should not be tested to the whole suit test (5.2).
Schutzkleidung gegen flüssige Chemikalien - Leistungsanforderungen an Chemikalienschutzkleidung mit eingeschränkter Schutzleistung gegen flüssige Chemikalien (Ausrüstung Typ 6 und Typ PB [6])
Dieses Dokument legt die Mindestanforderungen an Chemikalienschutzkleidung mit eingeschränkter Schutzwirkung
einschließlich wiederverwendbarer Schutzkleidung fest. Chemikalienschutzkleidung mit eingeschränkter
Schutzwirkung ist für die Verwendung in Fällen einer möglichen Exposition gegenüber leichter
Chemikalienversprühung, flüssigen Aerosolen oder mit niedrigem Druck auftreffenden Spritzern geeignet,
gegen die eine vollständige Barriere gegen Flüssigkeitspermeation (auf molekularer Ebene) nicht erforderlich
ist.
Dieses Dokument gilt für beide, die Chemikalienschutzbekleidungen (Typ 6) und den Teilkörperschutz
(Typ PB [6]).
Chemikalienschutzanzüge (Typ 6) bedecken und schützen mindestens den Rumpf und die Lenden, z. B.
einteilige Overalls und zweiteilige Anzüge mit oder ohne Haube, mit oder ohne Füßlinge oder Überschuhe.
Dieses Dokument legt auch die Mindestanforderungen für die Verbindungen zwischen den verschiedenen
Teilen von Typ-6-Anzügen durch Anwendung eines abgeschwächten Spray-Tests für den ganzen Anzug
mittels einer Variante von !EN ISO 17491-4" fest, wie in 5.2 beschrieben.
Teilweiser Körperschutz mit ähnlicher eingeschränkter Schutzwirkung (Typ PB [6]) bedeckt und schützt nur
einen Teil des Körpers, wie z. B. Kittel oder Schürzen, Ärmel usw. Sie sollten jedoch nicht mit dem Test für
den ganzen Anzug (5.2) geprüft werden.
Vêtements de protection contre les produits chimiques liquides - Exigences relatives aux vêtements de protection chimique offrant une protection limitée contre les produits chimiques liquides (équipement de type 6)
La présente Norme européenne spécifie les exigences minimales relatives aux vêtements de protection chimique
à usage limité ou réutilisables offrant une protection limitée. Les vêtements de protection chimique à usage limité sont
conçus pour être utilisés en cas d’exposition probable à de légères pulvérisations, aux aérosols liquides ou à basse
pression, de légères éclaboussures, contre lesquels une barrière totale contre la perméation des liquides (au niveau
moléculaire) n’est pas nécessaire.
La présente norme européenne couvre à la fois les combinaisons de protection chimique (Type 6) et les articles
ne couvrant qu’une partie du corps (Type PB [6]).
Les combinaisons de protection (Type 6) couvrent et protègent au moins le tronc et les membres, comme
par exemple les combinaisons une pièce ou deux-pièces, avec ou sans capuche, bottes ou sur-bottes. La présente
Norme européenne spécifie les exigences minimales pour les jonctions entre les différentes parties
des combinaisons de Type 6 par la réalisation d’un essai au brouillard réduit sur la combinaison complète utilisant
une variante de l’!EN ISO 17491-4", comme décrit en 5.2.
Les vêtements de protection couvrant partiellement le corps et offrant une performance limitée similaire (Type PB [6]),
couvrent et protègent des parties spécifiques du corps, comme par exemple vestes, tabliers, manches, etc. Ils ne
doivent pas être soumis à l'essai de la combinaison complète (5.2).
Varovalna obleka pred učinki tekočih kemikalij - Zahteve za izdelavo oblačil za zaščito pred kemikalijami, ki nudijo omejeno zaščito pred tekočimi kemikalijami (oprema tipa 6 in tipa PB [6])
General Information
- Status
- Published
- Publication Date
- 31-May-2009
- Technical Committee
- OVP - Personal protecting equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 18-May-2009
- Due Date
- 23-Jul-2009
- Completion Date
- 01-Jun-2009
Relations
- Effective Date
- 01-Jul-2009
- Effective Date
- 01-Jul-2009
Overview
EN 13034:2005+A1:2009 is the CEN European standard that sets minimum performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals - commonly referred to as Type 6 (whole suits) and Type PB[6] (partial body protection). The standard covers single‑use and re‑usable garments intended for protection from light spray, liquid aerosols or low‑pressure, low‑volume splashes where a complete molecular permeation barrier is not required.
Key topics and technical requirements
- Scope and garment types
- Type 6: suits that cover at least the trunk and limbs (one‑piece coveralls, two‑piece suits), with or without hood, boot‑socks or boot‑covers.
- Type PB[6]: partial body items (aprons, sleeves, coats) - not subject to the whole‑suit spray test.
- Material performance (referenced tests from EN 14325)
- Abrasion, tear, tensile and puncture resistance
- Liquid repellency: minimum performance level 3 for at least one test chemical
- Resistance to liquid penetration: minimum performance level 2 for at least one test chemical
- Materials must not cause skin irritation and manufacturers’ cleaning/reuse instructions apply.
- Seams, joins and assemblages
- Seams must prevent liquid penetration and allow run‑off.
- Seam strength tested per EN ISO 13935‑2; minimum class 1 seam performance.
- Whole‑suit spray (mist) test
- Type 6 suits are tested using a reduced whole‑suit spray method (variant of EN ISO 17491‑4) after a practical “seven movements” sequence executed by a human subject to simulate realistic wear and movement.
- Three suits are tested after preconditioning/cleaning (if applicable).
- Marking and manufacturer information
- Requirements include care, cleaning limits (if none specified, five cleaning cycles are applied for testing), and instructions about combining with other PPE.
Applications and users
EN 13034 is intended for situations with a low risk of chemical exposure: protection from light sprays, mists, aerosols or accidental small splashes. Typical users and stakeholders:
- PPE manufacturers and designers validating Type 6 / PB[6] garments
- Occupational health & safety managers and procurement teams selecting appropriate chemical protective clothing
- Test laboratories performing EN 14325 / EN ISO 17491‑4 based evaluations
- Employers in laboratories, maintenance, light chemical handling and other low‑exposure environments conducting risk assessments
Related standards
- EN 14325 (test methods and classification for chemical protective materials)
- EN ISO 17491‑4 (spray/mist penetration test - variant used)
- EN ISO 13935‑2 (seam tensile testing)
- EN 340 (general protective clothing requirements)
- EN 23758 (care labelling)
- Links to EU Directive 89/686/EEC (noted in annex for legal relationship)
EN 13034 helps balance wearer comfort and adequate protection for low‑hazard tasks by defining practical, testable limits for limited‑performance chemical protective clothing.
Frequently Asked Questions
SIST EN 13034:2005+A1:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)". This standard covers: This document specifies the minimum requirements for limited use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at the molecular level) is not required. This document covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]). Chemical protective suits (Type 6) cover and protect at least the trunk and the limbs, e.g. one-piece coveralls or two piece suits, with or without hood, boot-socks or boot-covers. This document specifies minimum requirements for the connections between different parts of Type 6 suits by the use of a reduced whole suit spray test using a variant of EN 468, as described in 5.2. Partial body protection of similar limited performance (Type PB [6]) covers and protects only specific parts of the body, e.g. coats, aprons, sleeves etc. They should not be tested to the whole suit test (5.2).
This document specifies the minimum requirements for limited use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at the molecular level) is not required. This document covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]). Chemical protective suits (Type 6) cover and protect at least the trunk and the limbs, e.g. one-piece coveralls or two piece suits, with or without hood, boot-socks or boot-covers. This document specifies minimum requirements for the connections between different parts of Type 6 suits by the use of a reduced whole suit spray test using a variant of EN 468, as described in 5.2. Partial body protection of similar limited performance (Type PB [6]) covers and protects only specific parts of the body, e.g. coats, aprons, sleeves etc. They should not be tested to the whole suit test (5.2).
SIST EN 13034:2005+A1:2009 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13034:2005+A1:2009 has the following relationships with other standards: It is inter standard links to SIST EN 13034:2005/kprA1:2009, SIST EN 13034:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13034:2005+A1:2009 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13034:2005+A1:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzkleidung gegen flüssige Chemikalien - Leistungsanforderungen an Chemikalienschutzkleidung mit eingeschränkter Schutzleistung gegen flüssige Chemikalien (Ausrüstung Typ 6 und Typ PB [6])Vêtements de protection contre les produits chimiques liquides - Exigences relatives aux vêtements de protection chimique offrant une protection limitée contre les produits chimiques liquides (équipement de type 6)Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)13.340.10Varovalna oblekaProtective clothingICS:Ta slovenski standard je istoveten z:EN 13034:2005+A1:2009SIST EN 13034:2005+A1:2009en,de01-julij-2009SIST EN 13034:2005+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13034:2005+A1
May 2009 ICS 13.340.10 Supersedes EN 13034:2005English Version
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Vêtements de protection contre les produits chimiques liquides - Exigences pour les vêtements de protection chimique offrant une protection limitée contre les produits chimiques liquides équipement du Type 6 et du Type PB [6])
Schutzkleidung gegen flüssige Chemikalien - Leistungsanforderungen an Chemikalienschutzkleidung mit eingeschränkter Schutzleistung gegen flüssige Chemikalien (Ausrüstung Typ 6 und Typ PB [6]) This European Standard was approved by CEN on 14 February 2005 and includes Amendment 1 approved by CEN on 5 April 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13034:2005+A1:2009: ESIST EN 13034:2005+A1:2009
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 12 Bibliography . 13
EN 14325:2004 Performance requirement 4.4 Abrasion resistance 4.7 Tear resistance (trapezoidal test specimen) 4.9 Tensile strength 4.10 Puncture resistance 4.12 Liquid repellency 4.13 Resistance to penetration by liquids !deleted text"
If a material does not provide a clearly measurable test result for any of the requirements in Table 1, "not applicable" shall be marked in both the test report and in the manufacturer's information. The reason why the test could not be applied or completed, shall be indicated, e.g. that the elasticity of the specimen prevents to determine an end-point in the puncture resis
...
이 문서는 한정된 사용 및 재사용 가능한 한정된 성능의 화학 보호복에 대한 최소 요구 사항을 명시합니다. 한정된 성능의 화학 보호복은 가벼운 분사, 액체 에어로졸 또는 액체 스플래시에 잠재적으로 노출될 경우에 사용되며, 분자 수준에서 완전한 액체 침투 방지가 필요하지 않습니다. 이 문서는 화학 보호복(유형 6)과 부분 체부 보호(유형 PB [6]) 모두를 포함합니다. 화학 보호복(유형 6)은 몸통과 사지를 적어도 덮고 보호합니다. 예를 들어, 한 조각 작업복이나 두 조각 작업복, 후드와 부츠, 양말, 부츠 커버가 있는 경우입니다. 이 문서는 유형 6 슈트의 서로 다른 부분 간의 연결에 대한 최소 요구 사항을 지정하기 위해 EN 468의 변형을 사용한 줄어든 스프레이 테스트를 사용합니다. 유사한 한정된 성능의 부분 체부 보호(유형 PB [6])는 몸체 일부만 덮고, 보호합니다. 예를 들어, 코트, 에이프런, 소매 등이 있습니다. 해당 부분은 전체 슈트 테스트에는 시험되지 않아야 합니다.
この文書では、限定的な使用と再使用可能な限定的なパフォーマンスを持つ化学防護服に対する最低要件が定められています。限定的なパフォーマンスの化学防護服は、軽い噴霧、液体エアゾル、低圧・低容量のスプラッシュへの潜在的な露出の場合に使用されますが、分子レベルで完全な液体浸透防止が必要ではありません。 この文書は、化学防護スーツ（タイプ6）と部分的な体の保護（タイプPB [6]）の両方をカバーしています。 化学防護スーツ（タイプ6）は、少なくとも胴体と四肢を覆い保護します。例えば、ワンピースのつなぎ服や2つのパーツのスーツ、フードやブーツソックス、ブーツカバーが付いている場合などです。この文書では、タイプ6のスーツの異なる部分の接続について、EN 468の変種を使用した縮小全体スプレーテストを使用して、最低要件を規定しています。 限定的なパフォーマンスの部分的な体の保護（タイプPB [6]）は、体の特定の部分のみをカバーして保護します。例えば、コート、エプロン、袖などです。ただし、部分的な体の保護は全体スーツテストには合格している必要はありません。
This article discusses the SIST EN 13034:2005+A1:2009 standard for protective clothing against liquid chemicals. The standard outlines the requirements for limited use and re-useable limited performance chemical protective clothing. This type of clothing is designed to provide protection against light sprays, liquid aerosols, and low pressure, low volume splashes, but it does not offer a complete barrier against liquid permeation at the molecular level. The standard covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]). Chemical protective suits cover and protect the trunk and limbs, while partial body protection only covers specific parts of the body. The standard specifies minimum requirements for the connections between different parts of Type 6 suits, but partial body protection should not be tested using the whole suit test.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...