SIST EN ISO 11114-1:2020/A1:2023
(Amendment)Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe - Änderung 1 (ISO 11114-1:2020/Amd 1:2023)
No scope available
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-1:2020/Amd 1:2023)
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del: Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2020/Amd 1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11114-1:2020/A1:2023
01-november-2023
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2020/Amd 1:2023)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in
Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe - Änderung 1 (ISO 11114
-1:2020/Amd 1:2023)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-
1:2020/Amd 1:2023)
Ta slovenski standard je istoveten z: EN ISO 11114-1:2020/A1:2023
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN ISO 11114-1:2020/A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-1:2020/A1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-1:2020/A1:2023
EN ISO 11114-1:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Compatibility of cylinder and valve
materials with gas contents - Part 1: Metallic materials -
Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
Bouteilles à gaz - Compatibilité des matériaux des Gasflaschen - Verträglichkeit von Werkstoffen für
bouteilles et des robinets avec les contenus gazeux - Gasflaschen und Ventile mit den in Berührung
Partie 1: Matériaux métalliques - Amendement 1 (ISO kommenden Gasen - Teil 1: Metallische Werkstoffe -
11114-1:2020/Amd 1:2023) Änderung 1 (ISO 11114-1:2020/Amd 1:2023)
This amendment A1 modifies the European Standard EN ISO 11114-1:2020; it was approved by CEN on 21 March 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11114-1:2020/A1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-1:2020/A1:2023
EN ISO 11114-1:2020/A1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-1:2020/A1:2023
EN ISO 11114-1:2020/A1:2023 (E)
European foreword
This document (EN ISO 11114-1:2020/A1:2023) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 11114-1:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2024, and
conflicting national standards shall be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Intern
...
SLOVENSKI STANDARD
SIST EN ISO 11114-1:2020/oprA1:2023
01-januar-2023
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2020/DAM 1:2022)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials - Amendment 1 (ISO 11114-1:2020/DAM 1:2022)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in
Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe - Änderung 1 (ISO 11114-
1:2020/DAM 1:2022)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-
1:2020/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 11114-1:2020/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN ISO 11114-1:2020/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-1:2020/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-1:2020/oprA1:2023
DRAFT AMENDMENT
ISO 11114-1:2020/DAM 1
ISO/TC 58 Secretariat: BSI
Voting begins on: Voting terminates on:
2022-11-28 2023-02-20
Gas cylinders — Compatibility of cylinder and valve
materials with gas contents —
Part 1:
Metallic materials
AMENDMENT 1
Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux —
Partie 1: Matériaux métalliques
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11114-1:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-1:2020/oprA1:2023
ISO 11114-1:2020/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 11114-1:2020/DAM 1
ISO/TC 58 Secretariat: BSI
Voting begins on: Voting terminates on:
Gas cylinders — Compatibility of cylinder and valve
materials with gas contents —
Part 1:
Metallic materials
AMENDMENT 1
Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux —
Partie 1: Matériaux métalliques
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 11114-1:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-1:2020/oprA1:2023
ISO 11114-1:2020/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the rig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.