oSIST prEN ISO 16602-2:2025
(Main)Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 2: Physical test methods, classification and requirements (ISO/DIS 16602-2:2025)
Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 2: Physical test methods, classification and requirements (ISO/DIS 16602-2:2025)
This document specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same minimum chemical protective barrier performance requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that other parts of ISO 16602 may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicates the intended use of the protective clothing. It is similarly important that the user (specifier) carries out a risk assessment in order to establish the correct protective performance levels for the intended task.
Schutzkleidung gegen Chemikalien - Klassifizierung, Kennzeichnung und Leistungsfähigkeit - Teil 2: Physikalische Testmethoden, Klassifizierung und Anforderungen (ISO/DIS 16602-2:2025)
Dieses Dokument legt die Klassifizierung der physikalischen Leistung und Prüfverfahren für Materialien fest, die in Chemikalienschutzkleidung, einschließlich Handschuhen und Schuhwerk, verwendet werden. Die Handschuhe und das Schuhwerk sollten dieselben Mindestanforderungen an die Leistung der Chemikalienschutzbarriere erfüllen wie der Bekleidungsstoff, wenn sie fester Bestandteil der Kleidung sind. Das vorliegende Dokument ist eine Bezugsnorm, auf die sich Normen, welche die Leistungsfähigkeit von Chemikalienschutzkleidung behandeln, vollständig oder in Teilen beziehen können. Jedoch ist diese Norm nicht erschöpfend in dem Sinne, dass andere Teile von ISO 16602 durchaus eine Prüfung in Übereinstimmung mit Prüfverfahrensnormen erfordern können, welche in dieser Norm nicht enthalten sind.
Obwohl es das Ziel dieser Leistungsstufen ist, eine Beziehung zu der Verwendung herzustellen, bei der die Chemikalienschutzkleidung zu tragen ist, ist es wichtig, dass der Hersteller oder Lieferant der Chemikalienschutzkleidung die vorgesehene Verwendung der Schutzkleidung angibt. Zudem ist es ebenfalls wichtig, dass der Anwender (Ersteller von Spezifikationen) eine Risikobewertung durchführt, um die richtigen Schutzleistungsstufen für die vorgesehene Aufgabe festzulegen.
Habillement de protection contre les produits chimiques - Classification, étiquetage et exigences de performances - Partie 2: Méthodes d'essai physique, classification et exigences (ISO/DIS 16602-2:2025)
Varovalna obleka za zaščito pred kemikalijami - Klasifikacija, označevanje in zahtevane lastnosti - 2. del: Fizikalne preskusne metode, klasifikacija in zahteve (ISO/DIS 16602-2:2025)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Varovalna obleka za zaščito pred kemikalijami - Klasifikacija, označevanje in
zahtevane lastnosti - 2. del: Fizikalne preskusne metode, klasifikacija in zahteve
(ISO/DIS 16602-2:2025)
Protective clothing for protection against chemicals - Classification, labelling and
performance requirements - Part 2: Physical test methods, classification and
requirements (ISO/DIS 16602-2:2025)
Schutzkleidung gegen Chemikalien - Klassifizierung, Kennzeichnung und
Leistungsfähigkeit - Teil 2: Physikalische Testmethoden, Klassifizierung und
Anforderungen (ISO/DIS 16602-2:2025)
Habillement de protection contre les produits chimiques - Classification, étiquetage et
exigences de performances - Partie 2: Méthodes d'essai physique, classification et
exigences (ISO/DIS 16602-2:2025)
Ta slovenski standard je istoveten z: prEN ISO 16602-2
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 16602-2
ISO/TC 94/SC 13
Protective clothing for protection
Secretariat: SNV
against chemicals — Classification,
Voting begins on:
labelling and performance
2025-07-01
requirements —
Voting terminates on:
2025-09-23
Part 2:
Physical test methods, classification
and requirements
Habillement de protection contre les produits chimiques —
Classification, étiquetage et exigences de performances —
Partie 2: Méthodes d'essai physique, classification et exigences
ICS: 13.340.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16602-2:2025(en)
DRAFT
ISO/DIS 16602-2:2025(en)
International
Standard
ISO/DIS 16602-2
ISO/TC 94/SC 13
Protective clothing for protection
Secretariat: SNV
against chemicals — Classification,
Voting begins on:
labelling and performance
requirements —
Voting terminates on:
Part 2:
Physical test methods, classification
and requirements
Habillement de protection contre les produits chimiques —
Classification, étiquetage et exigences de performances —
Partie 2: Méthodes d'essai physique, classification et exigences
ICS: 13.340.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 16602-2:2025(en)
ii
ISO/DIS 16602-2:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Performance classification of materials . 3
4.1 Determination of property value for performance classification.3
4.2 Requirements for pre-treatment .3
4.3 Conditioning and testing temperature and humidity . .3
4.4 Abrasion resistance . . .4
4.4.1 General .4
4.4.2 Determination of abrasion resistance performance classification .4
4.5 Compression-folding (Schildknecht) flex cracking resistance .6
4.5.1 General .6
4.5.2 Determination of flex cracking resistance performance classification .6
4.6 Compression-folding (Schildknecht) flex cracking resistance at –30 °C (Optional).8
4.7 Trapezoidal tear resistance .8
4.8 Strength test (Tensile and Burst) .9
4.8.1 Tensile Strength .9
4.8.2 Bursting resistance .9
4.9 Puncture resistance .10
4.10 Resistance to ignition and flame .10
4.10.1 General .10
4.10.2 Resistance to ignition (minimum testing requirement) .10
4.10.3 Visual Assessment of ignition and flame test .11
4.10.4 Resistance to flame .11
4.10.5 Classification of ignition and flame test . 12
5 Performance requirements for seams, joins and assemblages .12
5.1 Determination of property value for rating and classification . 12
5.2 Pre-treatment . 12
5.3 Conditioning. 13
5.4 Seam strength . 13
5.5 Pull strength of joins and assemblages . 13
5.5.1 General . 13
5.5.2 Chemical protective footwear and gloves (excluding socks/footwear covers) . 13
5.5.3 Body Harness or Belts .14
5.5.4 Lifelines .14
5.5.5 Exhalation Valves/Exhaust device .14
5.6 Leak Tightness of Exhalation Valves . 15
5.7 Closure assembly strength test . 15
5.8 Impact resistance . 15
6 Test report .16
Annex A (normative) Abrasive material . . 17
Annex B (normative) Assessment, evaluation and determination of the property values for
rating and for performance classification .18
Annex C (normative) Flame test method- single burner moving test specimen .20
Annex D (normative) Specification for pressure pot and leak-tightness of equipment .23
Annex E (normative) Pass-through strength and assemblage strength test .26
Annex F (normative) Exhalation valve leakage test .27
iii
ISO/DIS 16602-2:2025(en)
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered .28
Bibliography .32
iv
ISO/DIS 16602-2:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.