SIST ISO 6282:2020
(Main)Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
ISO 6282 specifies a method of determining the σ0,01*‑limit for the steel backing of thin‑walled multilayer half bearings for bearing diameters up to 80 mm. It can also be used for bearing diameters up to 160 mm.
Paliers lisses -- Demi-coussinets minces métalliques -- Détermination de la limite élastique sigma 0,01*
Drsni ležaji - Kovinske tankostene ležajne blazinice - Določitev meje sigme 0,01*
General Information
Relations
Buy Standard
Standards Content (Sample)
Deleted: /FDIS
ISO 6282:2018(E)
ISO/TC 123/SC 2
Plain bearings — Metallic thin-walled half bearings — Determination
Formatted: Font: Bold, Subscript
of the σ *-limit
0,01
Paliers lisses — Demi-coussinets minces métalliques — Détermination de la limite élastique σ * Formatted: Subscript
0,01
---------------------- Page: 1 ----------------------
Error! Reference source not found.
Contents Page
Foreword .iii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
5 Preparation of test specimen . 2
6 Procedure. 2
7 Expression of results . 3
Annex A (informative) Evaluation sheet for the determination of the σ *-limit of metallic
0,01
thin-walled half bearings . 4
Bibliography . 6
Error! Reference source not found.
ii
---------------------- Page: 2 ----------------------
Error! Reference source not found.
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non‐governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 123, plain bearings, Subcommittee SC 2,
Materials and lubricants, their properties, characteristics, test methods and testing conditions.
This second edition cancels and replaces the first edition (ISO 6282:1983), which has been technically
revised. The main changes compared to the previous edition are as follows:
— The Scope has been revised.
— Clauses 3, 4, 5, and 6 have been revised.
— Figure 1 has been revised.
Error! Reference source not found.
iii
---------------------- Page: 3 ----------------------
Error! Reference source not found. Error! Reference source not found.
Plain bearings — Metallic thin-walled half bearings —
Formatted: Font: 17 pt, Bold,
Determination of the σ *-limit
0,01
Subscript
1 Scope
This document specifies a method of determining the σ *‐limit for the steel backing of thin‐walled
0,01
multilayer half bearings for bearing diameters up to 80 mm. It can also be used for bearing diameters
up to 160 mm.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
σ *-limit
0,01
compressive hoop stress in a half bearing which creates a permanent set of 0,01 %
Note 1 to entry The σ *‐limit is different from the usual σ ‐limit as a result of the geometry of the test
0,01 0,01 Formatted: Font: 10 pt, Subscript
specimen and the method of application of the test load. In order to make the distinction, the σ ‐limit of half
0,01
bearings is marked with an asterisk (*).
3.2
compressive hoop stress of a half bearing
F/S
quotient of the normal load, F, applied to an area of cross‐section, S, which is determined
mathematically
Note 1 to entry F is expressed in newtons (N), S is in square millimetres (mm²) and F/S is in megapascals
(MPa), which equals newtons per square millimetre.
Note 2 to entry The area of cross‐section, S, is calculat
...
INTERNATIONAL ISO
STANDARD 6282
Second edition
2018-06
Plain bearings — Metallic thin-walled
half bearings — Determination of the
σ *-limit
0,01
Paliers lisses — Demi-coussinets minces métalliques — Détermination
de la limite élastique σ *
0,01
Reference number
ISO 6282:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 6282:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 6282:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
5 Preparation of test specimen . 2
6 Procedure. 2
7 Expression of results . 3
Annex A (informative) Evaluation sheet for the determination of the σ *-limit of metallic
0,01
thin-walled half bearings . 4
Bibliography . 5
© ISO 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 6282:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 123, plain bearings, Subcommittee SC 2,
Materials and lubricants, their properties, characteristics, test methods and testing conditions.
This second edition cancels and replaces the first edition (ISO 6282:1983), which has been technically
revised. The main changes compared to the previous edition are as follows:
— The Scope has been revised.
— Clauses 3, 4, 5, and 6 have been revised.
— Figure 1 has been revised.
iv © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 6282:2018(E)
Plain bearings — Metallic thin-walled half bearings —
Determination of the σ *-limit
0,01
1 Scope
This document specifies a method of determining the σ *-limit for the steel backing of thin-walled
0,01
multilayer half bearings for bearing diameters up to 80 mm. It can also be used for bearing diameters
up to 160 mm.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
3.1
σ *-limit
0,01
compressive hoop stress in a half bearing which creates a permanent set of 0,01 %
Note 1 to entry: Th
...
SLOVENSKI STANDARD
SIST ISO 6282:2020
01-maj-2020
Drsni ležaji - Kovinske tankostene ležajne blazinice - Določitev meje sigme 0,01*
Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
Paliers lisses -- Demi-coussinets minces métalliques -- Détermination de la limite
élastique sigma 0,01*
Ta slovenski standard je istoveten z: ISO 6282:2018
ICS:
21.100.10 Drsni ležaji Plain bearings
SIST ISO 6282:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 6282:2020
---------------------- Page: 2 ----------------------
SIST ISO 6282:2020
INTERNATIONAL ISO
STANDARD 6282
Second edition
2018-06
Plain bearings — Metallic thin-walled
half bearings — Determination of the
σ *-limit
0,01
Paliers lisses — Demi-coussinets minces métalliques — Détermination
de la limite élastique σ *
0,01
Reference number
ISO 6282:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
SIST ISO 6282:2020
ISO 6282:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 6282:2020
ISO 6282:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
5 Preparation of test specimen . 2
6 Procedure. 2
7 Expression of results . 3
Annex A (informative) Evaluation sheet for the determination of the σ *-limit of metallic
0,01
thin-walled half bearings . 4
Bibliography . 5
© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 6282:2020
ISO 6282:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 123, plain bearings, Subcommittee SC 2,
Materials and lubricants, their properties, characteristics, test methods and testing conditions.
This second edition cancels and replaces the first edition (ISO 6282:1983), which has been technically
revised. The main changes compared to the previous edition are as follows:
— The Scope has been revised.
— Clauses 3, 4, 5, and 6 have been revised.
— Figure 1 has been revised.
iv © ISO 2018 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO 6282:2020
INTERNATIONAL STANDARD ISO 6282:2018(E)
Plain bearings — Metallic thin-walled half bearings —
Determination of the σ *-limit
0,01
1 Scope
This document specifies a method of determining the σ *-limit for the steel backing of thin-walled
0,01
multilayer half bearings for bearing diameters up to 80 mm. It can also be used for bearing diameters
up to 160 mm.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.