SIST EN ISO 11111-3:2005/A2:2017
(Amendment)Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2 (ISO 11111-3:2005/Amd 2:2016)
Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2 (ISO 11111-3:2005/Amd 2:2016)
2014-09-30: correction - Draft available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).
Textilmaschinen - Sicherheitsanforderungen - Teil 3: Vliesstoffmaschinen - Änderung 2 (ISO 11111-3:2005/Amd 2:2016)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 3: Machines de production de nontissés - Amendement 2 (ISO 11111-3:2005/Amd 2:2016)
Tekstilni stroji - Varnostne zahteve - 3. del: Stroji za netkane materiale - Dopolnilo A2 (ISO 11111-3:2005/Amd 2:2016)
General Information
- Status
- Published
- Public Enquiry End Date
- 09-Mar-2015
- Publication Date
- 12-Dec-2016
- Technical Committee
- VSN - Safety of machinery
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 05-Dec-2016
- Due Date
- 09-Feb-2017
- Completion Date
- 13-Dec-2016
Relations
- Effective Date
- 01-Jan-2017
Overview
EN ISO 11111-3:2005/A2:2016 - Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005/Amd 2:2016) is a CEN-endorsed amendment that updates the Part 3 safety requirements for nonwoven (nontissé / Vliesstoff) machinery. Approved by CEN on 5 May 2016 and published as an amendment to EN ISO 11111-3:2005, this document clarifies normative references, adds noise‑reduction cross-references and introduces new requirements for spunlace machines. It is intended to support conformity with EU Machinery Directive 2006/42/EC where cited in the Official Journal.
Key topics and requirements
- Scope and normative references
- Updates references to ISO 11111-1:2016 and amends references to other parts of the ISO 11111 series (including noted amendments).
- Adds ISO 23771 (design measures for reduction of noise emissions) and cross-references ISO 9902-series for noise measurement.
- Spunlace machines (new Clause 5.5)
- Defines spunlace process: web entanglement by high‑pressure water jets.
- Identifies mechanical hazards from water jets, jet strips, conveyor and drive rollers - e.g., squeezing, cutting, winding, plunging or puncture.
- Specifies general safety measures: fixed enclosing guards (casing) or movable guards with interlocking and guard-locking on the operating side.
- For operations that require access while the machine is running (threading up), the standard requires that the high‑pressure water jet cannot be activated; lifting/lowering devices must use hold‑to‑run control when movable guards are open.
- Where reduced speed operation with emergency stop is used, multiple, easily accessible emergency stop devices are required; the type and placement of devices (pushbuttons, rope switches, safety edges) must be determined by risk assessment.
- Other addressed areas
- Electrical equipment and control systems, starting/stopping, mechanical hazards, fluid systems, noise, ergonomics, elevated working positions, conveyors, fans, platforms and specific machine elements (rollers, shafts, doors, observation windows).
Practical applications and users
This amendment is essential for:
- Machine designers and manufacturers of nonwoven and spunlace equipment to meet safety-by-design and guarding requirements.
- Safety engineers and risk assessors implementing machine safeguarding, hold‑to‑run controls and emergency stop strategies.
- Compliance officers and conformity assessment bodies using the standard to demonstrate presumption of conformity with EU Directive 2006/42/EC.
- Plant managers and maintenance personnel responsible for safe operation, access procedures and ergonomic considerations.
Related standards
- ISO 11111-1:2016 (general principles for textile machinery safety)
- ISO 11111-2:2005 (with listed amendments)
- ISO 11111-6 and ISO 11111-7 (as amended)
- ISO 12100 (machine safety - risk assessment and reduction)
- ISO 23771 (noise‑reduction measures for textile machinery)
- ISO 9902-series (noise emission measurement)
Keywords: EN ISO 11111-3:2005/A2:2016, nonwoven machinery safety, spunlace machines, textile machinery safety, ISO 11111-1:2016, ISO 23771, Machinery Directive 2006/42/EC.
Frequently Asked Questions
SIST EN ISO 11111-3:2005/A2:2017 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2 (ISO 11111-3:2005/Amd 2:2016)". This standard covers: 2014-09-30: correction - Draft available 2014-08-27 (see ISO notification in dataservice on 2014-09-30). 2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).
2014-09-30: correction - Draft available 2014-08-27 (see ISO notification in dataservice on 2014-09-30). 2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).
SIST EN ISO 11111-3:2005/A2:2017 is classified under the following ICS (International Classification for Standards) categories: 59.120.99 - Other textile machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 11111-3:2005/A2:2017 has the following relationships with other standards: It is inter standard links to SIST EN ISO 11111-3:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 11111-3:2005/A2:2017 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN ISO 11111-3:2005/A2:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2017
Tekstilni stroji - Varnostne zahteve - 3. del: Stroji za netkane materiale - Dopolnilo
A2 (ISO 11111-3:2005/Amd 2:2016)
Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2
(ISO 11111-3:2005/Amd 2:2016)
Textilmaschinen - Sicherheitsanforderungen - Teil 3: Vliesstoffmaschinen - Änderung 2
(ISO 11111-3:2005/Amd 2:2016)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 3: Machines de production
de nontissés - Amendement 2 (ISO 11111-3:2005/Amd 2:2016)
Ta slovenski standard je istoveten z: EN ISO 11111-3:2005/A2:2016
ICS:
59.120.99 Drugi tekstilni stroji Other textile machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11111-3:2005/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2016
EUROPÄISCHE NORM
ICS 59.120.99
English Version
Textile machinery - Safety requirements - Part 3:
Nonwoven machinery (ISO 11111-3:2005/Amd 2:2016)
Matériel pour l'industrie textile - Exigences de sécurité Textilmaschinen - Sicherheitsanforderungen - Teil 3:
- Partie 3: Machines de production de nontissés (ISO Vliesstoffmaschinen (ISO 11111-3:2005/Amd 2:2016)
11111-3:2005/Amd 2:2016)
This amendment A2 modifies the European Standard EN ISO 11111-3:2005; it was approved by CEN on 5 May 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-3:2005/A2:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 11111-3:2005/A2:2016) has been prepared by Technical Committee ISO/TC 72
“Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 11111-3:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2016,
and conflicting national standards shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11111-3:2005/Amd 2:2016 has been approved by CEN as
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/396
(Machinery) to provide a means of conforming to essential requirements of the New Approach Directive
2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex I of Directive 2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) Remarks/Notes
Directive 2006/42/EC of this EN
All essential requirements of Annex I All clauses are covered IMPORTANT — Compliance with the
are covered requirements of EN ISO 11111-1 and
EN ISO 11111-3 is necessary to
achieve presumption of conformity
with the relevant essential
requirements.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 11111-3
First edition
2005-02-15
AMENDMENT 2
2016-05-15
Textile machinery — Safety
requirements —
Part 3:
Nonwoven machinery
AMENDMENT 2
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 3: Machines de production de nontissés
AMENDEMENT 2
Reference number
ISO 11111-3:2005/Amd.2:2016(E)
©
ISO 2016
ISO 11111-3:2005/Amd.2:2016(E)
© ISO 2016, Published in Switzerland
A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...