SIST EN ISO 5356-2:2007

SLOVENSKI STANDARD
SIST EN ISO 5356-2:2007
01-oktober-2007
1DGRPHãþD
SIST EN 1281-2:2000
$QHVWH]LMVNDLQUHVSLUDWRUQDRSUHPD.RQLþQLSULNOMXþNLGHO1RVLOQLSULNOMXþNL]
QDYRMHP,62
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded
weight-bearing connectors (ISO 5356-2:2006)
Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 2: Gewichtstragende
Konnektoren mit Schraubgewinde (ISO 5356-2:2006)
Matériel d'anesthésie et de réanimation respiratoire - Raccords coniques - Partie 2:
Raccords a vis supportant un certain poids (ISO 5356-2:2006)
Ta slovenski standard je istoveten z: EN ISO 5356-2:2007
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN ISO 5356-2:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 5356-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 11.040.10 Supersedes EN 1281-2:1995
English Version
Anaesthetic and respiratory equipment - Conical connectors -
Part 2: Screw-threaded weight-bearing connectors (ISO 5356-
2:2006)
Matériel d'anesthésie et de réanimation respiratoire - Anästhesie- und Beatmungsgeräte - Konische Konnektoren
Raccords coniques - Partie 2: Raccords à vis supportant un - Teil 2: Gewichtstragende Konnektoren mit
certain poids (ISO 5356-2:2006) Schraubgewinde (ISO 5356-2:2006)
This European Standard was approved by CEN on 26 July 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5356-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 5356-2:2007 (E)

Foreword

The text of ISO 5356-2:2006 has been prepared by Technical Committee ISO/TC 121 "Anaesthetic and
respiratory equipment” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 5356-2:2007 by Technical Committee CEN/TC 215 "Respiratory and anaesthetic equipment", the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn
at the latest by February 2008.
This document supersedes EN 1281-2:1995.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
EN ISO 5356 consists of the following parts under the general title Anaesthetic and respiratory equipment –
Conical connectors.
– Part 1: Cones and sockets
– Part 2: Screw-threaded weight-bearing connectors;
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.


Endorsement notice
The text of ISO 5356-2:2006 has been approved by CEN as EN ISO 5356-2:2007 without any modifications.

2

---------------------- Page: 3 ----------------------

EN 5356-2:2007 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential Requirements of
EU Directive (93/42/EEC Medical devices)
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 93/42/EEC Medical devices.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 93/42/EEC Medical
devices
Clause(s)/sub-clause(s) of this Essential Requirements (ERs) Remarks/Notes
EN of Directive 93/42/EEC
4 1, 2, 3, 4, 9.1

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.


3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 5356-2
Second edition
2006-09-01

Anaesthetic and respiratory equipment —
Conical connectors —
Part 2:
Screw-threaded weight-bearing
connectors
Matériel d'anesthésie et de réanimation respiratoire — Raccords
coniques —
Partie 2: Raccords à vis supportant un certain poids




Reference number
ISO 5356-2:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

ISO 5356-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below
...