Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard

EN 3774-004 specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between - 55 °C and 125 °C for ratings ≤ 15 A and - 55 °C to 90 °C for ratings > 15 A and at an altitude of 22 000 m max. These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action “trip-free” tripping. They will continue to function up to the short-circuit current.

Luft- und Raumfahrt - Schutzschalter, dreipolig, temperaturkompensiert, Nennströme von 1 A bis 25 A - Teil 004: UNC-Klemmengewinde - Produktnorm

Diese Norm legt die Eigenschaften dreipoliger Schutzschalter fest, temperaturkompensiert, für Nennströme von 1 A bis 25 A, zur Verwendung im Bordnetz von Luftfahrzeugen bei Temperaturen zwischen 55 °C und 125 °C für Nennströme  15 A und 55 °C bis 90 °C für Nennströme  15 A und in einer maximalen Höhe von 22 000 Metern.
Diese Schutzschalter werden durch einen Druck-Zugtaster (Aktuator) mit zeitgesteuerter Freiauslösung ge-steuert.
Sie sind bis zum Kurzschlussstrom weiterhin funktionsfähig.

Série aérospatiale - Disjoncteurs tripolaires compensés en température, intensités nominales 1 A à 25 A - Partie 004 : Bornes à filetage UNC - Norme de produit

Aeronavtika - Odklopniki, tripolni, temperaturno kompenzirani, nazivni tok od 1 A do 25 A - 004. del: UNC-navojni priključki - Standard za proizvod

Standard EN 3774-004 določa značilnosti tripolnih odklopnikov, temperaturno kompenziranih, z nazivnim tokom od 1 A do 25 A, ki se uporabljajo v letalskih vezjih pri temperaturi med - 55 °C in 125 °C za nazivne vrednosti ≤ 15 A in od - 55 °C do 90 °C za nazivne vrednosti > 15 A na maks. višini 22 000 m. Ti odklopniki se upravljajo z enim gumbom (sprožilom) vrste potisni-povleci z zakasnjenim proženjem brez sprožila . Delovali bodo do kratkega stika.

General Information

Status
Withdrawn
Publication Date
22-Oct-2014
Withdrawal Date
26-May-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
27-May-2024
Due Date
19-Jun-2024
Completion Date
27-May-2024

Relations

Buy Standard

Standard
EN 3774-004:2014
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3774-004:2014
01-november-2014
1DGRPHãþD
SIST EN 3774-004:2002
$HURQDYWLND2GNORSQLNLWULSROQLWHPSHUDWXUQRNRPSHQ]LUDQLQD]LYQLWRNRG$
GR$GHO81&QDYRMQLSULNOMXþNL6WDQGDUG]DSURL]YRG
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated
currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
Luft- und Raumfahrt - Schutzschalter, dreipolig, temperaturkompensiert, Nennströme von
1 A bis 25 A - Teil 004: UNC-Klemmengewinde - Produktnorm
Série aérospatiale - Disjoncteurs tripolaires compensés en température, intensités
nominales 1 A à 25 A - Partie 004 : Bornes à filetage UNC - Norme de produit
Ta slovenski standard je istoveten z: EN 3774-004:2014
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3774-004:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3774-004:2014

---------------------- Page: 2 ----------------------

SIST EN 3774-004:2014

EUROPEAN STANDARD
EN 3774-004

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 49.060 Supersedes EN 3774-004:1999
English Version
Aerospace series - Circuit breakers, three-pole, temperature
compensated, rated currents 1 A to 25 A - Part 004: UNC thread
terminals - Product standard
Série aérospatiale - Disjoncteurs tripolaires compensés en Luft- und Raumfahrt - Schutzschalter, dreipolig,
température, intensités nominales 1 A à 25 A - Partie 004 : temperaturkompensiert, Nennströme von 1 A bis 25 A - Teil
Bornes à filetage UNC - Norme de produit 004: UNC-Klemmengewinde - Produktnorm
This European Standard was approved by CEN on 12 October 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3774-004:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3774-004:2014
EN 3774-004:2014 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Dimensions and mass .5
4.1 Dimensional characteristics .5
4.2 Electrical diagram .6
4.3 Mass .6
4.4 Panel mounting .6
5 Characteristics .6
5.1 Material, surface treatment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.