SIST EN 13172:2024

SLOVENSKI STANDARD
oSIST prEN 13172:2023
01-junij-2023
Nadomešča:
SIST EN 13172:2012
Toplotnoizolacijski proizvodi - Skupna pravila vrednotenja
Thermal insulation products - Common evaluation rules
Wärmedämmstoffe - Gemeinsame Bewertungsregeln
Produits isolants thermiques - Règles d’évaluation communes
Ta slovenski standard je istoveten z: prEN 13172
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
oSIST prEN 13172:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 13172:2023
oSIST prEN 13172:2023
DRAFT
EUROPEAN STANDARD
prEN 13172
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS 91.100.60 Will supersede EN 13172:2012
English Version
Thermal insulation products - Common evaluation rules
Produits isolants thermiques - Règles d'évaluation Wärmedämmstoffe - Gemeinsame Bewertungsregeln
communes (to be confirmed) (to be confirmed)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13172:2023 E
worldwide for CEN national Members.

oSIST prEN 13172:2023
prEN 13172:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 Assessment and Verification of Constancy of Performance . 6
4.1 General . 6
4.2 Type of production process . 7
4.3 Product family . 7
5 Verification of constancy of performance - Factory production control . 7
5.1 General . 7
5.2 Organization . 8
5.2.1 General . 8
5.2.2 Responsibility and authority . 8
5.2.3 Factory production control system review . 8
5.3 Documents defining the factory production control system . 8
5.4 Inspection and testing . 9
5.4.1 General . 9
5.4.2 Test equipment . 9
5.4.3 Inspection and testing of raw materials and other constituent materials .11
5.4.4 Inspection and testing during production .11
5.4.5 Product testing .11
5.4.6 Inspection and test status .13
5.4.7 Inspection and test records (factory production control log) .14
5.5 Actions in the case of non-constancy of performance of the product .14
5.6 Handling, storage, packaging, and marking of products .14
5.7 Traceability of products .14
5.8 Training of persons .14
6 Assessment of performance (AoP) .15
Annex A (informative) Guidance for conformity of the products under voluntary
certification activities (not for CE marking purposes) .16
A.1 Bodies involved in the evaluation of conformity procedure .16
A.2 Tasks for the accredited body .16
A.2.1 General .16
A.2.2 Initial inspection of manufacturing plant and factory production control .16
A.2.3 Sampling .17
A.2.4 Initial testing .17
A.2.5 Continuing surveillance .18
oSIST prEN 13172:2023
prEN 13172:2023 (E)
A.3 Conformity mark . 23
A.3.1 General . 23
A.3.2 Issuance of certificate of conformity . 23
A.3.3 Restriction, suspension or withdrawal of certificate . 23
Annex B (informative) Guidance for common evaluation of products under AVCP system . 25
B.1 Bodies involved in the assessment and verification of constancy of performance
(AVCP) . 25
B.2 Tasks for the notified body . 25
B.2.1 General . 25
B.2.2 Initial inspection of manufacturing plant and factory production control . 25
B.2.3 Sampling . 26
B.2.4 Assessment of Performance . 26
B.2.5 Continuing surveillance, assessment and evaluation of the factory production
control . 27
B.3 Certificate of constancy of performance . 28
B.3.1 Issuance of certificate of constancy of performance . 28
B.3.2 Restriction, suspension or withdrawal of the certificate of constancy of performance
................................................................................................................................................................... 29
Annex C (informative) Criteria for assessing non-conformity – Procedures in case of a
complaint . 30
C.1 Complaint on the product declaration . 30
C.1.1 General . 30
C.1.2 Complaint on the declared thermal resistance or thermal conductivity . 30
C.1.3 Complaint on other characteristics . 31
C.2 Complaint on a lot . 31
Bibliography . 32
oSIST prEN 13172:2023
prEN 13172:2023 (E)
European foreword
This document (prEN 13172:2023) has been prepared by Technical Committee CEN/TC 88 “Thermal
insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13172:2012.
The main changes compared with EN 13172:2012 are as follows:
— the adaptation of this document to the terminology used in the European Regulation No 305/2011
(i.e. Construction Products Regulation - CPR) with AVCP system;
— the removal of references to third parties, bodies and manufacturers into clauses and annexes that
can be used in conjunction with harmonized technical specifications;
— the addition of products for civil engineering applications in the scope of this document;
— the addition of a subclause for abbreviated terms;
— the split of Clause 4 into three subclauses;
— the updates and technical adjustments of Clause 5;
— the merging of Annexes B, C and D.
This document is intended to be used as a supporting standard in conjunction with harmonized technical
specifications, product standards and any other assessment documents of thermal insulation products to
ensure common evaluation rules for all stakeholders.
This document contains three informative annexes:
— Annex A, Guidance for conformity of the products under voluntary certification activities (not for CE
marking purposes);
— Annex B, Guidance for common evaluation of the products under AVCP system;
— Annex C, Criteria for assessing non-conformity – Procedure in case of a complaint.
oSIST prEN 13172:2023
prEN 13172:2023 (E)
1 Scope
This document specifies common evaluation rules useful for the verification of the assessment and
verification of constancy of performance of a thermal insulation product with harmonized technical
specifications, product standards and any other assessment documents. Harmonized technical
specifications, product standards and other assessment documents are called European product
specifications in this document.
This document applies to factory made products for buildings, factory made products for building
equipment and industrial installations, in situ products for buildings, in situ products for building
equipment and industrial installations, to products for civil engineering applications, and to external
thermal insulation composite kits.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments
...