SIST EN 1527:2019/oprA1:2021
(Amendment)Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
This document specifies requirements for the design manual system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.
Schlösser und Baubeschläge - Beschläge für Schiebetüren/-tore und Falttüren/-tore - Anforderungen und Prüfverfahren
Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes - Exigences et méthodes d'essai
Stavbno okovje - Okovje za drsna in zgibna vrata - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1527:2019/oprA1:2021
01-februar-2021
Stavbno okovje - Okovje za drsna in zgibna vrata - Zahteve in preskusne metode
Building hardware - Hardware for sliding doors and folding doors - Requirements and
test methods
Schlösser und Baubeschläge - Beschläge für Schiebetüren/-tore und Falttüren/-tore -
Anforderungen und Prüfverfahren
Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes -
Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1527:2019/prA1
ICS:
91.190 Stavbna oprema Building accessories
SIST EN 1527:2019/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1527:2019/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 1527:2019/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 1527:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2020
ICS 91.190
English Version
Building hardware - Hardware for sliding doors and
folding doors - Requirements and test methods
Quincaillerie du bâtiment - Quincaillerie pour portes Schlösser und Baubeschläge - Beschläge für
coulissantes et portes pliantes - Exigences et méthodes Schiebetüren/-tore und Falttüren/-tore -
d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 1527:2019. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1527:2019/prA1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1527:2019/oprA1:2021
EN 1527:2019/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to 4.4.2, "For sliding doors" . 4
2 Modification to 4.4.4, "For cantilever gate" . 4
3 Modification to 6.3.3.1.1, "Slam test for slide fittings with built-in end stops or damping
devices".
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.