SIST EN IEC 62561-4:2024
(Main)Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4:2023)
Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4:2023)
IEC 62561-4:2023 is available as which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62561-4:2023 deals with the requirements and tests for metallic and non-metallic conductor fasteners that are used to retain and support the air-termination, down-conductor and earth-termination systems. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with the latest edition of ISO IEC 60068-2-52:2017 relating to salt mist atmosphere treatment;
b) alignment with the new edition of ISO 22479:2019 relating to humid sulphurous atmosphere treatment;
c) new normative annex for the applicability of previous tests.
Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen an Leitungshalter (IEC 62561-4:2023)
Composants de systèmes de protection contre la foudre (CSPF) - Partie 4: Exigences pour les fixations de conducteur (IEC 62561-4:2023)
IEC 62561-4:2023 est disponible sous forme de IEC 62561-4:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 62561-4:2023 traite des exigences et des essais pour les fixations métalliques et non métalliques de conducteurs utilisées pour maintenir et supporter les dispositifs de capture, les conducteurs de descente et les prises de terre. Cette troisième édition annule et remplace la deuxième édition parue en 2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) alignement sur la dernière édition de l'ISO IEC 60068-2-52:2017 concernant le traitement en atmosphère au brouillard salin;
b) alignement sur la nouvelle édition de l'ISO 22479:2019 concernant le traitement en atmosphère sulfureuse humide;
c) nouvelle annexe normative concernant l'applicabilité d'essais précédents.
Elementi sistema za zaščito pred strelo (LPSC) - 4. del: Zahteve za pritrdilne elemente (IEC 62561-4:2023)
Standard IEC 62561-4:2023 je na voljo kot IEC 62561-4:2023 RLV, ki vsebuje mednarodni standard in njegovo različico z revizijami, ki prikazujejo vse spremembe tehnične vsebine v primerjavi s prejšnjo izdajo. Standard IEC 62561-4:2023 obravnava zahteve in preskuse za kovinske ter nekovinske pritrdilne elemente, ki se uporabljajo za ohranitev in podporo lovilnega, odvodnega ter ozemljitvenega sistema. Tretja izdaja razveljavlja in nadomešča drugo izdajo, objavljeno leta 2017. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) uskladitev z najnovejšo izdajo standarda ISO IEC 60068-2-52:2017 v zvezi s preskusom v atmosferi s slano meglo;
b) uskladitev z novo izdajo standarda ISO 22479:2019 v zvezi s preskusom v vlažni žveplasti atmosferi;
c) nov normativni dodatek v zvezi z uporabnostjo prejšnjih preskusov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62561-4:2024
01-januar-2024
Nadomešča:
SIST EN 62561-4:2018
Elementi sistema za zaščito pred strelo (LPSC) - 4. del: Zahteve za pritrdilne
elemente (IEC 62561-4:2023)
Lightning protection system components (LPSC) - Part 4: Requirements for conductor
fasteners (IEC 62561-4:2023)
Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen an Leitungshalter (IEC 62561-
4:2023)
Composants de systèmes de protection contre la foudre (CSPF) - Partie 4: Exigences
pour les fixations de conducteur (IEC 62561-4:2023)
Ta slovenski standard je istoveten z: EN IEC 62561-4:2023
ICS:
91.120.40 Zaščita pred strelo Lightning protection
SIST EN IEC 62561-4:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62561-4:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62561-4:2024
EUROPEAN STANDARD EN IEC 62561-4
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2023
ICS 29.020; 91.120.40 Supersedes EN 62561-4:2017
English Version
Lightning protection system components (LPSC) - Part 4:
Requirements for conductor fasteners
(IEC 62561-4:2023)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 4: Anforderungen
(CSPF) - Partie 4: Exigences pour les fixations de an Leitungshalter
conducteurs (IEC 62561-4:2023)
(IEC 62561-4:2023)
This European Standard was approved by CENELEC on 2023-11-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-4:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62561-4:2024
EN IEC 62561-4:2023 (E)
European foreword
The text of document 81/734/FDIS, future edition 3 of IEC 62561-4, prepared by IEC/TC 81 "Lightning
protection" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62561-4:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-08-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-24
document have to be withdrawn
This document supersedes EN 62561-4:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62561-4:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 62305-1 NOTE Approved as EN 62305-1
IEC 62305-4 NOTE Approved as EN 62305-4
IEC 62561-4:2017 NOTE Approved as EN 62561-4:2017 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62561-4:2024
EN IEC 62561-4:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undate
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.