SIST EN ISO 19152-1:2024
(Main)Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic Conceptual Model (ISO 19152-1:2024)
Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic Conceptual Model (ISO 19152-1:2024)
This document:
— defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration/georegulation;
— provides an abstract, conceptual model with packages related to:
— parties (people and organizations),
— basic administrative units, rights, responsibilities and restrictions (RRRs),
— spatial units,
— a generic conceptual model (sources and versioned object);
— provides terminology for land administration/georegulation, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
— provides a content model independent of encoding, allowing for the support of various encodings;
— provides a basis for national and regional profiles;
— enables the combining of land administration/georegulation information from different sources in a coherent manner.
The following are outside the scope of this document:
— interference with (national) land administration/georegulation laws with potentially legal implications due to the possibility of describing different types of systems but in the same notation;
— construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available.
This document provides the concepts and basic structure for standardization in the land administration/georegulation domain. It defines a general schema that permits regulatory information to be described. It also allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that sourcing of all information systems can be maintained. This document establishes the common elements and basic schema upon which more detailed schema can be established.
Geoinformation - Land Administration Domain Model (LADM) (ISO 19152-1:2024)
Information géographique - Modèle du domaine de l'administration des terres (LADM) - Partie 1: Modèle conceptuel générique (ISO 19152-1:2024)
Le présent document:
— définit un modèle de référence du domaine de l'administration des terres (LADM) qui concerne les composants relatifs aux informations de base sur l'administration des terres ou la géoréglementation;
— fournit un modèle conceptuel abstrait composé de paquetages relatifs:
— aux parties (individus et organisations);
— aux unités administratives de base, droits, responsabilités et restrictions (RRR);
— aux unités spatiales;
— à un modèle conceptuel générique (sources et Versioned Object);
— propose une terminologie pour l'administration des terres et la géoréglementation, fondée sur divers systèmes nationaux et internationaux, aussi simple que possible afin d'être utile dans la pratique. La terminologie permet d'obtenir une description commune de différentes pratiques et procédures, officielles ou non, dans diverses juridictions;
— fournit un modèle de contenu indépendant du codage et permettant la prise en charge de différents codages;
— propose une base pour les profils nationaux et régionaux;
— permet la combinaison cohérente des informations relatives à l'administration des terres ou la géoréglementation issues de différentes sources.
Les éléments suivants ne relèvent pas du domaine d'application du présent document:
— les interférences avec les lois (nationales) d'administration des terres ou de géoréglementation susceptibles d'avoir des implications juridiques en raison de la possibilité de décrire différents types de systèmes, mais dans la même notation;
— l'élaboration de bases de données externes avec les données relatives aux parties, aux adresses, à l'occupation des terres, au réseau public physique, aux archives et à la fiscalité. Cependant, le modèle du domaine de l'administration des terres (LADM) propose des classes types pour ces jeux de données, afin d'indiquer quels éléments des jeux de données le LADM attend de ces sources externes, lorsqu'elles sont disponibles.
Le présent document fournit les concepts et la structure de base pour la normalisation dans le domaine de l'administration des terres ou la géoréglementation. Il définit un schéma général permettant la description des informations réglementaires. Il permet également l'expression des relations avec de multiples parties et groupes, ainsi qu'une structure de référencement assurant la mise à jour des sources de l'ensemble des systèmes d'information. Le présent document établit les éléments communs et un schéma de base pouvant servir de socle à un schéma plus détaillé.
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 1. del: Generični konceptualni način (ISO 19152-1:2024)
Ta dokument:
– določa referenčni model domene za zemljiško administracijo (LADM), ki zajema osnovne informacijske komponente zemljiške administracije/georegulacije;
– vključuje povzetek, konceptualni model s svežnji, ki se navezujejo na:
– strani (osebe in organizacije);
– osnovne administrativne enote, pravice, obveznosti in omejitve (RRR);
– prostorske enote;
– generični konceptualni način (viri in objekti z več različicami);
– podaja terminologijo za zemljiško administracijo/georegulacijo, ki temelji na številnih nacionalnih in mednarodnih sistemih ter je dovolj enostavna, da je uporabna v praksi. Terminologija omogoča skupen opis številnih uradnih in neuradnih praks ter postopkov v okviru različnih pravnih pristojnosti;
– zagotavlja vsebinski model, neodvisen od kodiranja, ki omogoča podporo za različne vrste kodiranja;
– zagotavlja podlago za profile na nacionalni in regionalni ravni;
– omogoča skladno združevanje informacij s področja zemljiške administracije/georegulacije iz različnih virov.
Naslednje ne spada na področje uporabe tega dokumenta:
– poseganje v (nacionalno) zakonodajo na področju zemljiške administracije/georegulacije, ki bi lahko imelo pravne posledice, saj obstaja možnost opisa različnih vrst sistemov v istem zapisu;
– vzpostavitev zunanjih podatkovnih zbirk s podatki o straneh, naslovu, pokrovnosti, mreži fizične uporabnosti, arhivu in obdavčitvi. V modelu domene za zemljiško administracijo so stereotipni razredi za te podatkovne nize, da je prikazano, kateri elementi podatkovnih nizov se v okviru modela domene za zemljiško administracijo pričakujejo od teh zunanjih virov, če so na voljo.
Ta dokument zagotavlja koncepte in osnovno strukturo za standardizacijo v domeni za zemljiško administracijo/georegulacijo. Določa splošno shemo, ki omogoča opisovanje regulativnih informacij. Poleg tega omogoča, da se razmerje do več strank in skupin izrazi skupaj z referenčno strukturo, s čimer je mogoče ohraniti izvor vseh informacijskih sistemov. Ta dokument določa skupne elemente in osnovno shemo, na podlagi katere je mogoče vzpostaviti podrobnejšo shemo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN ISO 19152:2013
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 1.
del: Generični konceptualni način (ISO 19152-1:2024)
Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic
Conceptual Model (ISO 19152-1:2024)
Geoinformation - Land Administration Domain Model (LADM) (ISO 19152-1:2024)
Information géographique - Modèle du domaine de l'administration des terres (LADM) -
Partie 1: Modèle conceptuel générique (ISO 19152-1:2024)
Ta slovenski standard je istoveten z: EN ISO 19152-1:2024
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19152-1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19152:2012
English Version
Geographic information - Land Administration Domain
Model (LADM) - Part 1: Generic conceptual model (ISO
19152-1:2024)
Information géographique - Modèle du domaine de Geoinformation - Land Administration Domain Model
l'administration des terres (LADM) - Partie 1: Modèle (LADM) - Teil 1: Grundlagen (ISO 19152-1:2024)
conceptuel générique (ISO 19152-1:2024)
This European Standard was approved by CEN on 18 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19152-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 19152-1:2024) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19152:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19152-1:2024 has been approved by CEN as EN ISO 19152-1:2024 without any
modification.
International
Standard
ISO 19152-1
First edition
Geographic information — Land
2024-01
Administration Domain Model
(LADM) —
Part 1:
Generic conceptual model
Information géographique — Modèle du domaine de
l'administration des terres (LADM) —
Partie 1: Modèle conceptuel générique
Reference number
ISO 19152-1:2024(en) © ISO 2024
ISO 19152-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 19152-1:2024(en)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions .2
3.2 Acronyms and abbreviated terms .6
4 Conformance requirements and notation . 6
4.1 Conformance .6
4.2 Conformance classes .6
4.3 Notation .6
5 Conceptual basis . 7
5.1 General .7
5.2 Packages and sub-packages of the core LADM .7
5.3 Conceptual Overview .8
5.4 Party Package .8
5.5 Administrative Package .9
5.6 Spatial Unit Package .10
5.7 Generic Conceptual Model Package .11
6 LADM objects .11
6.1 General .11
6.2 General feature model .11
6.3 Classes of generic conceptual model package.11
6.3.1 Versioned object .11
6.3.2 Fraction. 13
6.3.3 Oid . 13
6.3.4 LA_Source . 13
Annex A (normative) Abstract test suite .15
Annex B (informative) Overview of LADM parts, packages and extended core classes .18
Annex C (informative) Code list .27
Bibliography .28
iii
ISO 19152-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of stand
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.