iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11199-2:2000

(Main)

Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999)

Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999)

Gehilfen für beidarmige Handhabung - Anforderungen und Prüfverfahren - Teil 2: Rollatoren (ISO 11199-2:1999)

Dieser Teil von ISO 11199 legt die Anforderungen und Verfahren für die Ermüdungsprüfung, die Prüfung der statischen Beanspruchbarkeit und Kippsicherheit für Rollatoren ohne Zubehör fest, sofern es nicht in speziellen Prüfverfahren anders festgelegt wird. Dieser Teil der ISO 11199 enthält ebenfalls Anforderungen für Sicherheit, Ergonomie, Leistungsfähigkeit, Kennzeichnung und Aufschriften. Die Anforderungen und Prüfungen beruhen auf dem alltäglichen Gebrauch von Rollatoren, die für Personen mit einem Körpergewicht von mindestens 35 kg vorgesehen sind.

Aides a la marche manipulées avec les deux bras - Exigences et méthodes d'essai - Partie 2: Déambulateurs (ISO 11199-2:1999)

Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999)

General Information

Status
Withdrawn
Publication Date
30-Jun-2000
Withdrawal Date
30-Jun-2005
ICS
11.180.10 - Aids and adaptation for moving
Technical Committee
VAZ - Healthcare
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2005
Due Date
01-Jul-2005
Completion Date
01-Jul-2005
Ref Project
EN ISO 11199-2:1999 - Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999)

Relations

Replaced By
SIST EN ISO 11199-2:2005 - Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005)
Effective Date
01-Jul-2005

Buy Standard

EN ISO 11199-2:2000EN ISO 11199-2:2000
PreviousNext
Standard
EN ISO 11199-2:2000
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11199-2:2000
01-julij-2000
Walking aids manipulated by both arms - Requirements and test methods - Part 2:
Rollators (ISO 11199-2:1999)
Walking aids manipulated by both arms - Requirements and test methods - Part 2:
Rollators (ISO 11199-2:1999)
Gehilfen für beidarmige Handhabung - Anforderungen und Prüfverfahren - Teil 2:
Rollatoren (ISO 11199-2:1999)
Aides a la marche manipulées avec les deux bras - Exigences et méthodes d'essai -
Partie 2: Déambulateurs (ISO 11199-2:1999)
Ta slovenski standard je istoveten z: EN ISO 11199-2:1999
ICS:
11.180.10 3ULSRPRþNLLQSULODJRGLWYH]D Aids and adaptation for
JLEDQMH moving
SIST EN ISO 11199-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 11199-2:2000

---------------------- Page: 7 ----------------------

SIST EN ISO 11199-2:2000

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12183:2022(Main)
Manual wheelchairs - Requirements and test methods
EN 12183:2022

This document specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not greater than 250 kg, including:
—   stand-up manual wheelchairs, and
—   manual wheelchairs for showering and/or toileting.
This document does not apply to custom-made manual wheelchairs or manual wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12184:2022(Main)
Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
EN 12184:2022

TThis document specifies requirements and test methods for electrically powered wheelchairs, with a maximum speed not exceeding 20 km/h, intended to carry one person of mass not greater than 300 kg, including:
-   electrically powered scooters with three or more wheels,
-   manual wheelchairs with an add-on drive system,
-   handrim-activated power-assisted wheelchairs,
-   electrically powered stand-up wheelchairs,
-   balancing wheelchairs,
-   wheelchairs with a pivot drive wheel unit, and
-   assistant-guided wheelchairs.
This document does not apply to custom-made electrically powered wheelchairs or electrically powered wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10535:2022(Main)
Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021)
EN ISO 10535:2021

This International Standard specifies requirements and test methods only for hoists and body-support units
intended for the transfer of disabled persons as classified in ISO 9999:2002:
⎯ 12 36 03 Mobile hoists with sling seats
⎯ 12 36 04 Standing mobile hoists
⎯ 12 36 06 Mobile hoists with solid seats
⎯ 12 36 09 Hoist trolleys
⎯ 12 36 12 Stationary hoists fixed to the wall/walls, floor and/or ceiling
⎯ 12 36 15 Stationary hoists fixed to, mounted in or on another product
⎯ 12 36 18 Stationary free-standing hoists
⎯ 12 36 21 Body-support units for hoists
This International Standard does not apply to devices that transport persons between two levels (floors) of a
building.
It does not include methods for the determination of ageing or corrosion of such hoists and units.
The requirements of this International Standard are formulated with regard to the needs of both the disabled
persons being hoisted and the attendant using the hoist.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11199-2:2021(Main)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2021)
EN ISO 11199-2:2021

This document specifies requirements and test methods of rollators being used as assistive products for
walking with wheels, manipulated by both arms, without accessories, unless specified in the particular
test procedure. This document also gives requirements relating to safety, ergonomics, performance and
information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking
for a maximum user mass as specified by the manufacturer. This document includes rollators specified
for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking
tables, for which ISO 11199-3 is applicable.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11199-1:2021(Main)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021)
EN ISO 11199-1:2021

This document specifies requirements and test methods for walking frames used as assistive products
for walking, manipulated by both arms, without accessories, unless specified in the particular test
procedure. This document also gives requirements relating to safety, ergonomics, performance and
information supplied by the manufacturer, including marking and labelling.
The requirements and tests are based on everyday use of walking frames as assistive products for
walking for a maximum user mass as specified by the manufacturer. This document includes walking
frames specified for a user mass of no less than 35 kg.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24415-1:2009(Main)
Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips (ISO 24415-1:2009)
EN ISO 24415-1:2009

This part of ISO 24415 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. This part of ISO 24415 is not applicable to tips manufactured for special purposes. The requirements and test method are based on a usage of tips for ordinary gait on the dry and flat walking surface.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11334-1:2007(Main)
Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007)
EN ISO 11334-1:2007

This part of ISO 11334 specifies requirements and test methods for elbow crutches fully equipped with handgrip and tip. The methods specify testing of separation, static load capacity, fatigue and resistance to low temperature embrittlement. This part of ISO 11334 also gives the requirements relating to safety, ergonomics, performance, and information to be supplied by the manufacturer, including marking and labelling. The requirements and tests are based on every-day usage of elbow crutches when performing the throughswing gait, for a maximum user mass as specified by the manufacturer. This part of ISO 11334 is applicable to elbow crutches specified for a user mass of not less than 35 kg. Requirements and test methods for friction of rubber tips against the walking surface are dealt with separately.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22523:2007(Main)
External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006)
EN ISO 22523:2006

This International Standard specifies requirements and test me  thods for external limb prostheses and external orthoses, incl  uding the following classifications from ISO 9999: 06 03;06 15  Orthoses 06 18;06 27 Limb prostheses It covers strength,  mate rials, restrictions on use, risk and the provision of  informat ion associated with the normal conditions of use of  both compo nents and assemblies of components.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11199-2:2005(Main)
Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005)
EN ISO 11199-2:2005

To include requirements and test methods for brakes, fit of rubber tips and handgrips, strength of resting seats, secure locking of mechanisms, safe allowable handle adjustment and safety for the user when ancillary equipment is added.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11199-3:2005(Main)
Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005)
EN ISO 11199-3:2005

ISO 11199-3:2005 specifies requirements and methods of testing the static stability, braking capabilities, static strength and fatigue of walking tables without accessory equipment, unless specified in the particular test procedure. It also gives requirements relating to safety, ergonomics and performance, marking, labelling and information supplied by the manufacturer.
ISO 11199-3:2005 includes all walking tables with three or more wheels or tips against the walking surface and having arm supports in the shape of a horizontal supporting table or two horizontal forearm supports.
The requirements and tests are based on everyday usage of walking tables as walking aids, for a maximum user mass as specified by the manufacturer.
ISO 11199-3:2005 includes walking tables specified for a user mass of not less than 35 kg.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day