SIST EN 13952:2003/A1:2006
(Amendment)LPG equipment and accessories - Filling procedures for LPG cylinders
LPG equipment and accessories - Filling procedures for LPG cylinders
The purpose of this amendment is to deal with static electricity and quality of product.
Flüssiggas-Geräte und Ausrüstungsteile - Füllverfahren für Flüssiggas (LPG)-Flaschen
Equipements pour gaz de pétrole liquéfiés et leurs accessoires - Procédures d'emplissage des bouteilles de GPL
Oprema in pribor za UNP – Jeklenke za utekočinjeni naftni plin (UNP) – Postopek polnjenja jeklenk za UNP
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13952:2003/A1:2006
01-maj-2006
2SUHPDLQSULERU]D813±-HNOHQNH]DXWHNRþLQMHQLQDIWQLSOLQ813±3RVWRSHN
SROQMHQMDMHNOHQN]D813
LPG equipment and accessories - Filling procedures for LPG cylinders
Flüssiggas-Geräte und Ausrüstungsteile - Füllverfahren für Flüssiggas (LPG)-Flaschen
Equipements pour gaz de pétrole liquéfiés et leurs accessoires - Procédures
d'emplissage des bouteilles de GPL
Ta slovenski standard je istoveten z: EN 13952:2003/A1:2006
ICS:
23.020.35 Plinske jeklenke Gas cylinders
SIST EN 13952:2003/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13952:2003/A1:2006
---------------------- Page: 2 ----------------------
SIST EN 13952:2003/A1:2006
EUROPEAN STANDARD
EN 13952:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 23.020.30
English Version
LPG equipment and accessories - Filling procedures for LPG
cylinders
Equipements pour gaz de pétrole liquéfiés et leurs Flüssiggas-Geräte und Ausrüstungsteile - Füllverfahren für
accessoires - Procédures d'emplissage des bouteilles de Flüssiggas (LPG)-Flaschen
GPL
This amendment A1 modifies the European Standard EN 13952:2003; it was approved by CEN on 20 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13952:2003/A1:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13952:2003/A1:2006
EN 13952:2003/A1:2006 (E)
Contents Page
Foreword.3
1 General modifications.4
2 Modification to title.4
3 Modification to Foreword.4
4 Modification to Clause 2 .4
5 Modification to 4.3 .4
6 Modification to 5.1 .5
7 Modification to the Bibliography.5
2
---------------------- Page: 4 ----------------------
SIST EN 13952:2003/A1:2006
EN 13952:2003/A1:2006 (E)
Foreword
This European Standard (EN 13952:2003/A1:2006) has been prepared by Technical Committee CEN/TC 286
“Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by NSAI.
This Amendment to the European Standard EN 13952:2003 shall be given the status of a national standard,
either by publication of an identical text
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.