SIST-TS CEN/TS 17332:2019
(Main)Construction products - Assessment of release of dangerous substances - Analysis of organic substances in eluates
Construction products - Assessment of release of dangerous substances - Analysis of organic substances in eluates
This Technical Specification specifies existing methods for the determination of non-volatile organic substances in aqueous eluates for the quantification of release from construction products.
Covered substances are phenols, PAH, PCB, phthalates, PBDE, organotin, dioxin and furans, biocides and plant protection products.
The selection of the method to be applied is based on the product matrix and the required sensitivity.
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von nichtflüchtigen organischen Stoffen in Eluaten
Dieses Dokument legt vorhandene Verfahren zur Bestimmung spezifischer organischer Stoffe in wässrigen Eluaten fest, die durch die Auslaugung von Bauprodukten gewonnen wurden.
Die folgenden Parameter sind abgedeckt: pH, elektrische Leitfähigkeit, Biozide, Bisphenol A, BTEX, Dioxine und Furane, DOC, Epichlorhydrin, Mineralöl, Nonylphenole, PAK, PBDE, PCB, dioxinähnliche PCB, PCP, Phenole und Phthalate.
ANMERKUNG 1 Noch in der Entwicklung befindliche Verfahren oder solche, die ausschließlich auf nationaler Ebene vorhanden sind, sind für bestimmte Amine, AOX und Biozid- und Pflanzenschutzmittel in Anhang B aufgeführt.
ANMERKUNG 2 Verfahren, die für durch Auslaugung aus Bauprodukten gewonnene wässrige Eluate nicht validiert wurden, da zum Zeitpunkt der Robustheitsvalidierung kein geeignetes Material verfügbar war, sind lediglich in Anhang B aufgeführt. Dies betrifft Organozinnverbindungen.
Die Verfahren in diesem Dokument stammen aus unterschiedlichen Bereichen, hauptsächlich der Wasser-analyse, und sind für Eluate aus Bauprodukten anwendbar. Sie sind für die Eluate der in Anhang A aufge-führten Produkttypen validiert.
ANMERKUNG 3 Zu Bauprodukten zählen unter anderem mineralische Produkte, bituminöse Produkte, Holzprodukte, Polymerprodukte und Metalle. Dieses Dokument enthält analytische Verfahren für alle Matrizen mit Ausnahme von Metallen.
Die Auswahl des anzuwendenden Verfahrens basiert auf der Produktmatrix und der erforderlichen Empfindlichkeit.
Produits de construction - Evaluation de l'émission de substances dangereuses - Analyse des substances organiques contenues dans les éluats
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza organskih snovi v izlužkih
Ta tehnična specifikacija določa obstoječe metode za določanje nehlapnih organskih snovi v vodnih izlužkih za kvantifikacijo sproščanja iz gradbenih proizvodov. Zajema naslednje substance: fenoli, PAH, PCB, ftalati, PBDE, organokositrove spojine, dioksini in furani, biocidi in izdelki za zaščito rastlin. Izbira uporabljene metode temelji na matrici izdelka in zahtevani občutljivosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17332:2019
01-julij-2019
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza organskih
snovi v izlužkih
Construction products - Assessment of release of dangerous substances - Analysis of
organic substances in eluates
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von
nichtflüchtigen organischen Stoffen in Eluaten
Produits de construction - Evaluation de l'émission de substances dangereuses -
Analyse des substances organiques contenues dans les éluats
Ta slovenski standard je istoveten z: CEN/TS 17332:2019
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST-TS CEN/TS 17332:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17332:2019
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17332:2019
CEN/TS 17332
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
May 2019
TECHNISCHE SPEZIFIKATION
ICS 91.100.01
English Version
Construction products: Assessment of release of
dangerous substances - Analysis of organic substances in
eluates
Produits de construction: Evaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Analyse des substances gefährlichen Stoffen - Analyse von organischen Stoffen
organiques contenues dans les éluats in Eluaten
This Technical Specification (CEN/TS) was approved by CEN on 11 February 2019 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17332:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17332:2019
CEN/TS 17332:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 8
5 Sample preparation . 8
6 Blank determination . 9
7 Interferences . 9
8 Selection of the suitable test method . 9
9 Expression of results .
...
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17332:2018
01-december-2018
*UDGEHQLSURL]YRGL2FHQMHYDQMHVSURãþDQMDQHYDUQLKVQRYL$QDOL]DRUJDQVNLK
VQRYLYHOXDWLK
Construction products - Assessment of release of dangerous substances - Analysis of
organic substances in eluates
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von
nichtflüchtigen organischen Stoffen in Eluaten
Produits de construction: Evaluation de l'émission de substances dangereuses - Analyse
des substances organiques contenues dans les éluats
Ta slovenski standard je istoveten z: FprCEN/TS 17332
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
kSIST-TS FprCEN/TS 17332:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17332:2018
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17332:2018
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17332
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2018
ICS 91.100.01
English Version
Construction products: Assessment of release of
dangerous substances - Analysis of organic substances in
eluates
Produits de construction: Evaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Analyse des substances gefährlichen Stoffen - Analyse von nichtflüchtigen
organiques contenues dans les éluats organischen Stoffen in Eluaten
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 351.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17332:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17332:2018
FprCEN/TS 17332:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 8
5 Sample preparation . 8
6 Blank determination . 9
7 Interferences . 9
8 Selection of the suitable test method . 9
9 Expression of results . 12
10 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.