SIST EN 17195:2024
(Main)Construction products - Assessment of release of dangerous substances - Analysis of inorganic substances in eluates
Construction products - Assessment of release of dangerous substances - Analysis of inorganic substances in eluates
This European Standard specifies analytical methods for the determination of major, minor and trace elements and of anions in aqueous eluates from construction products. It refers to the following 67 elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rubidium (Rb), rhenium (Re), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulphur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr) and to the following four anions: Cl-, Br-, F-, SO42-.
This document also describes how to measure general parameters like pH, electrical conductivity, DOC/TOC.
The methods in this European Standard are applicable to construction products.
NOTE Construction products include e.g. mineral-based products (S); bituminous products (B); metals (M); wood-based products (W); plastics and rubbers (P); sealants and adhesives (A); paints and coatings (C), see also CEN/TR 16045.
The selection of analytical methods to be applied is based on the required sensitivity of the method, which is provided for all substance – analytical procedure combinations.
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von anorganischen Stoffen in Eluaten
Dieses Dokument legt Analyseverfahren für die Bestimmung von Haupt, Neben und Spurenelementen sowie von Anionen in wässrigen Eluaten von Bauprodukten fest. Sie bezieht sich auf die folgenden 67 Elemente:
Aluminium (Al), Antimon (Sb), Arsen (As), Barium (Ba), Beryllium (Be), Bismut (Bi), Blei (Pb), Bor (B), Cadmium (Cd), Calcium (Ca), Cer (Ce), Cäsium (Cs), Chrom (Cr), Cobalt (Co), Dysprosium (Dy), Eisen (Fe), Erbium (Er), Europium (Eu), Gadolinium (Gd), Gallium (Ga), Germanium (Ge), Gold (Au), Hafnium (Hf), Holmium (Ho), Indium (In), Iridium (Ir), Kalium (K), Kupfer (Cu), Lanthan (La), Lithium (Li), Lutetium (Lu), Magnesium (Mg), Mangan (Mn), Molybdän (Mo), Natrium (Na), Neodym (Nd), Nickel (Ni), Palladium (Pd), Phosphor (P), Platin (Pt), Praseodym (Pr), Quecksilber (Hg), Rhenium (Re), Rhodium (Rh), Rubidium (Rb), Ruthenium (Ru), Samarium (Sm), Scandium (Sc), Schwefel (S), Selen (Se), Silicium (Si), Silber (Ag), Strontium (Sr), Tellur (Te), Terbium (Tb), Thallium (Tl), Thorium (Th), Thulium (Tm), Titan (Ti), Uran (U), Vanadium (V), Wolfram (W), Ytterbium (Yb), Yttrium (Y), Zink (Zn), Zinn (Sn) und Zirconium (Zr) sowie auf die folgenden vier Anionen: Cl−, Br−, F−, SO42−.
Dieses Dokument legt außerdem fest, wie allgemeine Parameter, wie pH-Werte, elektrische Leitfähigkeit, DOC/TOC gemessen werden.
Die in diesem Dokument beschriebenen Verfahren sind für Bauprodukte geeignet.
ANMERKUNG Bauprodukte umfassen z. B. mineralische Produkte (S), bituminöse Produkte (B), Metalle (M), Holzprodukte (W), Kunststoffe und Gummi (P), Dichtstoffe und Kleber (A), Farben und Beschichtungen (C), siehe auch CEN/TR 16045.
Die Auswahl der zu verwendenden Analyseverfahren beruht auf der erforderlichen Sensitivität des Verfahrens, die für jede Stoff-Analysenverfahren-Kombination angegeben wird.
Produits de construction - Évaluation du relargage de substances dangereuses - Analyse des substances inorganiques dans les éluats
Le présent document spécifie les méthodes d’analyse pour la détermination d’éléments majeurs, mineurs et en traces ainsi que d’anions dans les éluats aqueux de produits de construction. Il concerne les 67 éléments suivants :
aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), béryllium (Be), bismuth (Bi), bore (B), cadmium (Cd), calcium (Ca), cérium (Ce), césium (Cs), chrome (Cr), cobalt (Co), cuivre (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), or (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), fer (Fe), lanthane (La), plomb (Pb), lithium (Li), lutécium (Lu), magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène(Mo), néodyme(Nd), nickel (Ni), palladium (Pd), phosphore(P), platine (Pt), potassium (K), praséodyme (Pr), rubidium (Rb), rhénium (Re), rhodium (Rh), ruthénium (Ru), samarium (Sm), scandium (Sc), sélénium (Se), silicium (Si), argent (Ag), sodium (Na), strontium (Sr), soufre (S), tellure (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), étain (Sn), titane (Ti), tungstène (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn) et zirconium (Zr), ainsi que les quatre anions suivants : Cl-, Br-, F-, SO42-.
Le présent document décrit également la manière dont des paramètres généraux tels que le pH, la conductivité électrique ou le COD/COT sont mesurés.
Les méthodes décrites dans le présent document s’appliquent aux produits de construction.
NOTE Les produits de construction comprennent, par exemple, les produits à base minérale (S), les produits bitumineux (B), les métaux (M), les produits à base de bois (W), les plastiques et caoutchoucs (P), les matériaux d’étanchéité et adhésifs (A), les peintures et revêtements (C) ; voir également le CEN/TR 16045.
Le choix des méthodes d’analyse à appliquer dépend de la sensibilité requise de chacune de ces méthodes, sensibilité donnée pour toutes les combinaisons substance - mode opératoire analytique.
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza anorganskih snovi v izlužkih
Ta evropski standard določa analitične metode za določanje glavnih in stranskih elementov in elementov v sledovih in anionov v vodnih izlužkih iz gradbenih proizvodov. Sklicuje se na naslednjih 67 elementov:
aluminij (Al), antimon (Sb), arzen (As), barij (Ba), berilij (Be), bizmut (Bi), bor (B), kadmij (Cd), kalcij (Ca), cerij (Ce), cezij (Cs), krom (Cr), kobalt (Co), baker (Cu), disprozij (Dy), erbij (Er), evropij (Eu), gadolinij (Gd), galij (Ga), germanij (Ge), zlato (Au), hafnij (Hf), holmij (Ho), indij (In), iridij (Ir), železo (Fe), lantan (La), svinec (Pb), litij (Li), lutecij (Lu), magnezij (Mg), mangan (Mn), živo srebro (Hg), molibden (Mo), neodim (Nd), nikelj (Ni), paladij (Pd), fosfor (P), platina (Pt), kalij (K), prazeodim (Pr), rubidij (Rb), renij (Re), rodij (Rh), rutenij (Ru), samarij (Sm), skandij (Sc), selen (Se), silicij (Si), srebro (Ag), natrij (Na), stroncij (Sr), žveplo (S), telurij (Te), terbij (Tb), talij (Tl), torij (Th), tulij (Tm), kositer (Sn), titan (Ti), volfram (W), uran (U), vanadij (V), iterbij (Yb), itrij (Y), cink (Zn) in cirkonij (Zr) in na naslednje štiri anione: Cl-, Br-, F-, SO42-.
Ta dokument opisuje tudi način merjenja splošnih parametrov, kot so pH, električna prevodnost, DOC/TOC.
Metode iz tega evropskega standarda veljajo za gradbene proizvode.
OPOMBA: Gradbeni proizvodi vključujejo npr. mineralne proizvode (S); bitumenske proizvode (B); kovine (M); lesne proizvode (W); plastične mase in gume (P); tesnila in lepila (A); barve in premaze (C), glej tudi CEN/TR 16045.
Izbira analitskih metod, ki se uporabljajo, temelji na zahtevani občutljivosti metode, ki je zagotovljena za vse kombinacije snovi in analitskega postopka.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17195:2024
01-april-2024
Nadomešča:
SIST-TS CEN/TS 17195:2019
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza
anorganskih snovi v izlužkih
Construction products - Assessment of release of dangerous substances - Analysis of
inorganic substances in eluates
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von
anorganischen Stoffen in Eluaten
Produits de construction - Évaluation du relargage de substances dangereuses -
Analyse des substances inorganiques dans les éluats
Ta slovenski standard je istoveten z: EN 17195:2023
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST EN 17195:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17195:2024
---------------------- Page: 2 ----------------------
SIST EN 17195:2024
EN 17195
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.100.01 Supersedes CEN/TS 17195:2018
English Version
Construction products: Assessment of release of
dangerous substances - Analysis of inorganic substances in
eluates
Produits de construction - Évaluation du relargage de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Analyse des substances gefährlichen Stoffen - Analyse von anorganischen
inorganiques dans les éluats Stoffen in Eluaten
This European Standard was approved by CEN on 14 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17195:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17195:2024
EN 17195:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
2 Scope . 5
3 Normative references . 5
4 Terms and definitions . 6
5 Abbreviations . 8
6 Sample pre-treatment . 8
7 Selection of suitable analytical test method . 9
7.1 Table of test methods . 9
7.2 General validation information . 9
8 Method performance . 11
9 Expression of results .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.