SIST EN 12082:2017/kFprA1:2021

SLOVENSKI STANDARD
SIST EN 12082:2017/oprA1:2019
01-april-2019
Železniške naprave - Ohišja ležajev kolesnih dvojic - Preskušanje delovanja -
Dopolnilo A1
Railway applications - Axleboxes - Performance testing
Bahnanwendungen - Radsatzlager - Prüfung des Leistungsvermögens
Applications ferroviaires - Boïtes d'essieux - Essais de performance
Ta slovenski standard je istoveten z: EN 12082:2017/prA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 12082:2017/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12082:2017/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN 12082:2017/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 12082:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
February 2019
ICS 45.040
English Version

Railway applications - Axleboxes - Performance testing
Applications ferroviaires - Boïtes d'essieux - Essais de Bahnanwendungen - Radsatzlager - Prüfung des
performance Leistungsvermögens
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 12082:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12082:2017/prA1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12082:2017/oprA1:2019
EN 12082:2017/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2, Normative references . 4
2 Modifications to Clause 3, Terms and definitions . 4
3 Modifications to Clause 4, Symbols and abbreviations . 4
4 Modifications to subclause 7.1, Rig performance test – General . 4
5 Modifications to subclause 7.3.1, Pre-test . 4
6 Modifications to subclause 7.3.2, Performance test . 4
7 Modifications to subclause 7.4.1, Results obtained during test . 5
8 Modifications to subclause 7.5, Performance test report . 5
9 Modifications to subclause 8.1, Field test – General . 5
10 Modifications to Annex A.3, Grease sampling zones . 5
11 Modifications to Annex A.5.2, Conditions for sequenced tests . 6
12 Modifications to Annex A.6, Graphical presentation of test cycles . 6
13 Modifications to Annex A.7, Temperature criteria . 6
14 Modifications to Annex A.8.2, Physico-chemical criteria . 6
15 Modifications to Annex A.9.2, Preconditions for applicability of existing results . 6

2

---------------------- Page: 4 ----------------------

SIST EN 12082:2017/oprA1:2019
EN 12082:2017/prA1:2019 (E)
European foreword
This document (EN 12082:2017/prA1:2019) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of
EN 12082:2017.
3

---------------------- Page: 5 ----------------------

SIST EN 12082:2017/oprA1:2019
EN 12082:2017/prA1:2019 (E)
1 Modification to Clause 2, Normative references
Replace the current reference EN 12081:2007+A1:2010 with:
“EN 12081:2017”.
2 Modifications to Clause 3, Terms and definitions
In 3.9.1, delete the “<” sign before the definition.
3 Modifications to Clause 4, Symbols and abbreviations
Replace the existing description of n w
...