iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1087-1:1996

(Main)

Particleboards - Determination of moisture resistance - Part 1: Boil test

Particleboards - Determination of moisture resistance - Part 1: Boil test

This European Standard specifies a method of test for evaluating the bond quality of particleboards, intended for use in humid conditions according to option 2 of prEN 312-5 and prEN 312-7.

Spanplatten - Bestimmung der Feuchtbeständigkeit - Teil 1: Kochprüfung

Diese Europäische Norm legt ein Prüfverfahren zur Bewertung der Qualität der Verklebung von Spanplatten fest, die für die Verwendung im Feuchtbereich nach Option 2 von EN 312-5 und EN 312-7 vorgesehen sind.

Panneaux de particules - Détermination de la résistance a l'humidité - Partie 1: Essai a l'eau bouillante

La présente norme européenne prescrit une méthode d'essai pour l'évaluation de la qualité de collage des panneaux de particules utilisés en milieux humides selon l'option 2 de EN 312 et EN 312-7.

Iverne plošče - Ugotavljanje odpornosti proti vlagi - Preskus z vrenjem

General Information

Status
Published
Publication Date
29-Feb-1996
ICS
79.060.20 - Fibre and particle boards
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-1996
Due Date
01-Mar-1996
Completion Date
01-Mar-1996
Directive
89/106/EEC - Construction products
Mandate
M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
Ref Project
EN 1087-1:1995 - Particleboards - Determination of moisture resistance - Part 1: Boil test

Buy Standard

EN 1087-1:1996EN 1087-1:1996
PreviousNext
Standard
EN 1087-1:1996
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHQMHPSpanplatten - Bestimmung der Feuchtbeständigkeit - Teil 1: KochprüfungPanneaux de particules - Détermination de la résistance a l'humidité - Partie 1: Essai a l'eau bouillanteParticleboards - Determination of moisture resistanc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14323:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Test methods
EN 14323:2021

This document specifies test methods for the determination of characteristics of melamine faced boards (MFB) as defined in EN 14322.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14322:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
EN 14322:2021

This document specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.
This document does not apply to boards laminated with so called priming foils or finish foils and laminates according to EN 438 1.
This document does not apply to laminate floor coverings.
Melamine faced wood-based boards in accordance with this document can be referred to as MFB.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-4:2019(Main)
Fibreboards - Specifications - Part 4: Requirements for softboards
EN 622-4:2019

This document specifies the requirements for softboards as defined in EN 316, with a density ≥ 230 kg/m3 to 400 kg/m3.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16368:2014(Main)
Lightweight Particleboards - Specifications
CEN/TS 16368:2014

CEN/TS 16368 specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3. This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards. This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 320:2011(Main)
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
EN 320:2011

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 312:2011(Main)
Particleboards - Specifications
EN 312:2010

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309. The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations. Additional information on supplementary properties for certain applications is also given. This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-5:2010(Main)
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 622-5:2009

This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 316:2009(Main)
Wood fibre boards - Definition, classification and symbols
EN 316:2009

This European Standard gives the definition, classification and symbols for wood fibreboards.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 634-2:2007(Main)
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 634-2:2007

This European Standard for cement-bonded particleboards specifies the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid ) and external ) conditions. Additional information on supplementary properties for certain applications is also given.
NOTE 1   Boards made with cement other than OPC may comply with this Standard if test values are declared according to EN 13986. However, further parts of EN 634 may be developed in the future to cover other types of cement or other materials.
NOTE 2   Cement-bonded particleboard does not contain any asbestos fibre.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300:2006(Main)
Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 300:2006

This European Standard applies to Oriented Strand Boards (OSB). It defines terms, establishes a
classification and specifies requirements.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Test methods for determination of mechanical properties for structural purposes are given in EN 789.
Determination of characteristic values of mechanical properties and density for structural purposes is given in EN 1058. Design characteristic values for OSB are given in EN 12369-1.
Information on supplementary properties is given in Annex C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day