oSIST prEN 13880-11:2024

SLOVENSKI STANDARD
01-december-2024
Toplo nanosljive tesnilne mase za stike – 11. del: Preskusna metoda za pripravo
preskusnih asfaltnih blokov za preskuse funkcionalnosti in za ugotavljanje
združljivosti z asfaltnimi vozišči
Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test
blocks used in the function test and for the determination of compatibility with asphalt
pavements
Heiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-
Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der
Verträglichkeit mit Asphalten
Produits de scellement de joints appliqués à chaud - Partie 11 : Méthode d'essai pour la
préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de
compatibilité avec les revêtements bitumineux
Ta slovenski standard je istoveten z: prEN 13880-11
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2024
ICS 93.080.20 Will supersede EN 13880-11:2003
English Version
Hot applied joint sealants - Part 11: Test method for the
preparation of asphalt test blocks used in the function test
and for the determination of compatibility with asphalt
pavements
Produits de scellement de joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 11:
Partie 11 : Méthode d'essai pour la préparation des Prüfverfahren zur Herstellung von Asphalt-
blocs d'enrobés destinés au test fonctionnel et pour la Probekörpern zur Verwendung in der
détermination de compatibilité avec les revêtements Funktionsprüfung und zur Bestimmung der
bitumineux Verträglichkeit mit Asphalten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13880-11:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Asphalt . 5
7 Preparation and conditioning of test material . 5
8 Preparation of asphalt for test blocks . 5
9 Preparation of the test blocks . 5
10 Storage . 5
11 Report for asphalt blocks preparing . 6
European foreword
This document (prEN 13880-11:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13880-11:2003.
EN 13880-11:2003:
— revision of Clause 5 Asphalt, clarifying the preparation of hot mixed asphalt (from laborat
...