SIST EN ISO 1797-1:2011

SLOVENSKI STANDARD
SIST EN ISO 1797-1:2011
01-december-2011
1DGRPHãþD
SIST EN ISO 1797-1:2000
SIST EN ISO 1797-1:2000/A1:2000
Zobozdravstvo - Tulci za vrtilne instrumente - 1. del: Kovinski tulci (ISO 1797-
1:2011)
Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-
1:2011)
Zahnheilkunde - Schäfte für rotierende Instrumente - Teil 1: Schäfte aus Metall (ISO
1797-1:2011)
Médecine bucco-dentaire - Queues pour instruments rotatifs - Partie 1: Queues en
matériaux métalliques (ISO 1797-1:2011)
Ta slovenski standard je istoveten z: EN ISO 1797-1:2011
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 1797-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1797-1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 1797-1:2011


EUROPEAN STANDARD
EN ISO 1797-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 11.060.20 Supersedes EN ISO 1797-1:1995
English Version
Dentistry - Shanks for rotary instruments - Part 1: Shanks made
of metals (ISO 1797-1:2011)
Médecine bucco-dentaire - Queues pour instruments Zahnheilkunde - Schäfte für rotierende Instrumente - Teil 1:
rotatifs - Partie 1: Queues en matériaux métalliques (ISO Schäfte aus Metall (ISO 1797-1:2011)
1797-1:2011)
This European Standard was approved by CEN on 14 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1797-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1797-1:2011
EN ISO 1797-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1797-1:2011
EN ISO 1797-1:2011 (E)
Foreword
This document (EN ISO 1797-1:2011) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1797-1:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1797-1:2011 has been approved by CEN as a EN ISO 1797-1:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1797-1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 1797-1:2011

INTERNATIONAL ISO
STANDARD 1797-1
Second edition
2011-08-15

Dentistry — Shanks for rotary
instruments —
Part 1:
Shanks made of metals
Médecine bucco-dentaire — Queues pour instruments rotatifs —
Partie 1: Queues en matériaux métalliques




Reference number
ISO 1797-1:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 1797-1:2011
ISO 1797-1:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1797-1:2011
ISO 1797-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1797-1 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
This second edition cancels and replaces the first edition (ISO 1797-1:1992) and ISO 1797-1:1992/
Amd.1:1997, which has been technically revised. The following changes were made:
a) addition of a maximum value for the end of the shank for Type 3;
b) addition of a definition for shank;
c) clarification of symbols and figures.
ISO 1797 consists of the following parts, under the general title Dentistry — Shanks for rotary instruments:
 Part 1: Shanks made of metals
 Part 2: Shanks made of plastics
© ISO 2011 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 1797-1:2011
ISO 1797-1:2011(E)
Introduction
This International Standard is one of a series of basic standards on dental rotary instruments. It constitutes an
important link between the standards on dental
...