oSIST prEN ISO 19109:2024

SLOVENSKI STANDARD
01-september-2024
Geografske informacije - Osnovni podatkovni model in pravila za aplikacijsko
shemo (ISO/DIS 19109:2024)
Geographic information - General feature model and rules for application schema
(ISO/DIS 19109:2024)
Geoinformationen - Grundlegendes Datenmodell und Regeln zur Erstellung von
Anwendungsschemata (ISO/DIS 19109:2024)
Information géographique - Modèle général des entités et règles relatives au schéma
d'application (ISO/DIS 19109:2024)
Ta slovenski standard je istoveten z: prEN ISO 19109
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 19109
ISO/TC 211
Geographic information — General
Secretariat: SIS
feature model and rules for
Voting begins on:
application schema
2024-06-19
ICS: 35.240.70
Voting terminates on:
2024-09-11
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 19109:2024(en)
DRAFT
ISO/DIS 19109:2024(en)
International
Standard
ISO/DIS 19109
ISO/TC 211
Geographic information — General
Secretariat: SIS
feature model and rules for
Voting begins on:
application schema
ICS: 35.240.70
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 19109:2024(en)
ii
ISO/DIS 19109:2024(en)
ISO 19109:####(X)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Conformance . 4
4.1 General . 4
4.2 Meta-Model . 5
4.3 Spatial . 5
4.4 Temporal . 5
4.5 Quality . 5
4.6 Spatial referencing by identifiers . 5
4.7 Coverages . 5
4.8 Observations . 6
4.9 UML application schema . 6
4.10 Spatial attributes in UML . 6
4.11 Temporal attributes in UML . 6
4.12 Quality attributes in UML . 6
4.13 Metadata . 7
4.14 Profiling standard schema . 7
5 Presentation and abbreviations . 7
5.1 Presentation . 7
5.2 Abbreviations . 9
5.3 Package abbreviations . 9
6 Context . 9
6.1 Purpose of an application schema . 9
6.2 Rationale for defining the rules for application schemas . 10
6.3 Application schemas supporting data interchange. 10
7 General Feature Model . 12
7.1 Principle for defining features . 12
7.2 The Concept of the General Feature Model . 14
7.3 Conceptual Schema of the General Feature Model . 16
7.4 Attributes of feature types . 23
7.5 Relationships between feature types . 24
7.6 Constraints . 26
8 Rules for application schemas . 26
8.1 The application modelling process . 26
8.2 General rules for application schemas . 28
8.3 Rules for use of spatial schemas. 31
8.4 Rules for use of temporal schemas. 40
8.5 Rules for use of quality schemas . 42
8.6 Rules for use of geographic identifiers . 44
8.7 Rules for use of metadata schemas . 46
8.8 Rules for use of coverage functions . 46
8.9 Rules for the use of observations . 49
8.10 Rules for application schemas in UML . 51
iii
ISO/DIS 19109:2024(en)
ISO 19109:####(X)
8.11 Domain profiles of standard schemas in UML . 69
Annex A (normative) Abstract test suite . 73
Annex B (informative) The modelling approach and the General Feature Model . 85
Annex C (informative) Application schema examples . 88
Annex D (informative) Backward compatibility . 94
Bibliography . 99

iv
ISO/DIS 19109:2024(en)
ISO 19109:####(X)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO [had/had not]
received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics,
in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 287, Geographic Information, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 19109:2015), which has been technically
revised.
The main changes are as follows:
— Changes in the title and scope
— New sub-clauses discussing the concept of the General Feature Model
— Re-organization of Clause 7 to include only concepts of the General Feature Model and moving
the general rules for application schema to Clause 8
— Updating the dependencies to other
...