SIST EN 994:2012

SLOVENSKI STANDARD
SIST EN 994:2012
01-marec-2012
1DGRPHãþD
SIST EN 994:1999
7HNVWLOQHWDOQHREORJH8JRWDYOMDQMHVWUDQVNHGROåLQHUDYQRVWLURERYLQ
SUDYRNRWQRVWLSORãþ
Textile floor coverings - Determination of the side length, squareness and straightness of
tiles
Textile Bodenbeläge - Bestimmung der Länge und Geradheit der Kanten und der
Rechtwinkligkeit von Fliesen
Revêtements de sol textiles - Détermination de la longueur des arêtes, de l'équerrage et
de la rectitude des dalles
Ta slovenski standard je istoveten z: EN 994:2012
ICS:
59.080.60 Tekstilne talne obloge Textile floor coverings
SIST EN 994:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 994:2012

---------------------- Page: 2 ----------------------

SIST EN 994:2012


EUROPEAN STANDARD
EN 994

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2012
ICS 59.080.60 Supersedes EN 994:1995
English Version
Textile floor coverings - Determination of the side length,
squareness and straightness of tiles
Revêtements de sol textiles - Détermination de la longueur Textile Bodenbeläge - Bestimmung der Länge und
des arêtes, de l'équerrage et de la rectitude des dalles Geradheit der Kanten und der Rechtwinkligkeit von Fliesen
This European Standard was approved by CEN on 20 November 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 994:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 994:2012
EN 994:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Principle .4
4 Apparatus .4
4.1 Length .4
4.1.1 Measurement device .4
4.1.2 Support plate .4
4.1.3 Rigid plate .4
4.2 Squareness .4
4.2.1 Precision square .4
4.2.2 Flat surface .5
4.2.3 Rigid plate .5
4.2.4 Shims .5
5 Sampling and preparation of test specimens .5
6 Conditioning .5
7 Test method .5
7.1 Length .5
7.2 Squareness and straightness .5
8 Calculation and expression of results .7
8.1 Length .7
8.2 Straightness and squareness .7
9 Test report .7

2

---------------------- Page: 4 ----------------------

SIST EN 994:2012
EN 994:2012 (E)
Foreword
This document (EN 994:2012) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and
laminate floor coverings”, the secretariat of which is held by BSI.
This European Standard shal
...