SIST EN 755-2:2025

SLOVENSKI STANDARD
01-september-2025
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 755-2:2025
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 755-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2025
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 755-2:2016
English Version
Aluminium and aluminium alloys - Extruded rod/bar, tube
and profiles - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen -
profilés filés - Partie 2 : Caractéristiques mécaniques Stranggepresste Stangen, Rohre und Profile - Teil 2:
Mechanische Eigenschaften
This European Standard was approved by CEN on 26 August 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-2:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Mechanical property limits . 7
4.1 General . 7
4.2 Elongation . 7
4.3 Tables of mechanical properties . 8
Table 1 — Aluminium EN AW-1050A [Al 99,5(A)]. 8
Table 2 — Aluminium EN AW-1070A [Al 99,7(A)]. 9
Table 3 — Aluminium EN AW-1200 [Al 99,0] . 9
Table 4 — Aluminium EN AW-1350 [Al 99,5] . 10
Table 5 — Alloy EN AW-2007 [Al Cu4PbMgMn]. 11
Table 6 — Alloy EN AW-2011 [Al Cu6BiPb] . 12
Table 7 —Alloy EN AW-2011A [Al Cu6BiPb(A)] . 12
Table 8 — Alloy EN AW-2014 [Al Cu4SiMg] . 13
Table 9 —Alloy EN AW-2014A [Al Cu4SiMg(A)] . 14
Table 10 — Alloy EN AW-2017A [Al Cu4MgSi(A)] . 15
Table 11 — Alloy EN AW-2618A [Al Cu2Mg1.5Ni(A)] . 16
Table 12 — Alloy EN AW-2024 [Al Cu4Mg1] . 17
Table 13 — Alloy EN AW-2030 [Al Cu4PbMg] . 18
Table 14 — Alloy EN AW-2033 [Al Cu2,5MnSiMgBi] . 19
Table 15 — Alloy EN AW-2077 [Al Cu4,5MgMnSiBi] . 20
Table 16 — Alloy EN AW-3102 [Al Mn0,2] . 21
Table 17 — Alloy EN AW-3003 [Al Mn1Cu] . 22
Table 18 — Alloy EN AW-3103 [Al Mn1] . 23
Table 19— Alloy EN AW-4032 [Al Si12,5MgCuNi] . 23
Table 20 — Alloy EN AW-5005 [Al Mg1] . 24
Table 21 —Alloy EN AW-5005A [Al Mg1(A)] . 25
Table 22 — Alloy EN AW-5019 [Al Mg5] . 26
Table 23 — Alloy EN AW-5049 [Al Mg2Mn0,8] . 27
Table 24 — Alloy EN AW-5051A [Al Mg2(A)] . 28
Table 25 — Alloy EN AW-5251 [Al Mg2Mn0,3] . 29
Table 26 — Alloy EN AW-5052 [Al Mg2,5] . 30
Table 27 — Alloy EN AW-5154A [Al Mg3,5(A)] . 31
Table 28 — Alloy EN AW-5454 [Al Mg3Mn] . 32
Table 29 — Alloy EN AW-5754 [Al Mg3] . 33
Table 30 — Alloy EN AW-5083 [Al Mg4,5Mn0,7] . 34
Table 31 — Alloy EN AW-5086 [Al Mg4] . 35
Table 32 — Alloy EN AW-6101A [Al MgSi(A) . 36
Table 33 — Alloy EN AW-6101B [Al MgSi(B)] . 37
Table 34 — Alloy EN AW-6005 [Al SiMg] . 38
Table 35 — Alloy EN AW-6005A [Al SiMg(A)] . 39
Table 36 — Alloy EN AW-6106 [Al MgSiMn] . 40
Table 37 — Alloy EN AW-6008 [Al SiMgV] . 41
Table 38 — Alloy EN AW-6110A [Al Mg0,9Si0,9MnCu(A)] . 42
Table 39 — Alloy EN AW-6012 [Al MgSiPb] . 43
Table 40 — Alloy EN AW-6014 [Al Mg0,6SiV] . 44
Table 41 — Alloy EN AW-6018 [Al Mg1SiPbMn] . 45
Table 42 — Alloy EN AW-6023 [AlSi1Sn1MgBi] . 46
Table 43 — Alloy EN AW-6026 [Al MgSiBi] . 46
Table 44 — Alloy EN AW-6050 [Al Si1,5FeMgNi] . 47
Table 45 — Alloy EN AW-6351 [Al Si1Mg0,5Mn] . 47
Table 46 — Alloy EN AW-6056 [AlSi1MgCuMn] . 49
Table 47 — Alloy EN AW-6060 [Al MgSi] . 50
Table 48 — Alloy EN AW-6360 [Al SiMgMn] . 51
Table 49 — Alloy EN AW-6061 [Al Mg1SiCu] . 52
Table 50 — Alloy EN AW-6061A [Al Mg1SiCu(A)] . 53
Table 51 — Alloy EN AW-6261 [Al Mg1SiCuMn] . 53
Table 52 — Alloy EN AW-6262 [Al Mg1SiPb] . 54
Table 53 — Alloy EN AW-6262A [Al Mg1SiSn] . 55
Table 54 — Alloy EN AW-6063 [Al Mg0,7Si] . 55
Table 55 — Alloy EN AW-6063A [Al Mg0,7Si(A)] . 57
Table 56 — Alloy EN AW-6463 [Al Mg0,7Si(B)] . 58
Table 57 — Alloy EN AW-6064A [Al Mg1SiBi(A)] . 59
Table 58 — Alloy EN AW-6065 [Al Mg1Bi1Si] . 60
Table 59 — Alloy EN AW-6081 [Al Si0,9MgMn] . 61
Table 60 — Alloy EN AW-6082 [Al Si1MgMn] . 62
Table 61 — Alloy EN AW-6182 [Al Si1MgZr] . 63
Table 62 — Alloy EN AW-7003 [Al Zn6Mg0,8Zr] . 64
Table 63 — Alloy EN AW-7005 [Al Zn4,5Mg1,5Mn] . 65
Table 64 — Alloy EN AW-7108 [Al Zn5Mg1Zr] . 66
Table 65 — Alloy EN AW-7108A [Al Zn5Mg1Zr(A)] . 67
Table 66 — Alloy EN AW-7020 [Al Zn4,5Mg1] . 68
Table 67 — Alloy EN AW-7021 [Al Zn5,5Mg1,5] . 69
Table 68 — Alloy EN AW-7022 [Al Zn5Mg3Cu] . 70
Table 69 — Alloy EN AW-7049A [Al Zn8MgCu(A)] . 71
Table 70 — EN AW-7075 [Al Zn5,5MgCu] . 72
Annex A (informative) List of tempers used in Tables 1 to 70 (extract of EN 515) . 73
Bibliography . 75

European foreword
T
...