iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 746-1:2000

(Main)

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

1.1 This part of prEN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN 292-1:1991. It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards. This standard gives general principles and common requirements for the reduction of risks for equipments covered by the scope.

Industrielle Thermoprozeßanlagen - Teil 1: Allgemeine Sicherheitsanforderungen an industrielle Thermoprozeßanlagen

Dieser Teil der EN 746 spezifiziert die allgemeinen Sicherheitsanforderungen für industrielle Thermoprozessanlagen (z.B. Industrieöfen und industrielle Erwärmungsanlagen), die der Definition für Maschinen in EN 292-1:1991, ent- sprechen. Er nennt die vorhersehbaren bedeutenden Gefährdungen an industriellenThermoprozessanlagen und gibt die geeigneten vorbeugenden Massnahmen für die Verminderung oder Vermeidung dieser Gefährdungen an. Diese Norm gibt allgemeineGrundsätze und allgemeine Anforderungen für die Verminderung von Risiken an Anlagen, die diesem Anwendungsbereich entsprechen.

Equipements thermiques industriels - Partie 1: Prescriptions générales de sécurité pour les équipements thermiques industriels

Cette partie de la norme EN 746 spécifie les prescriptions générales de sécuritépour les équipements thermiques industriels (par exemple les fours industriels et les équipement de chauffage industriels) conformes a la définition de la ma- chine donnée dans l'EN 292-1:1991. Elle détaille les risques potentiels signi- ficatifs associés aux équipements thermique industriels et spécifie les mesures de prévention appropriées pour la diminution ou l'élimination de ces risques.

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
19-Aug-2009
ICS
25.180.01 - Industrial furnaces in general
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Aug-2009
Due Date
12-Sep-2009
Completion Date
20-Aug-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 746-1:1997 - Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

Relations

Consolidated By
SIST EN 746-1:2000+A1:2009 - Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
Effective Date
18-Jan-2023
Consolidated By
SIST EN 746-1:2000+A1:2009 - Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
Effective Date
19-Jan-2023
Amended By
SIST EN 746-1:2000/kprA1:2009 - Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
Effective Date
01-Apr-2009
Consolidated By
SIST EN 746-1:2000+A1:2009 - Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
Effective Date
01-Oct-2009

Buy Standard

EN 746-1:2000EN 746-1:2000
PreviousNext
Standard
EN 746-1:2000
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 746-1:2000
01-april-2000
Industrial thermoprocessing equipment - Part 1: Common safety requirements for
industrial thermoprocessing equipment
Industrial thermoprocessing equipment - Part 1: Common safety requirements for
industrial thermoprocessing equipment
Industrielle Thermoprozeßanlagen - Teil 1: Allgemeine Sicherheitsanforderungen an
industrielle Thermoprozeßanlagen
Equipements thermi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 13577-4:2022(Main)
Industrial furnaces and associated processing equipment - Safety - Part 4: Protective systems (ISO 13577-4:2022)
EN ISO 13577-4:2022

This part of ISO 13577 specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE).
The functional requirements to which the protective systems apply are specified in the other parts of ISO 13577.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 746-3:2022(Main)
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 746-3:2021

This part of EN 746 series specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE).
NOTE   The general safety requirements common to TPE are provided in EN 746  1 (see Introduction).
This part of EN 746 series deals with significant hazards, hazardous situations and events relevant to the generation and use of protective and reactive atmosphere gases created by thermochemical reactions and their use in TPE that are part of TPE as listed in Clause 4 and Clause 5, when used as intended and under the conditions foreseen by the manufacturer.
This part of EN 746 series covers
-   pipework downstream of and including the manual isolating valve,
-   equipment for the generation of atmosphere gases,
-   additional equipment for the use of atmosphere gases in TPE,
-   safety devices, and
-   functional requirements for safety related control system
for the generation and use of protective and reactive atmosphere gases.
It applies to the supply of atmosphere gas, source gas, inert gas and process liquids to TPE and their removal from TPE, confined to equipment integrated in the TPE.
This part of EN 746 series also details the anticipated significant hazards associated with atmosphere gas systems and their use in TPE and specifies the appropriate preventative measures for the reduction or elimination of these hazards.
The pressure hazard of the piping and components covered by this standard is within the maximum pressure/size relationship of group I as described in Annex C.
This part of EN 746 series
-   specifies the requirements to be met to ensure the safety of persons and property during installation, commissioning, start up, operation, shutdown and maintenance,
-   does not cover the relevant risks involved in the flue gas ducting system when it is not considered a part of TPE,
-   is not applicable to utility supply upstream of the TPE main disconnects,
-   does not apply to TPE for semi-conductor devices,
-   does not apply to TPE with atmosphere, such as air and flue gas from an over stoichiometric combustion,
-   does not cover the decommissioning of the TPE,
-   does not cover vacuum furnaces,
-   does not deal with the hazard of noise which is covered in EN 746-1:2019,
-   is not applicable to generation and use of atmosphere gas in TPE and associated plant which is manufactured before the date of its publication, and
-   gives the necessary requirements for the information for use.
A TPE designed according to this part of EN 746 series does not create any potentially explosive atmosphere in the area around the TPE and is not designed to be located in an area with a potentially explosive or hazardous atmosphere.
A table of typical protective and reactive gases is given in Annex B.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 746-2:2010(Main)
Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
EN 746-2:2010

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE). This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer. This European Standard covers:
- fuel pipework downstream of and including the manual isolating valve;
- burner(s), burner system and ignition device;
- safety related control system (protective system).
This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy. For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process. The pressure hazard of the piping and components covered by this standard is within the limits of maximum pressure/size relationship as described in normative Annex E. This European Standard also gives the necessary requirements for the information for use. This European Standard does not cover hazards from heating generated by electricity. This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE. NOTE EN 1539, Dryers and ovens, in which flammable substances are released — Safety requirements This European Standard is not applicable to combustion and fuel handling systems
- of welding and soldering machines;
- up-stream of the IThE manual isolating valve.
This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system. Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with in this standard. This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 746-1:2000+A1:2009(Main)
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-1:1997+A1:2009

1.1   This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003.
It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards.
This standard gives general principles and common requirements for the reduction of risks for equipments covered by the scope.
The common requirements apply to all of the subsequent parts of this EN 746 dealing with specific equipment unless an exception is stated in the relevant Part. The general principles (subclauses are pointed out) will be used to establish the specific technical measures in the subsequent Part(s) dealing with safety requirements for particular equipment.
NOTE   For similar equipment not covered by the particular Parts of this standard, EN 746-1 can be used to assist in the reduction of risk for the Hazards identified in clause 4 (List of Hazards).
1.2   This part of EN 746 is applicable to industrial thermoprocessing equipments for use in fields such as:
-   Metallurgical and metal working plant;
-   Glass making plant;
-   Ceramic manufacturing plant;
-   Cement, lime and gypsum manufacturing plant;
-   Chemical plant;
-   Waste incineration equipment;
And heated by:
-   Gaseous fuels;
-   Liquid fuels;
-   Solid fuels;
-   Mixed fuels;
-   Electricity.
The thermoprocessing equipment covered by this Part of EN 746 is further specified in clause 3.
A more detailed list of thermoprocessing equipment within these categories is given in Annex A.
In the remainder of this standard the expression "equipment" will be used.
This Part of EN 746 is not applicable to blast furnaces, converters (in steel plants), boilers, welding machines or food processing equipment.
1.3   This Part of EN 746 specifies the requirements to be

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    54 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1547:2001+A1:2009(Main)
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
EN 1547:2001+A1:2009

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of industrial thermoprocessing equipment as described especially in EN 746-1, EN 746-2 and EN 746-3. It also indicates the location of work stations where measurements need to be made.
Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for:
-   manufacturers to declare the noise emitted;
-   comparing the noise emitted by machines in the group concerned;
-   purposes of noise control at the source at the design stage.
The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3).
This standard does not cover the computation of personnel daily noise exposure.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 746-1:2000/kprA1:2009(Amendment)
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-1:1997/prA1
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 13577-2:2023(Main)
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems (ISO/FDIS 13577-2:2023)
FprEN ISO 13577-2

This part of ISO 13577 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE).
NOTE The general safety requirements common to TPE are provided in ISO 13577-1 (See introduction) Annex°B of ISO 13577-1 also includes a list of processes for which industrial furnaces and heating systems covered by ISO 13577 may be used.
This part of ISO 13577 deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex E, when used as intended and under the conditions foreseen by the manufacturer.
This part of ISO 13577 covers:
— fuel pipework downstream of and including the manual isolating valve;
— combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;
— burner(s), burner system and ignition device;
— functional requirements for safety related control system.
This part of ISO 13577 applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE.
For thermal or catalytic post combustion and waste incineration, this part of ISO 13577 applies only to auxiliary burners designed to start-up and/or support the process.
The pressure hazard of the piping and components covered by this part of ISO 13577 is within the maximum pressure/size relationship of category I as described in normative Annex A.
This part of ISO 13577 also gives the necessary requirements regarding information for use.
This part of ISO 13577 does not cover hazards from heating generated by electricity.
This part of ISO 13577 does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.
This part of ISO 13577 is not applicable to combustion and fuel handling systems:
— of gas welding and allied processes
— up-stream of the TPE manual isolating valve.
This part of ISO 13577 is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.
This part of ISO 13577 is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.
This document is not applicable to combustion and fuel handling systems manufactured before the date of its publication.

  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 746-2:2020(Main)
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
prEN 746-2

This part of EN 746 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE).
NOTE   The general safety requirements common to TPE are provided in prEN 746 1:2020 (See introduction).
This part of EN 746 deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex A, when used as intended and under the conditions foreseen by the manufacturer.
This part of EN 746 covers:
-   fuel pipework downstream of and including the manual isolating valve;
-   combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;
-   burner(s), burner system and ignition device;
-   functional requirements for safety related control system.
This part of EN 746 applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE.
For thermal or catalytic post combustion and waste incineration, this part of EN 746 applies only to auxiliary burners designed to start-up and/or support the process.
The pressure hazard of the piping and components covered by this part of EN 746 is within the maximum pressure/size relationship of category I as described in normative Annex E.
This part of EN 746 also gives the necessary requirements regarding information for use.
This part of EN 746 does not cover hazards from heating generated by electricity.
This part of EN 746 does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.
This part of EN 746 is not applicable to combustion and fuel handling systems:
-   of gas welding and allied processes;
-   up-stream of the TPE manual isolating valve.
This part of EN 746 is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.

  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 23495:2019(Main)
Industrial furnaces and associated processing equipment - Safety requirements for steel converter and associated equipment (ISO/DIS 23495:2019)
prEN ISO 23495

8. Scope
This document applies for new steel converter and its associated equipment (hereinafter referred to as converter plant) used in the process of carbon or stainless steel making as defined in 3.1 and illustrated in Annex B.
This document deals with significant hazards, hazardous situations and events relevant to the converter plant. It covers the intended use and foreseeable misuse.
This document specifies the safety requirements to be met during design, transport, setting up/installation, assembly, commissioning, operation, maintenance (as described in Clause 5) and decommissioning/dis¬assembly of the equipment.
NOTE 1   Assembly does not include erection because national regulations, e.g., national civil engineering laws and regulations or occupational health and safety regulations have to be considered.
This document applies to:
Steel converter and its associated equipment (see Annex B, Figure B.1) for the oxygen steelmaking process
   from charging hot metal/liquid steel and scrap;
   via oxygen refining and stirring;
   temperature measurement and sampling equipment;
   up to tapping including slag retaining device;
   cooling systems;
   maintenance devices (e.g., relining device, tap hole repair device, device for cleaning the converter mouth);
   process related interfaces/interactions (e.g., according to design, controls) to
o   process media,
o   primary and secondary gas cleaning plant,
o   material feeding systems and ladle alloying systems,
o   transfer cars for steel ladle and slag pot, and
o   charging/tapping equipment, e.g., crane, scrap chute, ladles and slag pots.
This document does not cover safety requirements for:
   usage of process media other than oxygen, nitrogen, argon and compressed air;
   primary and secondary gas cleaning plants;
   measuring devices with radioactive sources;
   material feeding systems and ladle alloying systems;
   transfer cars for steel ladle and slag pot;
   charging/tapping and de-slagging equipment, e.g., crane, scrap chutes, ladles and slag pots;
   auxiliary winches and hoists.
NOTE 2   For variations of converter process where other gases and process media, e.g., hydrocarbons, fuels, steam, etc. are used, additional safety measures have to be considered which are not covered in this safety standard.
NOTE 3   In case of revamping, this document can be used as a guideline for the specific parts to be revamped.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 746-11:2020(Main)
Industrial thermoprocessing equipment - Part 11: Safety requirements for protective systems
prEN 746-11

This part of EN 746 specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE).
The functional requirements to which the protective systems apply are specified in the other parts of the EN 746 series.

  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day