SIST EN 61753-1-3:2015

SLOVENSKI STANDARD
01-april-2015
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
6SORãQRLQQDYRGLOR]DVHVWDYHQRURGQHJDRSWLþQHJDNRQHNWRUMDLQNDEOD]D
LQGXVWULMVNDRNROMDNDWHJRULMD,,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 1-3: General and guidance for single-mode fibre optic connector and cable
assembly for industrial environment, Category I (IEC 61753-1-3:2014)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 1
-3: Allgemeines und Leitfaden für Einmoden-Lichtwellenleiter-Steckverbinder und
konfektionierte LWL-Kabel in rauer industrieller Umgebung der Kategorie I (IEC 61753-1-
3:2014)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 1-3 : Généralités et lignes directrices relatives aux connecteurs à
fibres optiques unimodales et aux cordons en environnement industriel, Catégorie I (CEI
61753-1-3:2014)
Ta slovenski standard je istoveten z: EN 61753-1-3:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61753-1-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 1-3: General and guidance for
single-mode fibre optic connector and cable assembly for
industrial environment, Category I
(IEC 61753-1-3:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Partie 1-3 : Généralités Bauteile - Betriebsverhalten - Teil 1-3: Allgemeines und
et lignes directrices relatives aux connecteurs à fibres Leitfaden für Einmoden-Lichtwellenleiter-Steckverbinder
optiques unimodales et aux cordons en environnement und konfektionierte LWL-Kabel in rauer industrieller
industriel, Catégorie I Umgebung der Kategorie I
(CEI 61753-1-3:2014) (IEC 61753-1-3:2014)
This European Standard was approved by CENELEC on 2014-06-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-1-3:2014 E
Foreword
The text of document 86B/3752/FDIS, future edition 1 of IEC 61753-1-3, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-1-3:2014.
The following dates are fixed:
• latest date by which the document has (dop) 2015-03-27
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-06-27
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-1-3:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-2-35 NOTE Harmonised as EN 61300-2-35.

- 3 - EN 61753-1-3:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60068-2-60 -  Environmental testing -- Part 2-60: Tests EN 60068-2-60 -
- Test Ke: Flowing mixed gas corrosion
test
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
IEC 60793-2-50 -  Optical fibres -- Part 2-50: Product EN 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61300 - Fibre optic interconnecting devices and EN 61300 (series) -
(series) passive components - Basic test and
measurement procedures
IEC 61300-2-1 -  Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -- Part 2-1:
Tests - Vibration (sinusoidal)
IEC 61300-2-2 -  Fibre optic interconnecting devices and EN 61300-2-2 -
passive components - Basic test and
measurement procedures -- Part 2-2:
Tests - Mating durability
IEC 61300-2-4 -  Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -- Part 2-4:
Tests - Fibre/cable retention
IEC 61300-2-5 -  Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -- Part 2-5:
Tests - Torsion
IEC 61300-2-6 -  Fibre optic interconnecting devices and EN 61300-2-6 -
passive components - Basic test and
measurement procedures -- Part 2-6:
Tests - Tensile strength of coupling
mechanism
IEC 61300-2-7 -  Fibre optic interconnecting devices and EN 61300-2-7 -
passive components - Basic test and
measurement procedures -- Part 2-7:
Tests - Bending moment
IEC 61300-2-9 -  Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -- Part 2-9:
Tests - Shock
IEC 61300-2-10 -  Fibre optic interconnecting devices and EN 61300-2-10 -
passive components - Basic test and
measurement procedures -- Part 2-10:
Tests - Crush resistance
IEC 61300-2-12 -  Fibre optic interconnecting devices and EN 61300-2-12 -
passive components - Basic test and
measurement procedures -- Part 2-12:
Tests - Impact
IEC 61300-2-22 -  Basic test and measurement procedures - -
- Part 2-22: Tests - Change of
temperature
IEC 61300-2-26 -  Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures -- Part 2-26:
Tests - Salt mist
IEC 61300-2-34 -  Fibre optic interconnecting devices and EN 61300-2-34 -
passive components - Basic test and
measurement procedures -- Part 2-34:
Tests - Resistance to solvents and
contaminating fluids of interconnecting
components and closures
IEC 61300-2-46 -  Fibre optic interconnecting devices and EN 61300-2-46 -
passive components - Basic test and
measurement procedures -- Part 2-46:
Tests - Damp heat cyclic
IEC 61300-3-1 -  Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -- Part 3-1:
Examinations and measurements -
Visual examination
IEC 61300-3-3 -  Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -- Part 3-3:
Examinations and measurements -
Active monitoring of changes in
attenuation and return loss
IEC 61300-3-4 2012 Fibre optic interconnecting devices and EN 61300-3-4 2013
passive components - Basic test and
measurement procedures -- Part 3-4:
Examinations and measurements -
Attenuation
IEC 61300-3-6 -  Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -- Part 3-6:
Examinations and measurements -
Return loss
IEC 61300-3-11 -  Fibre optic interconnecting devices and EN 61300-3-11 -
passive components - Basic test and
measurement procedures -- Part 3-11:
Examinations and measurements -
Engagement and separation forces
IEC 61300-3-28 -  Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -- Part 3-28:
Examinations and measurements -
Transient loss
- 5 - EN 61753-1-3:2014
IEC 61300-3-34 -  Fibre optic interconnecting devices and EN 61300-3-34 -
passive components - Basic test and
measurement procedures -- Part 3-34:
Examinations and measurements -
Attenuation of random mated connectors
IEC 61300-3-35 -  Fibre optic interconnecting devices and EN 61300-3-35 -
passive components - Basic test and
measurement procedures -- Part 3-35:
Examinations and measurements -
Visual inspection of fibre optic connectors
and fibre-stub transceivers
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance
standard -- Part 1: General and guidance
for performance standards
IEC 61754 - Fibre optic interconnecting devices and EN 61754 (series) -
(series) passive components - Fibre optic
connector interfaces
IEC 61755 - Fibre optic interconnecting devices and EN 61755 (series) -
(series) passive components -Fibre optic
connector optical interfaces
IEC 61755-1 -  Fibre optic interconnecting devices and EN 61755-1 -
passive components -Fibre optic
connector optical interfaces -- Part 1:
Optical interfaces for single mode non-
dispersion shifted fibres - General and
guidance
ISO/IEC 24702 -  Information technology - Generic cabling - -
- Industrial premises
ISO/IEC/TR -  Information technology - Generic cabling - -
29106 - Introduction to the MICE environmental
classification
IEC 61753-1-3 ®
Edition 1.0 2014-05
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 1-3: General and guidance for single-mode fibre optic connector and cable

assembly for industrial environment, Category I

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.20 ISBN 978-2-8322-1582-1

– 2 – IEC 61753-1-3:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Abbreviations . 7
4 Industrial environment . 7
4.1 General . 7
4.2 Cross reference with MICE . 7
5 Tests . 8
5.1 General . 8
5.2 Sample definition . 8
5.3 Sample size . 8
6 Test report . 9
7 Reference component . 9
8 Performance requirements . 9
8.1 General . 9
8.2 Dimensions . 9
8.3 Test preparation and accomplishment . 9
8.4 Performance criteria . 9
9 Performance tests . 10
Annex A (normative) Sample size . 18
Bibliography . 19

Figure 1 – Example of a free plug and a socket . 8
Figure 2 – Example of a plug coupler plug . 8

Table 1 – Single mode attenuation and return loss grades at 1 310 nm and 1 550 nm . 10
Table 2 – Test description (1 of 8) . 10
Table A.1 – Sample size and product sourcing requirements . 18

IEC 61753-1-3:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 1-3: General and guidance for single-mode fibre optic connector
and cable assembly for industrial environment, Category I

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-1-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This first edition cancels and replaces IEC/PAS 61753-1-3 published in 2009. This edition
constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3752/FDIS 86B/3780/RVD
– 4 – IEC 61753-1-3:2014 © IEC 2014
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on
the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IEC 61753-1-3:2014 © IEC 2014 – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 1-3: General and guidance for single-mode fibre optic connector
and cable assembly for industrial environment, Category I

1 Scope
This part of IEC 61753 defines the minimum initial performance, test and measurement
requirements and severities which a connector or cable assembly with single-mode fibres
needs to satisfy in order to be categorized as meeting IEC Category I (industrial environment).
Category I is an additional environmental category to C, U, O and E already described in
IEC 61753-1. Category I is based on the MICE Table described in ISO/IEC 24702.
The performance tests evaluate the product for two basic acceptance criteria: mechanical
integrity and optical transmission requirements, by simulating the effects of exposure to the
environment in which it will be installed, simulating installation and intervention conditions,
and evaluating specified features of the product.
The defined performance test procedures simulate the situation in a mated condition under
use in an industrial environment. It is not the intention to simulate the situation:
when being mated or demated;
during the assembling of the connector;
during transportation and storage of the connector.
Reliability tests for life time expectations are not covered by this standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60068-2-60, Environmental testing – Part 2: Tests – Test Ke: Flowing mixed gas
corrosion test
IEC 60529:1989, Degrees of protection provided by enclosures (IP Code)
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic
test and measurement procedures
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-2, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-2: Tests – Mating durability

– 6 – IEC 61753-1-3:2014 © IEC 2014
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre/cable retention
IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-5: Tests – Torsion
IEC 61300-2-6, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism
IEC 61300-2-7, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-7: Tests – Bending moment
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-10, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-10: Tests – Crush resistance
IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-12: Tests – Impact
IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-2: Tests – Mating durability
IEC 61300-2-26, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-26: Tests – Salt mist
IEC 61300-2-34, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-34: Tests – Resistance to solvents and contaminating
fluids of interconnecting components and closures
IEC 61300-2-46, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-46: Tests – Damp heat, cyclic
IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-1: Examinations and measurements – Visual examination
IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
changes in attenuation and return loss
IEC 61300-3-4:2012, Fibre optic interconnecting devices and passive components – Basic
test and measurement procedures – Part 3-4: Examinations and measurements – Attenuation
IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-6: Examinations and measurements – Return loss
IEC 61300-3-11, Fibre optic interconnecting devices and passive components – Basic test
and measurement proce
...