SIST EN 61754-5:2006

STANDARDVmesniki optičnih konektorjev – 5. del: Konektorska družina tipa MT (IEC 61754-5:2005)Fibre optic connector interfaces - Part 5: Type MT connector family (IEC 61754-5:2005)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61754-5:2006(en)ICS33.180.20

EUROPEAN STANDARD
EN 61754-5 NORME EUROPÉENNE EUROPÄISCHE NORM
December 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-5:2005 E
ICS 33.180.20 Supersedes EN 61754-5:2001
English version
Fibre optic connector interfaces Part 5: Type MT connector family (IEC 61754-5:2005)
Interfaces de connecteurs
pour fibres optiques Partie 5: Famille de connecteurs
de type MT (CEI 61754-5:2005)
Steckgesichter von
Lichtwellenleiter-Steckverbindern Teil 5: Steckverbinderfamilie
der Bauart MT (IEC 61754-5:2005)
This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Foreword The text of document 86B/2126/FDIS, future edition 2 of IEC 61754-5, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-5 on 2005-10-01. This European Standard supersedes EN 61754-5:2001. Specific technical changes involve addition of intermateability dimensions for alignment pins. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-07-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-10-01 __________ Endorsement notice The text of the International Standard IEC 61754-5:2005 was approved by CENELEC as a European Standard without any modification. __________

NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61754-5Deuxième éditionSecond edition2005-07 Interfaces de connecteurs pour fibres optiques – Partie 5: Famille de connecteurs de type MT
Fibre optic connector interfaces – Part 5: Type MT connector family
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE L Commission Electrotechnique InternationaleInternational Electrotechnical Commission

61754-5  IEC:2005 – 3 – CONTENTS
FOREWORD.5
1 Scope.9 2 Description.9 3 Interfaces.9
Figure 1 – MT plug configuration and intermateability options.11 Figure 2 – MT alignment pin.13 Figure 3 – MT clamp spring.15 Figure 4 – MT interface.17 Figure 5 – Optical datum target location on plug endface.19 Figure 6 – Gauge for guide pin holes.21 Figure 7 – MT alignment pin hole gauge.23
Table 1 – Dimensions for MT alignment pin.13 Table 2 – Dimensions for MT clamp spring.15 Table 3 – Dimensions for MT interface.17 Table 4 – Dimensions for gauge for guide pin holes.21 Table 5 – Dimensions for MT alignment pin hole gauge.23

61754-5  IEC:2005 – 5 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 5: Type MT connector family
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Internation
...