SIST EN 4508:2009

SLOVENSKI STANDARD
SIST EN 4508:2009
01-julij-2009
Aeronavtika - Barve in laki - Preskusne metode za protizdrsne premaze -
Ugotavljanje obnašanja trenja pri drsenju
Aerospace series - Paints and varnishes - Test method for anti slip coatings -
Determination of the sliding friction behaviour
Luft- und Raumfahrt - Anstrichstoffe - Prüfverfahren für tritt- und rutschfeste
Beschichtungen - Bestimmung des Gleitreibungsverhaltens
Série aérospatiale - Peintures et vernis - Méthode d'essai pour peinture antidérapante -
Détermination comportement au glissage avec friction
Ta slovenski standard je istoveten z: EN 4508:2006
ICS:
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
SIST EN 4508:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4508:2009

---------------------- Page: 2 ----------------------

SIST EN 4508:2009
EUROPEAN STANDARD
EN 4508
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 49.040

English Version
Aerospace series - Paints and varnishes - Test method for anti
slip coatings - Determination of the sliding friction behaviour
Série aérospatiale - Peintures et vernis - Méthode d'essai Luft- und Raumfahrt - Anstrichstoffe - Prüfverfahren für tritt-
pour peinture antidérapante - Détermination du und rutschfeste Beschichtungen - Bestimmung des
comportement au glissage avec friction Gleitreibungsverhaltens
This European Standard was approved by CEN on 6 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4508:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4508:2009
EN 4508:2006 (E)
Contents Page
0 Introduction.4
1 Scope .4
2 Normative references .4
3 Definitions .4
3.1 Sliding friction coefficient µ.4
4 Principle of the method.4
5 Designation of the method .4
6 Apparatus .4
7 Test specimen.5
7.1 Manufacture of test panels .5
7.2 Preparation of test specimens .5
7.3 Number of specimens .5
8 Procedure .5
9 Presentation of the results .5
9.1 Friction coefficient.5
9.2 Requirement.6
10 Test report .6

2

---------------------- Page: 4 ----------------------

SIST EN 4508:2009
EN 4508:2006 (E)
Foreword
This European Standard (EN 4508:2006) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-
ceived the approval of the National Associations and the Official Services of the member countries of AECM
...