kSIST prEN IEC 63522-35:2024

SLOVENSKI STANDARD
oSIST prEN IEC 63522-35:2024
01-april-2024
Električni releji - Preskusi in meritve - 35. del: Odpornost na čistilna topila
Electrical relays - Tests and measurements - Part 35: Resistance to cleaning solvents
Ta slovenski standard je istoveten z: prEN IEC 63522-35:2024
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 63522-35:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 63522-35:2024
oSIST prEN IEC 63522-35:2024
94/975/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63522-35 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-02 2024-04-26
SUPERSEDES DOCUMENTS:
94/862/CD, 94/973/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical relays - Tests and Measurements - Part 35: Resistance to cleaning solvents

PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.

oSIST prEN IEC 63522-35:2024
94/975/CDV – 2 – IEC CDV 63522-35 © IEC 2023

CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test procedure . 6
4.1 General . 6
4.2 Procedure . 6
4.3 Conditions . 6
4.3.1 Ambient environment conditions . 6
4.3.2 Solvents to be used . 6
4.3.3 Solvent temperature . 7
4.3.4 Test method . 7
5 Evaluation . 7
5.1 Visual inspection . 7
5.2 Final measurements. 7
5.3 Test report . 7
Bibliography . 9

oSIST prEN IEC 63522-35:2024
IEC CDV 63522-35 © IEC 2023 – 3 – 94/975/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 ELECTRICAL RELAYS – Tests and Measurements –
6 Part 35: Resistance to cleaning solvents
8 FOREWORD
9 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
10 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
11 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
12 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
13 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
14 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
15 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
16 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
17 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
18 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
19 consensus of opinion on the relevant subjects since each technical committee has representation from all
20 interested IEC National Committees.
21 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
22 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
23 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
24 misinterpretation by any end user.
25 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
26 transparently to the maximum extent possible in their national and regional publications. Any divergence between
27 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
28 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
29 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
30 services carried out by independent certification bodies.
31 6) All users should ensure that they have the latest edition of this publication.
32 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
33 members of its technical committees and IEC National Committees for any personal injury, property damage or
34 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
35 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
36 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
37 indispensable for the correct application of this publication.
38 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
39 rights. IEC shall not be held responsible for identifying any or all such patent rights.
40 The International Standard of the IEC 63522-35 has been prepared by IEC technical committee
41 94: Electrical relays.
42 The text of this International Standard is based on the following documents:
CD CC
94/862/CD 94/873/CC
44 Full information on the voting for the approval of this International Standard can be found in the
45 report on voting indicated in the above table.
46 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
47 A list of all parts of IEC 61810 series, published under the general title Electromechanical
48 elementary relays can be found on the IEC website.
49 This International Standard is to be used in conjunction with IEC 61810-1:2015.

oSIST prEN IEC 63522-35:2024
94/975/CDV – 4 – IEC CDV 63522-35 © IEC 2023
50 The committee has decided that the contents of this document will remain unchanged until the
51 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
52 the specific document. At this date, the document will be
53 • reconfirmed,
54 • withdrawn,
55 • replaced by a revised edition, or
56 • amended.
57 A bilingual version of th
...