SIST EN 4048:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C - Technical specificationAerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C - Technical specification49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 4048:2003SIST EN 4048:2004en01-maj-2004SIST EN 4048:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4048January 2003ICS 49.030.30English versionAerospace series - Nuts, self-locking, MJ threads, in heatresisting nickel base alloy NI-PH2601 (Inconel 718), MoS2coated - Classification: 1 550 MPa (at ambient temperature) /425 °C - Technical specificationThis European Standard was approved by CEN on 2 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4048:2003 ESIST EN 4048:2004

1)Corresponds to the minimum tensile stress which the nut is able to withstand at ambient temperature without breaking orcracking when tested with a bolt of a higher strength class.2)Maximum test temperature of the partsSIST EN 4048:2004

3)Published by American Society for Testing and Materials (ASTM), 100 Barr Harbor Dr, West Conshohocken,PA 19428-2959 - USASIST EN 4048:2004

4 ) Definition taken from ISO 3534SIST EN 4048:2004
...