SIST EN IEC 62148-6:2020

SLOVENSKI STANDARD
01-julij-2020
Nadomešča:
SIST EN 62148-6:2004
Aktivne komponente in naprave optičnih vlaken - Standardi za ohišja in vmesnike -
6. del: Oddajniki in sprejemniki ATM-PON (IEC 62148-6:2020)
Fibre optic active components and devices - Package and interface standards - Part 6:
ATM-PON transceivers (IEC 62148-6:2020)
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -
Teil 6: ATM-PON Sende- und Empfangsmodule (IEC 62148-6:2020)
Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface -
Partie 6: Emetteurs-récepteurs PON-ATM (IEC 62148-6:2020)
Ta slovenski standard je istoveten z: EN IEC 62148-6:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62148-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 33.180.20 Supersedes EN 62148-6:2003 and all of its amendments
and corrigenda (if any)
English Version
Fibre optic active components and devices - Package and
interface standards - Part 6: ATM-PON transceivers
(IEC 62148-6:2020)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse-
boîtier et d'interface - Partie 6: Emetteurs-récepteurs ATM- und Schnittstellennormen - Teil 6: ATM-PON Sende- und
PON Empfangsmodule
(IEC 62148-6:2020) (IEC 62148-6:2020)
This European Standard was approved by CENELEC on 2020-03-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62148-6:2020 E

European foreword
The text of document 86C/1590/CDV, future edition 2 of IEC 62148-6, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62148-6:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-12-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-31
document have to be withdrawn
This document supersedes EN 62148-6:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62148-6:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60130 (series) NOTE Harmonized as EN 60130 (series)
IEC 60191 (series) NOTE Harmonized as EN 60191 (series)
IEC 60603 (series) NOTE Harmonized as EN 60603 (series)
IEC 60794 (series) NOTE Harmonized as EN 60794 (series)
IEC 60825 (series) NOTE Harmonized as EN 60825 (series)
IEC 61076 (series) NOTE Harmonized as EN 61076 (series)
IEC 61281-1 NOTE Harmonized as EN IEC 61281-1
ISO 1101 NOTE Harmonized as EN ISO 1101

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2 series Optical fibres - Part 2: Product specifications EN IEC 60793-2 series
IEC 60874 series Fibre optic interconnecting devices and - -
passive components - Connectors for optical
fibres and cables
IEC 61754 series Fibre optic interconnecting devices and - -
passive components - Fibre optic connector
interfaces
IEC 62148-1 - Fibre optic active components and devices - EN IEC 62148-1 -
Package and interface standards - Part 1:
General and guidance
ITU-T G.652 - Characteristics of a single-mode optical fibre - -
and cable
ITU-T G.657 - Characteristics of a bending-loss insensitive - -
single-mode optical fibre and cable
ITU-T G.983.1 - Broadband optical access systems based on - -
Passive Optical Networks (PON)

IEC 62148-6 ®
Edition 2.0 2020-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –

Part 6: ATM-PON transceivers
Composants et dispositifs actifs fibroniques – Normes de boîtier et d'interface –

Partie 6: Emetteurs-récepteurs ATM-PON

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-7902-1

– 2 – IEC 62148-6:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
4 Classification . 7
5 Optical interface . 7
5.1 General . 7
5.2 Pigtail interface . 8
6 Electrical interface . 8
6.1 General . 8
6.2 Numbering of electrical terminals . 8
6.3 Electrical terminal assignment . 8
7 Outline. 9
7.1 Drawing of case outline . 9
7.2 Drawing of case footprint . 10
Bibliography . 12

Figure 1 – Numbering assignments of electrical terminals (viewed from above with
pins underneath) . 8
Figure 2 – Case outline . 10
Figure 3 – Case footprint . 11

Table 1 – Pin function definitions: transmitter section of the transceiver . 9
Table 2 – Pin function definitions: receiver section of the transceiver . 9

IEC 62148-6:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 6: ATM-PON transceivers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technica
...