Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10mm inner diameter of outer conductor nominal characteristic impedance 50 Ohms, Series 4.3-10r (IEC 61169-54:2016)

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for coaxial connectors with 10 mm inner
diameter of outer conductor, characteristic impedance 50 Ω, series 4,3-10 with screw type,
hand screw type or quick-lock type coupling, for an upper operating frequency limit of 6 GHz,
for use in wireless telecommunication and wireless network applications in conjunction with
appropriate transmission line types for these applications.
It also describes mating face dimensions for general purpose connectors, gauging information
and tests selected from IEC 61169-1, applicable to all detail specifications relating to
4,3-10 series connectors.
This specification indicates the recommended performance characteristics to be considered
when writing a detail specification and it covers test schedules and inspection requirements
for assessment levels M and H.

Hochfrequenz-Steckverbinder - Teil 54: Rahmenspezifikation für koaxiale Hochfrequenzsteckverbinder mit 10 mm Innendurchmesser des Außenleiters, Wellenwiderstand 50 Ω, Typ 4,3-10

Connecteurs pour fréquences radioélectriques - Partie 54: Spécification intermédiaire relative aux connecteurs coaxiaux avec diamètre intérieur du conducteur extérieur de 10 mm, impédance caractéristique nominale de 50 Ω, série 4,3-10

L'IEC 61169-54:2016 est une spécification intermédiaire (SI), qui fournit des informations et des règles en vue de l'établissement de spécifications particulières (SP) pour des connecteurs coaxiaux avec un diamètre intérieur du conducteur extérieur de 10 mm, une impédance caractéristique nominale de 50 Ohms, série 4,3-10, à couplage de type à vis, manuel à vis ou à verrouillage rapide, de fréquence de fonctionnement inférieure ou égale à 6 GHz, utilisés dans des applications de télécommunication sans fil et de réseau sans fil conjointement avec des lignes de transmission appropriées destinées à ces applications. Elle décrit également les dimensions des faces d'accouplement pour des connecteurs d'usage général, ainsi que des informations concernant les calibres et les essais choisis dans l'IEC 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs de la série 4,3-10. La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière, et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H.

Radiofrekvenčni konektorji - 54. del: Področna specifikacija za koaksialne konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno karakteristično impendanco 50 ohm, serija 4,3-10r (IEC 61169-54:2016)

Ta del standarda IEC 61169, ki je področna specifikacija (SS), podaja informacije in pravila za pripravo podrobnih specifikacij (DS) za koaksialne konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno karakteristično impendanco 50 Ω, serija 4,3-10, z vijačno spenjačo, ročno vijačno spenjačo ali zaklepno spenjačo za zgornjo mejno vrednost frekvenčnega območja delovanja 6 GHz za uporabo pri brezžični telekomunikaciji in v brezžičnem omrežju skupaj z ustreznimi prenosnimi vodi.
Opisuje tudi prednje mere stikanja za konektorje za splošni namen, informacije o merjenju in preskuse, izbrane iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji serije 4,3-10.
Ta specifikacija navaja priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobne specifikacije, ter zajema razporede preskusov in zahteve za pregled za ravni vrednotenja M in H.

General Information

Status
Published
Publication Date
15-Dec-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Dec-2016
Due Date
18-Feb-2017
Completion Date
16-Dec-2016

Relations

Buy Standard

Standard
EN 61169-54:2017 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61169-54:2017
01-februar-2017
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD]DNRDNVLDOQH
NRQHNWRUMH]QRWUDQMLPSUHPHURP]XQDQMLKYRGQLNRYPPLQQD]LYQR
NDUDNWHULVWLþQRLPSHQGDQFRRKPVHULMDU ,(&
Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with
10mm inner diameter of outer conductor nominal characteristic impedance 50 Ohms,
Series 4.3-10r (IEC 61169-54:2016)
Ta slovenski standard je istoveten z: EN 61169-54:2016
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML RF connectors
5)
SIST EN 61169-54:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61169-54:2017

---------------------- Page: 2 ----------------------

SIST EN 61169-54:2017


EUROPEAN STANDARD EN 61169-54

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2016
ICS 33.120.30

English Version
Radio-frequency connectors -
Part 54: Sectional specification for coaxial connectors
with 10 mm inner diameter of outer conductor,
nominal characteristic impedance 50 Ω, series 4,3-10
(IEC 61169-54:2016)
Connecteurs pour fréquences radioélectriques -  Hochfrequenz-Steckverbinder -
Partie 54: Spécification intermédiaire relative aux Teil 54: Rahmenspezifikation für koaxiale
connecteurs coaxiaux avec diamètre intérieur du Hochfrequenzsteckverbinder mit 10 mm Innendurchmesser
conducteur extérieur de 10 mm, impédance caractéristique
des Außenleiters, Wellenwiderstand 50 Ω, Typ 4,3-10
nominale de 50 Ω, série 4,3-10 (IEC 61169-54:2016)
(IEC 61169-54:2016)
This European Standard was approved by CENELEC on 2016-10-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61169-54:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61169-54:2017
EN 61169-54:2016
European foreword
The text of document 46F/348/FDIS, future edition 1 of IEC 61169-54, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61169-54:2016.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-07-11
national level by publication of an identical national
standard or by endorsement
(dow) 2019-10-11
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61169-54:2016 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 61169-54:2017
EN 61169-54:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.