SIST EN 12274-1:2002
(Main)Slurry surfacing - Test methods - Part 1: Sampling for binder extraction
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction
This European Standard specifies a method for sampling of slurry mixtures for extraction tests.
The Standard applies to slurry surfacings for roads, airfields and other trafficked areas
Dünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 1: Probenahme für Extraktionsverfahren
Diese Europäische Norm legt ein Verfahren zur Probenahme von Mischgut für dünne Asphaltschichten in Kalt-bauweise
zur Durchführung von Extraktionsverfahren fest.
Diese Norm gilt für dünne Asphaltschichten in Kaltbauweise von Straßen, Flugplätzen und sonstigen Verkehrs-flächen.
Matériaux bitumineux coulés a froid - Méthodes d'essai - Partie 1: Echantillonnage en vue de l'extraction du liant
La présente Norme européenne spécifie une méthode de prélevement d'échantillons de mélanges de matériaux bitumineux coulés a froid en vue des essais d'extraction.
La présente norme s'applique aux matériaux bitumineux coulés a froid pour les routes, terrains d'aviation et autres zones de trafic.
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Slurry surfacing - Test methods - Part 1: Sampling for binder extractionDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 1:Probenahme für ExtraktionsverfahrenMatériaux bitumineux coulés a froid - Méthodes d'essai - Partie 1: Echantillonnage en vue de l'extraction du liantSlurry surfacing - Test methods - Part 1: Sampling for binder extraction93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12274-1:2002SIST EN 12274-1:2002en01-september-2002SIST EN 12274-1:2002SLOVENSKI
STANDARD
SIST EN 12274-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12274-1January 2002ICS 93.080.20English versionSlurry surfacing - Test methods - Part 1: Sampling for binderextractionMatériaux bitumineux coulés à froid - Méthodes d'essai -Partie 1: Echantillonnage en vue de l'extraction du liantDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil1: Probenahme für ExtraktionsverfahrenThis European Standard was approved by CEN on 9 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12274-1:2002 ESIST EN 12274-1:2002
EN 12274-1:2002 (E)2ContentspageForeword.31Scope.42Apparatus.43Procedure.44Sampling report.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.