SIST EN ISO 15874-2:2013/A1:2018
(Amendment)Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 2: Rohre (ISO 15874-2:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 2: Tubes - Amendement 1 (ISO 15874-2:2013/Amd 1:2018)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polipropilen (PP) - 2. del: Cevi - Dopolnilo A1 (ISO 15874-2:2013/Amd 1:2018)
General Information
- Status
- Published
- Public Enquiry End Date
- 04-Sep-2017
- Publication Date
- 10-Oct-2018
- Technical Committee
- PCV - Plastic pipes, fittings and valves
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 20-Aug-2018
- Due Date
- 25-Oct-2018
- Completion Date
- 11-Oct-2018
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 01-Nov-2018
Overview
SIST EN ISO 15874-2:2013/A1:2018 is an essential European standard focusing on plastics piping systems for hot and cold water installations, specifically addressing polypropylene (PP) pipes. This document is an amendment to EN ISO 15874-2:2013, introduced to refine and expand the technical specifications related to the dimensions and tolerances of polypropylene pipes used within water supply systems.
Prepared by the collaboration of ISO Technical Committee ISO/TC 138 and CEN Technical Committee CEN/TC 155, this amendment ensures harmonized requirements across CEN member countries. It aligns material standards for polypropylene piping, facilitating the consistent quality, safety, and performance of piping systems essential for both domestic and commercial hot and cold water installations.
Key Topics
Scope Extension: Inclusion of larger pipe dimensions ranging from 180 mm to 250 mm, expanding the applicability of polypropylene pipes in larger water supply systems.
Pipe Dimensions: Detailed specifications on nominal diameter, mean outside diameter, and a comprehensive series of wall thickness options within dimension class A, carefully categorized by pipe series ranging from S 8 to S 2.
Tolerance Requirements: Updated tolerance limits on wall thickness of pipes, ensuring precision manufacturing, durability, and conformity with Grade A tolerance levels as per ISO 11922-1 standards.
Material Focus: Concentration on PP-RCT (Polypropylene Random Copolymer with Modified Crystalline Structure), which is known for advanced thermal and mechanical properties suitable for pressure piping systems in water installations.
Standardization and Compliance: Clear guidance for CEN national bodies to incorporate this amendment as part of their national standards without alterations, ensuring uniformity across Europe.
Applications
SIST EN ISO 15874-2:2013/A1:2018 applies primarily to:
- Installation of hot water distribution systems in residential, commercial, and industrial buildings where polypropylene piping is preferred due to corrosion resistance and chemical inertness.
- Cold water supply systems within municipal infrastructure and private water networks demanding standardized, high-quality plastic piping.
- Systems requiring pressure-rated polypropylene pipes with reliable mechanical performance and longevity.
- Scenarios where precise manufacturing tolerances are vital to guarantee pipe fitting compatibility, ease of installation, and maintenance efficiency.
This amendment supports engineers, manufacturers, and suppliers by providing reliable dimensions and material specifications critical to the design and installation of safe, durable plumbing solutions.
Related Standards
- EN ISO 15874-1: Covers general aspects and requirements applicable to polypropylene plastics piping systems for water installations.
- EN ISO 15874-3: Provides specifications for fittings in polypropylene piping systems.
- ISO 11922-1: Defines tolerance grades related to pipes and provides the tolerances referenced in EN ISO 15874-2:2013/A1.
- EN ISO 15874 Series: Comprehensive coverage of polypropylene piping components, including pipes (part 2), fittings, valves, and installation practices.
- CEN/TS 12155: Addresses testing methods related to plastic piping system components.
By adhering to SIST EN ISO 15874-2:2013/A1:2018, stakeholders in the plastics piping industry can ensure higher reliability and standard compliance of polypropylene pipes used in critical water supply systems, promoting uniformity and safety across European water installations.
Frequently Asked Questions
SIST EN ISO 15874-2:2013/A1:2018 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)". This standard covers: Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
SIST EN ISO 15874-2:2013/A1:2018 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 15874-2:2013/A1:2018 has the following relationships with other standards: It is inter standard links to SIST EN ISO 15874-2:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 15874-2:2013/A1:2018 is associated with the following European legislation: EU Directives/Regulations: 89/106/EEC; Standardization Mandates: M/131. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 15874-2:2013/A1:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2018
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLSURSLOHQ 33 GHO &HYL'RSROQLOR$ ,62 $PG
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2:
Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen
(PP) - Teil 2: Rohre (ISO 15874-2:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polypropylène (PP) - Partie 2: Tubes - Amendement 1 (ISO 15874-2:2013/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 15874-2:2013/A1:2018
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15874-2:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO
15874-2:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylène Kaltwasserinstallation - Polypropylen (PP) - Teil 2:
(PP) - Partie 2: Tubes - Amendement 1 (ISO 15874- Rohre - Änderung 1 (ISO 15874-2:2013/Amd 1:2018)
2:2013/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 15874-2:2013; it was approved by CEN on 28 June 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-2:2013/A1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15874-2:2013/A1:2018) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15874-2:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2019,
and conflicting national standards shall be withdrawn at the latest by February 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Endorsement notice
The text of ISO 15874-2:2013/Amd 1:2018 has been approved by CEN as EN ISO 15874-
2:2013/A1:2018 without any modification.
INTERNATIONAL ISO
STANDARD 15874-2
Second edition
2013-02-15
AMENDMENT 1
2018-07
Plastics piping systems for hot
and cold water installations —
Polypropylene (PP) —
Part 2:
Pipes
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polypropylène (PP) —
Partie 2: Tubes
AMENDEMENT 1
Reference number
ISO 15874-2:2013/Amd.1:2018(E)
©
ISO 2018
ISO 15874-2:2013/Amd.1:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...