SIST EN IEC 62676-5-1:2024

SLOVENSKI STANDARD
01-november-2024
Sistemi za videonadzor v varnostnih aplikacijah - 5-1. del: Specifikacije podatkov
in kakovost slike kamer - Okoljske preskusne metode za kakovost slike (IEC 62676
-5-1:2024)
Video surveillance systems for use in security applications - Part 5-1: Data specifications
and image quality performance for camera devices - Environmental test methods for
image quality performance (IEC 62676-5-1:2024)
Videoüberwachungsanlagen für Sicherungsanwendungen - Teil 5-1:
Datenspezifikationen und Bildqualitätsleistung für Kamerageräte - Umweltprüfverfahren
für die Bildqualitätsleistung (IEC 62676-5-1:2024)
Systèmes de vidéosurveillance destinés à être utilisés dans les applications de sécurité -
Partie 5-1: Spécifications des données et performances de la qualité d'image pour les
dispositifs de caméra - Méthodes d'essai d'environnement pour les performances de la
qualité d'image (IEC 62676-5-1:2024)
Ta slovenski standard je istoveten z: EN IEC 62676-5-1:2024
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62676-5-1

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2024
ICS 13.320
English Version
Video surveillance systems for use in security applications - Part
5-1: Data specifications and image quality performance for
camera devices - Environmental test methods for image quality
performance
(IEC 62676-5-1:2024)
Systèmes de vidéosurveillance destinés à être utilisés dans Videoüberwachungsanlagen für Sicherungsanwendungen -
les applications de sécurité - Partie 5-1: Spécifications des Teil 5-1: Datenspezifikationen und Bildqualitätsleistung für
données et performances de la qualité d'image pour les Kamerageräte - Umweltprüfverfahren für die
dispositifs de caméra - Méthodes d'essai d'environnement Bildqualitätsleistung
pour les performances de la qualité d'image (IEC 62676-5-1:2024)
(IEC 62676-5-1:2024)
This European Standard was approved by CENELEC on 2024-08-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62676-5-1:2024 E

European foreword
The text of document 79/704/FDIS, future edition 1 of IEC 62676-5-1, prepared by TC 79 "Alarm and
electronic security systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62676-5-1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-05-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-08-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 62676-5:2018.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62676-5-1:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068-2-78 NOTE Approved as EN 60068-2-78
IEC 62676-1-1 NOTE Approved as EN 62676-1-1
IEC 62676-2-1 NOTE Approved as EN 62676-2-1
IEC 62676-3 NOTE Approved as EN 62676-3
IEC 62676-4 NOTE Approved as EN 62676-4
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-1 2007 Environmental testing - Part 2-1: Tests - EN 60068-2-1 2007
Test A: Cold
IEC 60068-2-2 2007 Environmental testing - Part 2-2: Tests - EN 60068-2-2 2007
Test B: Dry heat
IEC 62676-5 2018 Video surveillance systems for use in EN IEC 62676-5 2018
security applications - Part 5: Data
specifications and image quality
performance for camera devices

IEC 62676-5-1 ®
Edition 1.0 2024-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Video surveillance systems for use in security applications –

Part 5-1: Data specifications and image quality performance for camera devices –

Environmental test methods for image quality performance

Systèmes de vidéosurveillance destinés à être utilisés dans les applications de

sécurité –
Partie 5-1: Spécifications des données et performances de la qualité d'image

pour les dispositifs de caméra – Méthodes d'essai d'environnement pour les

performances de la qualité d'image

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320  ISBN 978-2-8322-9345-4

– 2 – IEC 62676-5-1:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
4 Test environment . 7
4.1 Overview. 7
4.2 Test environment configuration . 7
4.3 Measurement environment . 7
5 Test . 8
5.1 General test conditions . 8
5.2 General standard photographing conditions . 8
5.2.1 Lighting conditions . 8
5.2.2 Field angle . 9
5.2.3 Lens iris . 9
5.2.4 Standard camera settings . 9
5.3 Image quality . 9
5.3.1 Resolution . 9
5.3.2 Results of resolution . 10
5.4 Environmental test method . 10
5.4.1 Testing conditions . 10
5.4.2 High temperature operation test . 11
5.4.3 Low temperature operation test . 12
5.4.4 High temperature and high humidity operation test . 13
5.4.5 Performance recovery . 14
5.4.6 Reporting of test results . 14
5.5 Specification indication . 14
Annex A (normative) How to measure the sight glass illuminance attenuation rate . 15
Bibliography . 16

Figure 1 – Example of measurement environment . 8
Figure 2 – Profile of the high temperature operation test . 11
Figure 3 – Profile of the low temperature operation test . 12
Figure 4 – Example of the high temperature high humidity operation test . 13
Figure A.1 – Schematic diagram: Glass sight illuminance attenuation measurement . 15

Table 1 – Camera settings for resolution . 9

IEC 62676-5-1:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
VIDEO SURVEILLANCE SYSTEMS FOR USE –
IN SECURITY APPLICATIONS –
Part 5-1: Data specifications and image quality performance for camera
devices – Environmental test methods for image quality performance

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC
...