SIST EN 61811-1:2015/A2:2026

SLOVENSKI STANDARD
01-november-2026
Elektromehanski telekomunikacijski stikalni releji ocenjene kakovosti - 1. del:
Rodovna specifikacija in okvirna podrobna specifikacija - Dopolnilo A2
Electromechanical telecom elementary relays of assessed quality - Part 1: Generic
specification and blank detail specification
Elektromechanische Telekom-Elementarrelais mit bewerteter Qualität - Teil 1:
Fachgrundspezifikation und Bauartspezifikation
Relais télécom électromagnétiques élémentaires soumis au régime d'assurance qualité -
Partie 1: Spécification générique et spécification particulière cadre
Ta slovenski standard je istoveten z: EN 61811-1:2015/A2:2026
ICS:
29.120.70 Releji Relays
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61811-1:2015/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2026
ICS 29.120.70
English Version
Electromechanical telecom elementary relays of assessed
quality - Part 1: Generic specification and blank detail
specification
(IEC 61811-1:2015/AMD2:2026)
Relais télécom électromagnétiques élémentaires soumis au Amendment 2 - Elektromechanische Telekom-
régime d'assurance qualité - Partie 1: Spécification Elementarrelais mit bewerteter Qualität - Teil 1:
générique et spécification particulière cadre Fachgrundspezifikation und Bauartspezifikation
(IEC 61811-1:2015/AMD2:2026) (IEC 61811-1:2015/AMD2:2026)
This amendment A2 modifies the European Standard EN 61811-1:2015; it was approved by CENELEC on 2026-08-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61811-1:2015/A2:2026 E

European foreword
The text of document 94/1175/CDV, future edition 2 of IEC 61811-1/AMD2, prepared by TC 94
"Electrical relays" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-09-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-09-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61811-1:2015/AMD2:2026 was approved by CENELEC as
a European Standard without any modification.

IEC 61811-1 ®
Edition 2.0 2026-07
INTERNATIONAL
STANDARD
AMENDMENT 2
Electromechanical telecom elementary relays of assessed quality -
Part 1: Generic specification and blank detail specification
ICS 29.120.70  ISBN 978-2-8327-1333-4

IEC 61811-1:2015-01/AMD2:2026-07(en)

IEC 61811-1:2015/AMD2:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Electromechanical telecom elementary relays of assessed quality -
Part 1: Generic specification and blank detail specification

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ens
...