SIST EN 60958-4-1:2016

SLOVENSKI STANDARD
SIST EN 60958-4-1:2016
01-december-2016
1DGRPHãþD
SIST EN 60958-4:2004
'LJLWDOQLDYGLRYPHVQLNGHO3URIHVLRQDOQDXSRUDED=YRþQDYVHELQD,(&

Digital audio interface - Part 4-1: Professional applications - Audio content (IEC 60958-4-
1:2016)
Digitalton-Schnittstelle - Teil 4-1: Professioneller Gebrauch - Toninhalt (IEC 60958-4-
1:2016)
Interface audionumérique - Partie 4-1: Applications professionnelles - Contenu audio
(IEC 60958-4-1:2016)
Ta slovenski standard je istoveten z: EN 60958-4-1:2016
ICS:
33.160.30 Avdio sistemi Audio systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 60958-4-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60958-4-1:2016

---------------------- Page: 2 ----------------------

SIST EN 60958-4-1:2016


EUROPEAN STANDARD EN 60958-4-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 33.160.30 Supersedes EN 60958-4:2003 (partially)
English Version
Digital audio interface -
Part 4-1: Professional applications - Audio content
(IEC 60958-4-1:2016)
Interface audionumérique -  Digitalton-Schnittstelle -
Partie 4-1: Applications professionnelles - Contenu audio Teil 4-1: Professioneller Gebrauch - Toninhalt
(IEC 60958-4-1:2016) (IEC 60958-4-1:2016)
This European Standard was approved by CENELEC on 2016-04-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60958-4-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60958-4-1:2016
EN 60958-4-1:2016
European foreword
The text of document 100/2452/CDV, future edition 1 of IEC 60958-4-1, prepared by Technical Area 4
"Digital system interfaces and protocols", of IEC/TC 100 "Audio, video and multimedia systems and
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60958-4-1:2016.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-01-28
national level by publication of an identical national
standard or by endorsement
(dow) 2019-04-28
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document, together with EN 60958-4-2:2016 and EN 60958-4-4:2016, supersedes EN 60958-4:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60958-4-1:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60958 NOTE Harmonized in EN 60958 series.
IEC 60958-3 NOTE Harmonized as EN 60958-3.

2

---------------------- Page: 4 ----------------------

SIST EN 60958-4-1:2016
EN 60958-4-1:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60958-1 -  Digital audio interface - EN 60958-1 -
Part 1: General
IEC 60958-4-2 -  Digital audio interface - EN 60958-4-2 -
Part 4-2: Professional applications -
Metadata and subcode
IEC 60958-4-4 -  Digital audio interface - EN 60958-4-4 -
Part 4-4: Professional applications -
Physical and electrical parameters
ITU-R -  Transmission standards for FM sound - -
Recommendation broadcasting at VHF
BS.450-3
ITU-T -  Pre-emphasis used on sound- - -
Recommendation programme circuits
J.17
AES5-2008 (r2013) -  AES recommended practice for - -
professional digital audio - Preferred
sampling frequencies for applications
employing pulse-code modulation

3

---------------------- Page: 5 ----------------------

SIST EN 60958-4-1:2016

---------------------- Page: 6 ----------------------

SIST EN 60958-4-1:2016



IEC 60958-4-1

®


Edition 1.0 2016-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Digital audio interface –

Part 4-1: Professional applications – Audio content




Interface audionumérique –

Partie 4-1: Applications professionnelles – Contenu audio
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.160.30 ISBN 978-2-8322-3232-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60958-4-1:2016
– 2 – IEC 60958-4-1:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 6
4 Audio content . 7
4.1 Audio content coding . 7
4.2 PCM polarity . 7
4.3 Coding precision options . 7
4.4 Intermediate coding precision . 8
4.5 Non-audio content . 8
4.6 DC content . 8
5 Sampling frequency . 8
5.1 Channel interdependency . 8
5.2 Choice of sampling frequency . 8
6 Validity bit . 8
6.1 Channel validity usage . 8
6.2 Independent channel validity . 8
7 Pre-emphasis . 8
7.1 Pre-emphasis characteristic . 8
7.2 Pre-emphasis indication . 9
Bibliography . 10

---------------------- Page: 8 ----------------------

SIST EN 60958-4-1:2016
IEC 60958-4-1:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_______________

DIGITAL AUDIO INTERFACE –

Part 4-1: Professional applications – Audio content

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
...