SIST EN 61784-5-11:2014

SLOVENSKI STANDARD
SIST EN 61784-5-11:2014
01-april-2014
1DGRPHãþD
SIST EN 61784-5-11:2012
Industrijska komunikacijska omrežja - Profili - 5-11. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 11 (IEC 61784-5-11:2013)
Industrial communication networks - Profiles -- Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
Industrielle Kommunikationsnetze - Profile -- Teil 5-11: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 11
Réseaux de communication industriels - Profils -- Partie 5-11: Installation des bus de
terrain - Profils d'installation pour CPF 11
Ta slovenski standard je istoveten z: EN 61784-5-11:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
SIST EN 61784-5-11:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-5-11:2014

---------------------- Page: 2 ----------------------

SIST EN 61784-5-11:2014

EUROPEAN STANDARD
EN 61784-5-11

NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-11:2012


English version


Industrial communication networks -
Profiles -
Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
(IEC 61784-5-11:2013)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-11: Installation des bus de terrain Teil 5-11: Feldbusinstallation -
- Profils d'installation pour CPF 11 Installationsprofile für die
(CEI 61784-5-11:2013) Kommunikationsprofilfamilie 11
(IEC 61784-5-11:2013)




This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-11:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61784-5-11:2014
EN 61784-5-11:2013 - 2 -
Foreword
The text of document 65C/738/FDIS, future edition 3 of IEC 61784-5-11, prepared by
SC 65C "Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61784-5-11:2013.

The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61784-5-11:2012.

EN 61784-5-11:2013 includes the following significant technical changes with respect to
EN 61784-5-11:2012:
– addition of a new Annex C (normative).

This standard is to be used in conjunction with EN 61918:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61784-5-11:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61784-5-11:2014
- 3 - EN 61784-5-11:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Annex ZA of EN 61918:2013 applies, except as follows:

Publication Year Title EN/HD Year
Addition to Annex ZA of EN 61918:2013:
IEC 61918 2013 Industrial communication networks - EN 61918 2013
Installation of communication networks in
industrial premises

---------------------- Page: 5 ----------------------

SIST EN 61784-5-11:2014

---------------------- Page: 6 ----------------------

SIST EN 61784-5-11:2014




IEC 61784-5-11

®


Edition 3.0 2013-09




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Industrial communication networks – Profiles –

Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11




Réseaux de communication industriels – Profils –

Partie 5-11: Installation des bus de terrain – Profils d'installation pour CPF 11
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX X


ICS 25.040.40; 35.100.40 ISBN 978-2-8322-1062-8



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61784-5-11:2014
– 2 – 61784-5-11 © IEC:2013
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 11
4 CPF 11: Overview of installation profiles . 11
5 Installation profile conventions . 11
6 Conformance to installation profiles . 12
Annex A (normative) CP 11/1 (TCnet-star) specific installation profile . 14
A.1 Installation profile scope . 14
A.2 Normative references . 14
A.3 Installation profile terms, definitions, and abbreviated terms . 14
A.4 Installation planning . 14
A.4.1 General . 14
A.4.2 Planning requirements . 14
A.4.2.1 Safety . 14
A.4.2.2 Security . 14
A.4.2.3 Environmental considerations and EMC . 14
A.4.2.4 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 14
A.4.3 Network capabilities . 14
A.4.3.1 Network topology . 14
A.4.3.2 Network characteristics . 15
A.4.4 Selection and use of cabling components . 17
A.4.4.1 Cable selection . 17
A.4.4.2 Connecting hardware selection . 18
A.4.4.3 Connections within a channel/permanent link . 20
A.4.4.4 Terminators . 20
A.4.4.5 Device location and connection . 20
A.4.4.6 Coding and labelling . 20
A.4.4.7 Earthing and bonding of equipment and devices and shielded
cabling . 20
A.4.4.8 Storage and transportation of cables . 20
A.4.4.9 Routing of cables . 20
A.4.4.10 Separation of circuit . 20
A.4.4.11 Mechanical protection of cabling components . 21
A.4.4.12 Installation in special areas . 21
A.4.5 Cabling planning documentation . 21
A.4.6 Verification of cabling planning specification . 21
A.5 Installation implementation . 21
A.5.1 General requirements . 21
A.5.2 Cable installation . 21
A.5.2.1 General requirements for all cabling types . 21
A.5.2.2 Installation and routing . 22
A.5.2.3 Specific requirements for CPs . 22

---------------------- Page: 8 ----------------------

SIST EN 61784-5-11:2014
61784-5-11 © IEC:2013 – 3 –
A.5.2.4 Specific requirements for wireless installation . 22
A.5.2.5 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 22
A.5.3 Connector installation . 22
A.5.4 Terminator installation . 22
A.5.5 Device installation . 22
A.5.6 Coding and labelling . 22
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 22
A.5.8 As-implemented cabling documentation . 22
A.6 Installation verification and installation acceptance test . 22
A.6.1 General . 22
A.6.2 Installation verification . 22
A.6.2.1 General . 22
A.6.2.2 Verification according to cabling planning documentation . 22
A.6.2.3 Verification of earthing and bonding . 22
A.6.2.4 Verification of shield earthing . 22
A.6.2.5 Verification of cabling system . 22
A.6.2.6 Cable selection verification . 22
A.6.2.7 Connector verification . 23
A.6.2.8 Connection verification . 23
A.6.2.9 Terminators verification . 23
A.6.2.10 Coding and labelling verification . 23
A.6.2.11 Verification report . 23
A.6.3 Installation acceptance test . 23
A.6.3.1 General . 23
A.6.3.2 Acceptance test of Ethernet-based cabling . 23
A.6.3.3 Acceptance test of non-Ethernet-based cabling . 23
A.6.3.4 Specific requirements for wireless installation . 23
A.6.3.5 Acceptance test report . 23
A.7 Installation administration . 23
A.8 Installation maintenance and installation troubleshooting . 23
Annex B (normative) CP 11/2 (TCnet-loop 100) specific installation profile . 24
B.1 Installation profile scope . 24
B.2 Normative references . 24
B.3 Installation profile terms, definitions, and abbreviated terms . 24
B.4 Installation planning . 24
B.4.1 General . 24
B.4.2 Planning requirements . 24
B.4.2.1 Safety . 24
B.4.2.2 Security . 24
B.4.2.3 Environmental considerations and EMC . 24
B.4.2.4 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 24
B.4.3 Network capabilities . 24
B.4.3.1 Network topology . 24
B.4.3.2 Network characteristics . 24
B.4.4 Selection and use of cabling components . 27
B.4.4.1 Cable selection . 27

---------------------- Page: 9 ----------------------

SIST EN 61784-5-11:2014
– 4 – 61784-5-11 © IEC:2013
B.4.4.2 Connecting hardware selection . 28
B.4.4.3 Connections within a channel/permanent link . 30
B.4.4.4 Terminators . 30
B.4.4.5 Device location and connection . 30
B.4.4.6 Coding and labelling . 30
B.4.4.7 Earthing and bonding of equipment and devices and shielded
cabling . 30
B.4.4.8 Storage and transportation of cables . 30
B.4.4.9 Routing of cables . 30
B.4.4.10 Separation of circuit . 30
B.4.4.11 Mechanical protection of cabling components . 31
B.4.4.12 Installation in special areas . 31
B.4.5 Cabling planning documentation . 31
B.4.6 Verification of cabling planning specification . 31
B.5 Installation implementation . 31
B.5.1 General requirements . 31
B.5.2 Cable installation . 31
B.5.2.1 General requirements for all cabling types . 31
B.5.2.2 Installation and routing . 32
B.5.2.3 Specific requirements for CPs . 32
B.5.2.4 Specific requirements for wireless installation . 32
B.5.2.5 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 32
B.5.3 Connector installation . 32
B.5.4 Terminator installation . 32
B.5.5 Device installation . 32
B.5.6 Coding and labelling . 32
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 32
B.5.8 As-implemented cabling documentation . 33
B.6 Installation verification and installation acceptance test . 33
B.6.1 General . 33
B.6.2 Installation verification . 33
B.6.2.1 General . 33
B.6.2.2 Verification according to cabling planning documentation . 33
B.6.2.3 Verification of earthing and bonding . 33
B.6.2.4 Verification of shield earthing . 33
B.6.2.5 Verification of cabling system . 33
B.6.2.6 Cable selection verification . 33
B.6.2.7 Connector verification . 33
B.6.2.8 Connection verification . 33
B.6.2.9 Terminators verification . 33
B.6.2.10 Coding and labelling verification . 33
B.6.2.11 Verification report . 33
B.6.3 Installation acceptance test . 33
B.6.3.1 General . 33
B.6.3.2 Acceptance test of Ethernet-based cabling . 33
B.6.3.3 Acceptance test of non-Ethernet-based cabling . 33
B.6.3.4 Specific requirements for wireless installation . 33
B.6.3.5 Acceptance test report . 34

---------------------- Page: 10 ----------------------

SIST EN 61784-5-11:2014
61784-5-11 © IEC:2013 – 5 –
B.7 Installation administration . 34
B.8 Installation maintenance and installation troubleshooting . 34
Annex C (normative) CP 11/3 (TCnet-loop 1G) specific installation profile . 35
C.1 Installation profile scope . 35
C.2 Normative references . 35
C.3 Installation profile terms, definitions, and abbreviated terms . 35
C.4 Installation planning . 35
C.4.1 General . 35
C.4.2 Planning requirements . 35
C.4.2.1 Safety . 35
C.4.2.2 Security . 35
C.4.2.3 Environmental considerations and EMC . 35
C.4.2.4 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 35
C.4.3 Network capabilities . 35
C.4.3.1 Network topology . 35
C.4.3.2 Network characteristics . 35
C.4.4 Selection and use of cabling components . 37
C.4.4.1 Cable selection . 37
C.4.4.2 Connecting hardware selection . 37
C.4.4.3 Connections within a channel/permanent link . 38
C.4.4.4 Terminators . 38
C.4.4.5 Device location and connection . 39
C.4.4.6 Coding and labelling . 39
C.4.4.7 Earthing and bonding of equipment and devices and shielded
cabling . 39
C.4.4.8 Storage and transportation of cables . 39
C.4.4.9 Routing of cables . 39
C.4.4.10 Separation of circuit . 39
C.4.4.11 Mechanical protection of cabling components . 39
C.4.4.12 Installation in special areas . 39
C.4.5 Cabling planning documentation . 39
C.4.6 Verification of cabling planning specification . 39
C.5 Installation implementation . 40
C.5.1 General requirements . 40
C.5.2 Cable installation . 40
C.5.2.1 General requirements for all cabling types . 40
C.5.2.2 Installation and routing . 40
C.5.2.3 Specific requirements for CPs . 40
C.5.2.4 Specific requirements for wireless installation . 40
C.5.2.5 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 40
C.5.3 Connector installation . 40
C.5.4 Terminator installation . 40
C.5.5 Device installation . 40
C.5.6 Coding and labelling . 40
C.5.7 Earthing and bonding of equipment and devices and shield cabling . 40
C.5.8 As-implemented cabling documentation . 41

---------------------- Page: 11 ----------------------

SIST EN 61784-5-11:2014
– 6 – 61784-5-11 © IEC:2013
C.6 Installation verification and installation acceptance test . 41
C.6.1 General . 41
C.6.2 Installation verification . 41
C.6.2.1 General . 41
C.6.2.2 Verification according to cabling planning documentation . 41
C.6.2.3 Verification of earthing and bonding . 41
C.6.2.4 Verification of shield earthing . 41
C.6.2.5 Verification of cabling system . 41
C.6.2.6 Cable selection verification . 41
C
...