SIST EN 302 885-2 V1.1.1:2011
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels.
The present document also specifies technical characteristics, methods of measurement and required test results.
- Status
- Published
- Publication Date
- 16-Oct-2011
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 30-Sep-2011
- Due Date
- 05-Dec-2011
- Completion Date
- 17-Oct-2011
Buy Documents
en_30288502v010101o - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
en_30288502v010101p - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 885-2 V1.1.1:2011 is the Slovenian adoption of ETSI EN 302 885-2 V1.1.1, a Harmonized European Standard for portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service with integrated handheld class D DSC. It covers the essential requirements of article 3.2 of the R&TTE Directive and sets the technical characteristics, measurement methods, and required test results used to assess radio performance and spectrum use.
It is aimed at manufacturers, suppliers, and test laboratories that need to verify conformity of portable maritime VHF radiotelephones.
What does SIST EN 302 885-2 V1.1.1:2011 specify?
SIST EN 302 885-2 V1.1.1:2011 specifies the minimum technical characteristics and methods of measurement for portable VHF radiotelephones with integrated handheld class D DSC operating in certain maritime mobile service bands. The equipment may use either 25 kHz channels or a mix of 25 kHz and 12.5 kHz channels.
The document is organized into scope, references, definitions and abbreviations, technical requirements, test methods, and two annexes.
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements and conformance Test specifications Table (HS-RTT) for presumption of conformity under article 3.2 |
| Annex B | The EN title in the official languages |
What are the key requirements of SIST EN 302 885-2 V1.1.1:2011?
SIST EN 302 885-2 V1.1.1:2011 ties each essential requirement to a defined test and to limits taken from EN 302 885-1. In practice, this means the product is assessed through a structured set of transmitter, DSC, and receiver checks rather than a single pass/fail test.
Environmental and test conditions
Clause 4.1 requires testing within the declared operational environmental profile and at representative points within its boundary limits. For the reader, this means the equipment must keep meeting the standard across the environmental conditions it is declared to withstand, not only in one laboratory condition.
Clause 5.1 points to the test conditions, power supply, and ambient temperatures in EN 302 885-1. Clause 5.2 then requires the measured value to be compared with the corresponding limit, and the measurement uncertainty to be reported and kept within the table in clause 5.2. This matters because the test report must support the conformity claim, not just record a number.
Transmitter performance
Clauses 4.2.1 to 4.2.8 cover transmitter frequency error, carrier power, maximum frequency deviation, reduction of deviation above 3 kHz, adjacent channel power, spurious emissions, cabinet radiation, and transient frequency behaviour. These checks show whether the transmitter stays on frequency, uses the right power, and avoids unwanted emissions that could interfere with other maritime channels.
DSC signaling and channel 70
Clauses 4.2.9 to 4.2.12 cover DSC frequency error, DSC modulation index, DSC modulation rate, and testing of free channel transmission on DSC channel 70. In practice, these requirements verify that the digital selective calling function is transmitted correctly and that channel 70 behaves as intended for distress and safety signaling.
Receiver performance
Clauses 4.2.13 to 4.2.20 cover maximum usable sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response, blocking or desensitization, and conducted and radiated spurious emissions. These requirements matter because they show whether the receiver can hear weak maritime signals while rejecting interference from nearby or strong unwanted signals.
Test suite structure
Clause 5 separates the Essential Radio Test Suite from the other receiver test specifications. Annex A marks which tests are essential for the presumption of conformity and which are other tests. For users, this helps distinguish the core compliance evidence from additional supporting verification.
What terms does SIST EN 302 885-2 V1.1.1:2011 define?
SIST EN 302 885-2 V1.1.1:2011 uses two explicit definitions and three abbreviations.
- Environmental profile - the range of environmental conditions within which the equipment must comply with the document.
- Supplier - the entity responsible for placing the equipment on the market under the R&TTE Directive.
- GMDSS - Global Maritime Distress and Safety System.
- R&TTE - Radio and Telecommunications Terminal Equipment.
- VHF - Very High Frequency.
Who uses SIST EN 302 885-2 V1.1.1:2011?
SIST EN 302 885-2 V1.1.1:2011 is used by manufacturers of portable maritime VHF radiotelephones, compliance engineers, and radio test laboratories. It is also relevant to quality managers and buyers who need evidence that a product has been tested against the essential radio requirements for maritime use. The standard is particularly useful where a product combines voice radio with handheld class D DSC functions and needs documented conformity testing.
Which standards are used with SIST EN 302 885-2 V1.1.1:2011?
SIST EN 302 885-2 V1.1.1:2011 depends on two normative references:
- ETSI EN 302 885-1 - provides the definitions, limits, and detailed test methods that Part 2 points to throughout the transmitter and receiver clauses.
- ETSI TR 100 028-1 - gives the method for handling measurement uncertainties used in clause 5.2.
The foreword also places the document in the same series as ETSI EN 302 885-3, which covers the essential requirements of article 3.3(e) of the R&TTE Directive.
What does the SIST EN 302 885-2 V1.1.1:2011 document contain?
SIST EN 302 885-2 V1.1.1:2011 contains the requirement clauses for transmitter, DSC, and receiver performance, followed by test clauses that point back to EN 302 885-1 for the detailed procedures. It also includes a measurement-uncertainty table in clause 5.2 that test reports must use when interpreting results.
Annex A is the key conformity map: it links each requirement to its test specification and identifies whether the test is part of the Essential Radio Test Suite or the other test suite. Annex B provides the EN title in the official languages for publication use.
Buy Documents
en_30288502v010101o - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
en_30288502v010101p - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
FSC International
Forest Stewardship Council certification.
Sponsored listings
Frequently Asked Questions
SIST EN 302 885-2 V1.1.1:2011 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results.
The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results.
SIST EN 302 885-2 V1.1.1:2011 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general; 47.020.70 - Navigation and control equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 885-2 V1.1.1:2011 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 885-2 V1.1.1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone equipment
for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
Reference
DEN/ERM-TG26-086-2
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Transmitter carrier power . 9
4.2.2.1 Definition . 9
4.2.2.2 Limit . 9
4.2.2.3 Conformance . 9
4.2.3 Maximum transmitter frequency deviation . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Transmitter adjacent channel power . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 10
4.2.6 Transmitter conducted spurious emissions conveyed to the antenna . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 Transient frequency behaviour of the transmitter . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.2.9 DSC frequency error (demodulated DSC signal). 10
4.2.9.1 Definition . 10
4.2.9.2 Limit . 11
4.2.9.3 Conformance . 11
4.2.10 DSC modulation index. 11
4.2.10.1 Definition . 11
4.2.10.2 Limit . 11
ETSI
4 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
4.2.10.3 Conformance . 11
4.2.11 DSC modulation rate . 11
4.2.11.1 Definition . 11
4.2.11.2 Limit . 11
4.2.11.3 Conformance . 11
4.2.12 Testing of free channel transmission on DSC channel 70 . 11
4.2.12.1 Definition . 11
4.2.12.2 Limit . 11
4.2.12.3 Conformance . 11
4.2.13 Receiver maximum usable sensitivity . 11
4.2.13.1 Definition . 11
4.2.13.2 Limit . 12
4.2.13.3 Conformance . 12
4.2.14 Receiver co-channel rejection . 12
4.2.14.1 Definition . 12
4.2.14.2 Limit . 12
4.2.14.3 Conformance . 12
4.2.15 Receiver adjacent channel selectivity . 12
4.2.15.1 Definition . 12
4.2.15.2 Limit . 12
4.2.15.3 Conformance . 12
4.2.16 Receiver spurious response rejection . 12
4.2.16.1 Definition . 12
4.2.16.2 Limit . 12
4.2.16.3 Conformance . 12
4.2.17 Receiver intermodulation response . 12
4.2.17.1 Definition . 12
4.2.17.2 Limit . 13
4.2.17.3 Conformance . 13
4.2.18 Receiver blocking or desensitization . 13
4.2.18.1 Definition . 13
4.2.18.2 Limit . 13
4.2.18.3 Conformance . 13
4.2.19 Receiver conducted spurious emissions . 13
4.2.19.1 Definition . 13
4.2.19.2 Limit . 13
4.2.19.3 Conformance . 13
4.2.20 Receiver radiated spurious emissions . 13
4.2.20.1 Definition . 13
4.2.20.2 Limit . 13
4.2.20.3 Conformance . 13
5 Testing for compliance with technical requirements . 14
5.1 Test conditions, power supply and ambient temperatures . 14
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 14
5.3.1 Transmitter frequency error . 14
5.3.2 Transmitter carrier power . 15
5.3.3 Maximum transmitter frequency deviation . 15
5.3.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 15
5.3.5 Transmitter adjacent channel power . 15
5.3.6 Transmitter conducted spurious emissions conveyed to the antenna . 15
5.3.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.8 Transient frequency behaviour of the transmitter . 15
5.3.9 DSC frequency error (demodulated DSC signal). 15
5.3.10 DSC modulation index. 15
5.3.11 DSC modulation rate . 15
5.3.12 Testing of free channel transmission on DSC channel 70 . 15
5.4 Other test specifications . 16
5.4.1 General . 16
5.4.2 Receiver maximum usable sensitivity . 16
ETSI
5 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
5.4.3 Receiver co-channel rejection . 16
5.4.4 Receiver adjacent channel selectivity . 16
5.4.5 Receiver spurious response rejection . 16
5.4.6 Receiver intermodulation response . 16
5.4.7 Receiver blocking or desensitization . 16
5.4.8 Receiver conducted spurious emissions . 16
5.4.9 Receiver radiated spurious emissions . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 20
History . 21
ETSI
6 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards
One-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
7 Final draft ETSI EN 302 885-2 V1.1.1 (2011-05)
1 Scope
The present document states the minimum technical characteristics and methods of measurement required for p
...
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 885-2 V1.1.1 (2011-09)
Reference
DEN/ERM-TG26-086-2
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 885-2 V1.1.1 (2011-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Transmitter carrier power . 9
4.2.2.1 Definition . 9
4.2.2.2 Limit . 9
4.2.2.3 Conformance . 9
4.2.3 Maximum transmitter frequency deviation . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Transmitter adjacent channel power . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 10
4.2.6 Transmitter conducted spurious emissions conveyed to the antenna . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 Transient frequency behaviour of the transmitter . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.2.9 DSC frequency error (demodulated DSC signal). 10
4.2.9.1 Definition . 10
4.2.9.2 Limit . 11
4.2.9.3 Conformance . 11
4.2.10 DSC modulation index. 11
4.2.10.1 Definition . 11
4.2.10.2 Limit . 11
ETSI
4 ETSI EN 302 885-2 V1.1.1 (2011-09)
4.2.10.3 Conformance . 11
4.2.11 DSC modulation rate . 11
4.2.11.1 Definition . 11
4.2.11.2 Limit . 11
4.2.11.3 Conformance . 11
4.2.12 Testing of free channel transmission on DSC channel 70 . 11
4.2.12.1 Definition . 11
4.2.12.2 Limit . 11
4.2.12.3 Conformance . 11
4.2.13 Receiver maximum usable sensitivity . 11
4.2.13.1 Definition . 11
4.2.13.2 Limit . 12
4.2.13.3 Conformance . 12
4.2.14 Receiver co-channel rejection . 12
4.2.14.1 Definition . 12
4.2.14.2 Limit . 12
4.2.14.3 Conformance . 12
4.2.15 Receiver adjacent channel selectivity . 12
4.2.15.1 Definition . 12
4.2.15.2 Limit . 12
4.2.15.3 Conformance . 12
4.2.16 Receiver spurious response rejection . 12
4.2.16.1 Definition . 12
4.2.16.2 Limit . 12
4.2.16.3 Conformance . 12
4.2.17 Receiver intermodulation response . 12
4.2.17.1 Definition . 12
4.2.17.2 Limit . 13
4.2.17.3 Conformance . 13
4.2.18 Receiver blocking or desensitization . 13
4.2.18.1 Definition . 13
4.2.18.2 Limit . 13
4.2.18.3 Conformance . 13
4.2.19 Receiver conducted spurious emissions . 13
4.2.19.1 Definition . 13
4.2.19.2 Limit . 13
4.2.19.3 Conformance . 13
4.2.20 Receiver radiated spurious emissions . 13
4.2.20.1 Definition . 13
4.2.20.2 Limit . 13
4.2.20.3 Conformance . 13
5 Testing for compliance with technical requirements . 14
5.1 Test conditions, power supply and ambient temperatures . 14
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 14
5.3.1 Transmitter frequency error . 14
5.3.2 Transmitter carrier power . 15
5.3.3 Maximum transmitter frequency deviation . 15
5.3.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 15
5.3.5 Transmitter adjacent channel power . 15
5.3.6 Transmitter conducted spurious emissions conveyed to the antenna . 15
5.3.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.8 Transient frequency behaviour of the transmitter . 15
5.3.9 DSC frequency error (demodulated DSC signal). 15
5.3.10 DSC modulation index. 15
5.3.11 DSC modulation rate . 15
5.3.12 Testing of free channel transmission on DSC channel 70 . 15
5.4 Other test specifications . 16
5.4.1 General . 16
5.4.2 Receiver maximum usable sensitivity . 16
ETSI
5 ETSI EN 302 885-2 V1.1.1 (2011-09)
5.4.3 Receiver co-channel rejection . 16
5.4.4 Receiver adjacent channel selectivity . 16
5.4.5 Receiver spurious response rejection . 16
5.4.6 Receiver intermodulation response . 16
5.4.7 Receiver blocking or desensitization . 16
5.4.8 Receiver conducted spurious emissions . 16
5.4.9 Receiver radiated spurious emissions . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 20
History . 21
ETSI
6 ETSI EN 302 885-2 V1.1.1 (2011-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 19 September 2011
Date of latest announcement of this EN (doa): 31 December 2011
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2012
Date of withdrawal of any conflicting National Standard (dow): 30 June 2012
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
7 ETSI EN 302 885-2 V1.1.1 (2011-09)
1 Scope
The present document states the minimum technical characteristics and methods of measurement required for portable
Very High Frequency (VHF) radiotelephones with integrated handheld class D DS
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 885-2 Version 1.1.1SIST EN 302 885-2 V1.1.1:2011en01-november-2011SIST EN 302 885-2 V1.1.1:2011SLOVENSKI
STANDARD
Harmonized European Standard SIST EN 302 885-2 V1.1.1:2011
ETSI ETSI EN 302 885-2 V1.1.1 (2011-09) 2
Reference DEN/ERM-TG26-086-2 Keywords DSC, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 885-2 V1.1.1:2011
ETSI ETSI EN 302 885-2 V1.1.1 (2011-09) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter frequency error . 8 4.2.1.1 Definition . 8 4.2.1.2 Limit . 8 4.2.1.3 Conformance . 8 4.2.2 Transmitter carrier power . 9 4.2.2.1 Definition . 9 4.2.2.2 Limit . 9 4.2.2.3 Conformance . 9 4.2.3 Maximum transmitter frequency deviation . 9 4.2.3.1 Definition . 9 4.2.3.2 Limit . 9 4.2.3.3 Conformance . 9 4.2.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 9 4.2.4.1 Definition . 9 4.2.4.2 Limit . 9 4.2.4.3 Conformance . 9 4.2.5 Transmitter adjacent channel power . 9 4.2.5.1 Definition . 9 4.2.5.2 Limit . 9 4.2.5.3 Conformance . 10 4.2.6 Transmitter conducted spurious emissions conveyed to the antenna . 10 4.2.6.1 Definition . 10 4.2.6.2 Limit . 10 4.2.6.3 Conformance . 10 4.2.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 10 4.2.7.1 Definition . 10 4.2.7.2 Limit . 10 4.2.7.3 Conformance . 10 4.2.8 Transient frequency behaviour of the transmitter . 10 4.2.8.1 Definition . 10 4.2.8.2 Limit . 10 4.2.8.3 Conformance . 10 4.2.9 DSC frequency error (demodulated DSC signal). 10 4.2.9.1 Definition . 10 4.2.9.2 Limit . 11 4.2.9.3 Conformance . 11 4.2.10 DSC modulation index. 11 4.2.10.1 Definition . 11 4.2.10.2 Limit . 11 SIST EN 302 885-2 V1.1.1:2011
ETSI ETSI EN 302 885-2 V1.1.1 (2011-09) 4 4.2.10.3 Conformance . 11 4.2.11 DSC modulation rate . 11 4.2.11.1 Definition . 11 4.2.11.2 Limit . 11 4.2.11.3 Conformance . 11 4.2.12 Testing of free channel transmission on DSC channel 70 . 11 4.2.12.1 Definition . 11 4.2.12.2 Limit . 11 4.2.12.3 Conformance . 11 4.2.13 Receiver maximum usable sensitivity . 11 4.2.13.1 Definition . 11 4.2.13.2 Limit . 12 4.2.13.3 Conformance . 12 4.2.14 Receiver co-channel rejection . 12 4.2.14.1 Definition . 12 4.2.14.2 Limit . 12 4.2.14.3 Conformance . 12 4.2.15 Receiver adjacent channel selectivity . 12 4.2.15.1 Definition . 12 4.2.15.2 Limit . 12 4.2.15.3 Conformance . 12 4.2.16 Receiver spurious response rejection . 12 4.2.16.1 Definition . 12 4.2.16.2 Limit . 12 4.2.16.3 Conformance . 12 4.2.17 Receiver intermodulation response . 12 4.2.17.1 Definition . 12 4.2.17.2 Limit . 13 4.2.17.3 Conformance . 13 4.2.18 Receiver blocking or desensitization . 13 4.2.18.1 Definition . 13 4.2.18.2 Limit . 13 4.2.18.3 Conformance . 13 4.2.19 Receiver conducted spurious emissions . 13 4.2.19.1 Definition . 13 4.2.19.2 Limit . 13 4.2.19.3 Conformance . 13 4.2.20 Receiver radiated spurious emissions . 13 4.2.20.1 Definition . 13 4.2.20.2 Limit . 13 4.2.20.3 Conformance . 13 5 Testing for compliance with technical requirements . 14 5.1 Test conditions, power supply and ambient temperatures . 14 5.2 Interpretation of the measurement results . 14 5.3 Essential radio test suites . 14 5.3.1 Transmitter frequency error . 14 5.3.2 Transmitter carrier power . 15 5.3.3 Maximum transmitter frequency deviation . 15 5.3.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 15 5.3.5 Transmitter adjacent channel power . 15 5.3.6 Transmitter conducted spurious emissions conveyed to the antenna . 15 5.3.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 15 5.3.8 Transient frequency behaviour of the transmitter . 15 5.3.9 DSC frequency error (demodulated DSC signal). 15 5.3.10 DSC modulation index. 15 5.3.11 DSC modulation rate . 15 5.3.12 Testing of free channel transmission on DSC channel 70 . 15 5.4 Other test specifications . 16 5.4.1 General . 16 5.4.2 Receiver maximum usable sensitivity . 16 SIST EN 302 885-2 V1.1.1:2011
ETSI ETSI EN 302 885-2 V1.1.1 (2011-09) 5 5.4.3 Receiver co-channel rejection . 16 5.4.4 Receiver adjacent channel selectivity . 16 5.4.5 Receiver spurious response rejection . 16 5.4.6 Receiver intermodulation response . 16 5.4.7 Receiver blocking or desensitization . 16 5.4.8 Receiver conducted spurious emissions . 16 5.4.9 Receiver radiated spurious emissions . 16 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 17 Annex B (informative): The EN title in the official languages . 20 History . 21
ETSI ETSI EN 302 885-2 V1.1.1 (2011-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A. The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC, as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 19 September 2011 Date of latest announcement of this EN (doa): 31 December 2011 Date of latest publication of new National Standard or endorsement of t
...